CallToU Wireless Human Sensor Chime

Wstęp

Thank you for choosing the CallToU Wireless Human Sensor Chime. This device is designed to provide reliable motion detection and alerts for various applications, including home security, store entrances, and caregiver monitoring. Please read this manual thoroughly before installation and use to ensure proper operation and to maximize the product's lifespan.

Informacje dotyczące bezpieczeństwa

• Do not expose the receiver to water or high humidity. The transmitter sensor is designed for outdoor use but should not be submerged.
• Keep the device away from direct sunlight and heat sources to prevent damage.
• Use only the specified battery type (AAA x3 for the sensor). Do not mix old and new batteries or different types of batteries.
• Nie próbuj samodzielnie demontować ani naprawiać urządzenia. Skontaktuj się z obsługą klienta, aby uzyskać pomoc.
• Ensure the sensor is installed securely to prevent it from falling.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• 1 x odbiornik
• 1 x Transmitter Sensor
• 1 x Instrukcja obsługi
• 3 x AAA Batteries (for sensor)
• Mounting Screws and Double-sided Tape

Produkt ponadview

The CallToU Wireless Human Sensor Chime consists of a motion sensor (transmitter) and a plug-in receiver. The sensor detects movement and sends a signal to the receiver, which then plays a selected melody and emits a blue light.

Figure 1: Product Components Diagram. This image illustrates the various parts of both the sensor and the receiver, including the infrared sensor window, LED indicator, volume control, melody selection buttons, Micro USB power port, power switch on the sensor, and the AC plug, speaker, and battery compartment on the receiver.

Główne cechy:

• Infrared Motion Detection: Detects human or pet movement within 3-10 meters.
• Komunikacja bezprzewodowa: Up to 150 meters range between sensor and receiver.
• Dostosowywane alerty: 38 selectable melodies and 5 volume levels (0-110dB), including a silent mode.
• Regulowany czujnik: Sensor can be adjusted 180° vertically and 360° horizontally for optimal coverage.
• Alert niskiego poziomu baterii: Red LED indicator on the sensor signals when batteries need replacement.
• Rozszerzalny system: One receiver can pair with up to 38 sensors.

Figure 2: CallToU Human Sensor Chime in operation. This image shows the sensor detecting a person entering a room, triggering the receiver to play a melody and emit a blue light. Key features like 38 sound options, 150m range, expandability, and low battery alert are highlighted.

Konfiguracja i instalacja

1. Install Batteries in the Sensor:

• Otwórz komorę baterii znajdującą się z tyłu czujnika.
• Włóż 3 baterie AAA, zwracając uwagę na właściwą polaryzację.
• Dokładnie zamknij komorę baterii.

2. Mount the Sensor:

The sensor can be mounted using either screws or double-sided tape.

Figure 3: Sensor Installation Steps. This diagram shows two methods for mounting the sensor's bracket (screws or tape), how to attach the sensor to the bracket, and finally, how to turn on the sensor for use.

1. Używanie śrub: Drill two holes in the desired location, insert the wall plugs, and secure the mounting bracket with the provided screws.
2. Using Double-sided Tape: Clean the mounting surface thoroughly. Apply the double-sided tape to the back of the mounting bracket and firmly press it onto the desired location.
3. Attach the sensor unit to the mounted bracket.

3. Position the Sensor:

Adjust the sensor's angle for optimal detection. The sensor can be rotated 180° vertically and 360° horizontally on its bracket.

Figure 4: Sensor Adjustment and Detection Angles. This image demonstrates the sensor's adjustable bracket, allowing for 180-degree vertical and 360-degree horizontal rotation. It also highlights the detection range of 100 degrees horizontally and 15 degrees vertically.

• The detection range is 3-10 meters.
• The detection angle is 15° vertically and 100° horizontally.
• Avoid pointing the sensor directly at heat sources or areas with rapid temperature changes.

4. Plug in the Receiver:

Plug the receiver into a standard AC power outlet in a central location where you wish to receive alerts. The maximum communication range is 150 meters.

Figure 5: System Coverage Example. This image illustrates the chime system's ability to provide reliable notifications from a downstairs entrance sensor to receivers located in different rooms upstairs, demonstrating effective coverage across a multi-story home.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania:

• Transduktor: Use the power switch on the side of the sensor to turn it on or off.
• Odbiornik: The receiver powers on automatically when plugged into an AC outlet. Unplug to turn off.

2. Dostosuj głośność:

The receiver offers 5 volume levels, from 0dB (silent mode) to 110dB.

Figure 6: Volume Adjustment Settings. This diagram illustrates the 5 volume levels available, from 0dB (mute) to 120dB (rock concert equivalent), and suggests using silent mode at night and loud notifications during the day. It also notes that the device remembers the last volume setting after a power cycle.

• Press the volume button on the receiver to cycle through the 5 volume levels.
• Select 0dB for silent mode, where only the blue light indicator will activate upon detection.
• The receiver remembers the last volume setting even after being unplugged.

3. Select Melody:

Choose from 38 different melodies.

• Press the "Next Melody" or "Previous Melody" buttons on the receiver to browse through the available sounds.
• The selected melody will play briefly.

4. Pairing Additional Sensors (Optional):

The receiver can be paired with up to 38 additional sensors.

Figure 7: Expandable System. This image demonstrates how a single receiver can be connected to multiple sensors placed across different areas of a home, highlighting the system's expandability to cover a wide range.

• To pair a new sensor, press and hold the volume button on the receiver for approximately 5 seconds until it emits a short beep and its LED indicator flashes.
• Within 10 seconds, trigger the new sensor by waving your hand in front of it. The receiver will play the selected melody to confirm successful pairing.
• Repeat for each additional sensor.

Konserwacja

Wymiana baterii:

The sensor features a low battery alert function. When the red LED on the sensor blinks, it indicates that the batteries are low and need to be replaced.

Figure 8: Low Battery Alert. This image illustrates the sensor's low battery warning, indicated by a blinking red LED, and shows a battery level graphic transitioning from full to empty, prompting battery replacement.

• Otwórz komorę baterii znajdującą się z tyłu czujnika.
• Wyjmij stare baterie AAA.
• Insert 3 new AAA batteries, ensuring correct polarity.
• Dokładnie zamknij komorę baterii.

Czyszczenie:

• Wytrzyj urządzenia miękką, suchą ściereczką.
• Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.

Rozwiązywanie problemów

Specyfikacje

Gwarancja i wsparcie

This CallToU product comes with a 1-letnia gwarancja from the date of purchase. If you encounter any issues such as missing parts, damage, initial defects, or malfunctions under normal use, please contact us immediately.

To contact support, please go to your Amazon order history, find your purchase, and select "Contact Seller." Our customer service team will assist you promptly.