Produkt ponadview
The Graco TriRide 3-in-1 Convertible Car Seat is designed to grow with your child, offering three modes of use to ensure safety and comfort from infancy through childhood. This car seat transitions from a rear-facing harness to a forward-facing harness, and finally to a highback booster.
- Szelki skierowane do tyłu: Dla niemowląt o wadze od 5 do 40 funtów.
- Szelki skierowane do przodu: Dla dzieci o wadze 26.5–65 funtów.
- Podwyższone oparcie: Dla dzieci o wadze 40-100 funtów.
The car seat features the No-Rethread Simply Safe Adjust Harness System, allowing the headrest and harness to adjust simultaneously. It also includes 10 headrest positions and 6 recline positions for optimal fit and installation.

Funkcje bezpieczeństwa
The Graco TriRide is Graco ProtectPlus Engineered, meeting the newest testing standards for side impact and beyond. Its steel-reinforced frame provides enhanced strength and durability.
- Zaprojektowano w technologii Graco ProtectPlus: Tested to new safety standards for frontal, side, rear, and rollover crashes.
- Side-Impact Tested: According to FMVSS 213a with the built-in 5-point harness system.
- Rama wzmocniona stalą: Provides strength and durability.

Konfiguracja i instalacja
The Graco TriRide car seat is designed for straightforward installation. Refer to the labels on the side of the car seat for specific instructions and weight/height requirements for each mode.
Rozpakowywanie i montaż początkowy
Upon unboxing, the car seat requires minimal assembly. The main components are pre-assembled. The primary assembly involves attaching the cup holders.
- Uchwyty na kubki: The two cup holders slide into designated slots on either side of the car seat.
- Infant Inserts: Removable plush head and body inserts are included for infant comfort and support.
Montaż fotelika samochodowego
The car seat is LATCH-equipped for easy installation. It also features open-loop belt guides to properly position your vehicle’s seat belt when used in highback booster mode.

Instrukcja wideo instalacji
Obsługa fotelika samochodowego
Regulacja uprzęży i zagłówka
The No-Rethread Simply Safe Adjust Harness System allows you to adjust the height of the headrest and harness in one motion, ensuring a proper and secure fit as your child grows. There are 10 headrest positions available.

Pozycje leżące
The car seat offers 6 recline positions to keep your child comfortable and to assist with achieving a better installation angle in your vehicle.

Harness Storage
An integrated harness storage compartment keeps the harness safely stored away without removal when transitioning to belt-positioning booster mode.
Przewodnik wideo operacyjny
Konserwacja
Keeping your Graco TriRide car seat clean is simple with its user-friendly design.
- Podkładka do siedzenia: The seat pad is comfortable and machine washable for your convenience.
- Uchwyty na kubki: The two cup holders are easy to clean and can be removed for thorough washing.
- Wkładki: Removable plush head and body inserts can be cleaned as needed.
Rozwiązywanie problemów
If you encounter any issues with your Graco TriRide car seat, please refer to the detailed instruction manual included with your product or contact Graco customer support for assistance.
- Trudność dokręcania: Ensure the LATCH connectors or vehicle seat belt are routed correctly through the designated paths for the current mode of use. Apply firm pressure to the car seat while tightening the straps.
- Child's Head Falling Forward: Verify that the recline angle is appropriate for your child's age and weight, especially in rear-facing mode. The car seat has multiple recline positions to help achieve the correct angle.
- Problemy z regulacją uprzęży: Check that the No-Rethread Simply Safe Adjust Harness System is moving freely and not obstructed. Ensure the headrest is adjusted to the correct height for your child's shoulders.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Maksymalna zalecana waga | 100 funtów |
| Zalecenia dotyczące minimalnej wagi | 5 funtów |
| Maximum Height Recommended | 57 cali |
| Rear Facing Maximum Weight | 40 funtów |
| Forward Facing Maximum Weight | 100 funtów |
| Rear Facing Minimum Weight | 5 funtów |
| Forward Facing Minimum Weight | 26.5 funtów |
| Rear Facing Car Seat Maximum Height | 32 cali |
| Typ instalacji | Zatrzask |
| Orientacja | Tył licowy |
| Typ uprzęży | 5-punktowy |
| Liczba pozycji wysokości | 10 |
| Wymiary przedmiotu Dł. x Szer. x Wys. | 20" gł. x 19" szer. x 23.25" wys. |
| Waga przedmiotu | 18.45 funtów |
| Typ materiału | Poliester |
Gwarancja i wsparcie
For warranty information, product registration, or customer support, please refer to the warranty card included with your Graco TriRide car seat or visit the official Graco website. Contact information for customer service is typically provided in the product manual.