usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable for JK JIKONG Battery BMS (Models XR04, XR05) Instruction Manual

1. Wprowadzenie

This manual provides instructions for the usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable, designed to facilitate communication between a personal computer (PC) and JK JIKONG Battery Management Systems (BMS) models XR04 and XR05. The cable features a built-in FTDI FT231XS chip, ensuring broad compatibility with various operating systems.

Rysunek 1: The usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable. This image displays the cable with its USB Type-A connector on one end and the RJ11/RJ12 connector on the other, featuring the "usangreen" branding on the USB housing.

2. Zawartość opakowania

Sprawdź, czy w opakowaniu znajdują się wszystkie elementy:

• 1 x usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable

Rysunek 2: Example of the product packaging. The image shows a white and orange pouch with "usangreen" branding, listing product name, batch number, brand, manufacturer, and contact information.

3. Instrukcje konfiguracji

Follow these steps to connect the cable and prepare for communication with your JK JIKONG BMS:

1. Podłącz kabel:
   • Plug the USB Type-A end of the cable into an available USB port on your PC.
   • Connect the RJ11/RJ12 end of the cable to the RS232 port on your JK JIKONG BMS (models XR04 or XR05). Ensure your BMS model has an RS232 communication port.
   

   Rysunek 3: Diagram illustrating the connection of the XR04/XR05-PC cable to the upper computer. The image shows the usangreen USB cable connecting a PC to the RS232 port of a BMS unit.

2. Install FTDI Drivers:

   The cable utilizes an FTDI FT231XS chip, which requires specific drivers for proper operation. These drivers are compatible with various operating systems, including Windows, Mac OS, Linux, Vista, and Wince.

   • Download the latest Virtual COM Port (VCP) drivers from the official FTDI webstrona: ftdichip.com/drivers/vcp-drivers/.
   • Follow the installation instructions provided on the FTDI webwitrynę przeznaczoną dla Twojego konkretnego systemu operacyjnego.
   

   Rysunek 4: Illustration of multi-system compatibility. This image displays logos for Windows 10, Windows 7, Mac OS, Windows 8, Windows XP, Windows Vista, and Linux, indicating broad driver support.

   

   Rysunek 5: Z bliska view of an FTDI chip, highlighting its role in stable performance and durability. The chip is labeled "FTDI CHIP" on a circuit board.
3. Identify the Serial Port:
   • After driver installation, open your PC's "Device Manager" (Windows) or equivalent system utility (Mac/Linux).
   • Locate the newly installed Virtual COM Port (VCP) under "Ports (COM & LPT)". Note the assigned COM port number (e.g., COM3, COM4).

4. Instrukcja obsługi

Once the cable is physically connected and drivers are installed, configure your BMS software for communication:

1. Configure BMS Software:
   • Open the JK JIKONG BMS monitoring or configuration software on your PC.
   • Navigate to the communication settings within the software.
   • Select the COM port number identified in the previous setup step (e.g., COM3).
   • Ensure that other communication parameters, such as baud rate, match the requirements of your specific JK JIKONG BMS model.
   

   Rysunek 6: Screenshot of a Battery Monitor V2.1.9 software interface, showing various battery parameters, cell voltages, and communication settings. The "Port config" section indicates where the COM port would be selected.

2. Nawiąż połączenie:

   Initiate the connection within the BMS software. The software should now be able to communicate with your JK JIKONG BMS, allowing you to monitor parameters, configure settings, and perform diagnostics.

5. Konserwacja

The usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable is designed for durability with a PVC jacket and bare copper wires. To ensure longevity and reliable performance:

• Store the cable in a clean, dry environment when not in use.
• Aby zapobiec uszkodzeniom wewnętrznych przewodów, należy unikać ostrych zgięć i załamań kabla, zwłaszcza w pobliżu złączy.
• Do not expose the cable to extreme temperatures or direct sunlight for extended periods.
• Clean the connectors gently with a dry, lint-free cloth if necessary.

6. Rozwiązywanie Problemów

If you encounter issues while using the usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable, consider the following troubleshooting steps:

• Brak połączenia/urządzenie nierozpoznane:
  • Sprawdź instalację sterownika: Ensure the FTDI VCP drivers are correctly installed. Re-download and install them from the official FTDI webstrona w razie potrzeby.
  • Sprawdź Menedżera urządzeń: Confirm that the Virtual COM Port appears in your PC's Device Manager without any error symbols.
  • Wypróbuj inny port USB: Connect the cable to a different USB port on your PC.
  • Uruchom ponownie komputer: A system restart can sometimes resolve driver recognition issues.
• BMS Software Communication Failure:
  • Prawidłowy port COM: Double-check that the correct COM port is selected in your BMS software, matching the one identified in Device Manager.
  • Baud Rate Mismatch: Ensure the baud rate in the BMS software matches the required baud rate for your JK JIKONG BMS model.
  • Zgodność z BMS: Confirm that your specific JK JIKONG BMS model (XR04, XR05) has an RS232 communication port. This cable is designed for RS232 communication, not CAN.
  • Integralność kabla: Inspect the cable for any visible damage or loose connections.

7. Specyfikacje

8. Informacje o pomocy technicznej

For further assistance, driver downloads, or inquiries regarding the usangreen USB to RJ11/RJ12 RS232 Serial Converter Cable, please refer to the following resources:

• FTDI Official Webstrona: For the latest VCP drivers and technical documentation related to the FTDI chipset, visit ftdichip.com/drivers/vcp-drivers/.
• Contact usangreen: If you require product-specific support or have questions not covered in this manual, please contact us via Amazon Message.