U-POE-AF

User Manual: Ubiquiti U-POE-AF PoE Adapter

Model: U-POE-AF

Wstęp

This manual provides essential information for the proper installation, operation, and maintenance of the Ubiquiti U-POE-AF PoE Adapter. Please read this manual thoroughly before using the device to ensure optimal performance and safety.

Produkt ponadview

The Ubiquiti U-POE-AF is a compact and efficient Power over Ethernet (PoE) adapter designed to deliver power and data over a single Ethernet cable. It is specifically engineered to power wireless mesh devices, providing a reliable and streamlined solution for network deployments, especially in locations where traditional power outlets are not readily available.

Ubiquiti U-POE-AF PoE Adapter, front view showing two Ethernet ports and PoE branding.

Figure 1: Ubiquiti U-POE-AF PoE Adapter. This image displays the white, rectangular PoE adapter from a slightly angled front view, highlighting its two Ethernet ports at the top and the "PoE" label on its front surface.

Cechy

  • 15W PoE Output: Delivers sufficient power for wireless mesh devices.
  • Kompaktowa konstrukcja: Small, lightweight, and easy to install.
  • Wydajne dostarczanie energii: Provides stable, reliable power over Ethernet cables, eliminating the need for extra power adapters.
  • Ideal for Wireless Mesh Networks: Perfect for powering access points in hard-to-reach locations.
  • Trwała konstrukcja: Designed for long-term reliability and consistent performance.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

  • Ubiquiti U-POE-AF PoE Adapter
  • Płyta montażowa

Organizować coś

  1. Identyfikacja portów: The U-POE-AF adapter has two Ethernet ports. One port is typically labeled "LAN" or "Data In" and connects to your network switch or router. The other port is labeled "PoE" or "Data + Power Out" and connects to your PoE-compatible device (e.g., wireless access point).
  2. Połącz z siecią: Connect an Ethernet cable from your network switch or router to the "LAN" or "Data In" port on the U-POE-AF adapter.
  3. Połącz z urządzeniem: Connect another Ethernet cable from the "PoE" or "Data + Power Out" port on the U-POE-AF adapter to the Ethernet port of your wireless mesh device.
  4. Włączanie: Plug the power cord of the U-POE-AF adapter into a standard electrical outlet. The adapter will then supply power and data to your connected PoE device.
  5. Sprawdź połączenie: Check the status indicators on both the adapter and your connected device to ensure a successful power and data link.

Instrukcja obsługi

Once properly set up, the Ubiquiti U-POE-AF adapter operates automatically. It provides continuous power and data connectivity to the connected PoE device as long as it is plugged into a power source and connected to the network.

  • Ensure the adapter is placed in a well-ventilated area to prevent overheating.
  • Nie zasłaniaj otworów wentylacyjnych.
  • Avoid exposing the adapter to moisture or extreme temperatures.

Konserwacja

The Ubiquiti U-POE-AF PoE Adapter requires minimal maintenance. Follow these guidelines to ensure its longevity:

  • Czyszczenie: Do czyszczenia zewnętrznej części adaptera należy używać miękkiej, suchej ściereczki. Nie należy używać płynnych środków czyszczących ani aerozoli.
  • Środowisko: Keep the adapter in a clean, dry environment, away from dust and direct sunlight.
  • Zarządzanie kablami: Ensure Ethernet cables are not kinked or excessively bent, which can damage the internal wires.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Brak zasilania podłączonego urządzenia.Adapter not plugged in; faulty power outlet; incorrect cable connection; device not PoE compatible.Ensure adapter is securely plugged into a working outlet. Verify Ethernet cables are correctly connected to the "LAN" and "PoE" ports. Confirm your device supports PoE.
Brak połączenia danych.Faulty Ethernet cable; network issue; incorrect port connection.Test Ethernet cables. Check network switch/router status. Ensure the "LAN" port is connected to the network and "PoE" to the device.
Adapter is hot.Słaba wentylacja, nadmierne obciążenie.Ensure adequate airflow around the adapter. Do not cover it. If overheating persists, disconnect and contact support.

Specyfikacje

AtrybutWartość
ModelU-POE-AF
Wyjście PoE15 W
ProducentWszechobecny
ASINB0DW4L6773
Data pierwszej dostępności5 lutego 2025 r.

Gwarancja i wsparcie

Aby uzyskać informacje dotyczące gwarancji i pomocy technicznej, zapoznaj się z oficjalną stroną Ubiquiti webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon zakupu na wypadek reklamacji.

Note: As the brand is listed as "Generic" on Amazon, specific warranty details may vary. It is recommended to check the packaging or contact the seller for precise warranty terms.

Powiązane dokumenty - U-POE-AF

Przedview Gigabitowy wstrzykiwacz PoE Ubiquiti U-POE-AF — skrócona instrukcja obsługi
W niniejszym przewodniku zamieszczono podstawowe informacje na temat urządzenia Ubiquiti U-POE-AF Gigabit PoE Injector, w tym informacje o zawartości opakowania, dane sprzętowe, kroki instalacji, specyfikacje techniczne, instrukcje bezpieczeństwa i informacje o zgodności.
Przedview Instrukcja obsługi adaptera PROCET PT-PGC-AF Gigabit PoE na USB-C
Instrukcja obsługi PROCET PT-PGC-AF, wewnętrznego adaptera Gigabit PoE na USB-C, zapewniającego zasilanie i łączność danych dla urządzeń USB-C. Oferuje wyjście 5 V/2 A, prędkość sieci 10/100/1000 Mb/s i zasięg Ethernet do 100 m.
Przedview Instrukcja instalacji adaptera Ubiquiti PoE+ (2.5G - 30 W)
Instrukcja instalacji krok po kroku adaptera Ubiquiti PoE+ (2.5G - 30 W) obejmująca rozpakowywanie, potrzebne narzędzia i procedury montażu w celu wdrożenia sieci.
Przedview AETEK E59-602/E69-602 Gigabit PoE Extender Plus Datasheet
Detailed specifications and features for AETEK's E59-602 (Indoor) and E69-602 (Outdoor) Gigabit PoE Extender Plus devices, designed to extend network reach and power devices over Ethernet.
Przedview Skrócona instrukcja obsługi Ubiquiti airFiber AF-11
W tym przewodniku znajdują się instrukcje dotyczące instalacji i konfiguracji radia Ubiquiti airFiber AF-11, w tym sprzętu.view, instalacja dupleksera, podłączenie zasilania i procedury wyrównywania.
Przedview Bezpieczeństwo i zgodność adaptera Power Over Ethernet Ubiquiti POE-48-24W
Informacje dotyczące bezpieczeństwa, bezpieczeństwa elektrycznego i deklaracja zgodności adaptera Power Over Ethernet Ubiquiti POE-48-24W. Zawierają one zgodność z dyrektywami UE i przepisami brytyjskimi.