SZPOWER 4500LM 254 LED Solar Flood Light (B0DNJHWB2S)

SZPOWER 4500LM 254 LED Solar Flood Light User Manual

Model: 4500LM 254 LED Solar Flood Light (B0DNJHWB2S)

1. Wprowadzenie

Thank you for choosing the SZPOWER 4500LM 254 LED Solar Flood Light. This manual provides essential information for the safe and efficient operation of your new solar lights. Please read these instructions carefully before installation and retain them for future reference.

Środki ostrożności

  • Aby zapewnić optymalne ładowanie, upewnij się, że panel słoneczny jest wystawiony na bezpośrednie działanie promieni słonecznych.
  • Nie należy podejmować prób demontażu ani modyfikacji produktu. Może to spowodować unieważnienie gwarancji i zagrożenie bezpieczeństwa.
  • Trzymać produkt z dala od ognia i źródeł ciepła.
  • Install the light securely to prevent it from falling.
  • Avoid looking directly into the LED lights when they are on, as this may cause temporary vision impairment.

2. Zawartość opakowania

Sprawdź przesyłkę, aby upewnić się, że wszystkie przedmioty znajdują się w niej i są w dobrym stanie:

  • SZPOWER 4500LM 254 LED Solar Flood Light (2 units)
  • Remote Control (2 units)
  • Mounting Screws and Wall Plugs (sufficient for 2 units)
  • Instrukcja obsługi (ten dokument)
Two SZPOWER 4500LM 254 LED Solar Flood Lights with remote controls

Image: Two SZPOWER 4500LM 254 LED Solar Flood Lights, each with a solar panel, four adjustable light heads, two motion sensors, and a remote control. This image displays the complete product package.

3. Funkcje produktu

  • Wysoka jasność: Equipped with 254 super bright LED beads, providing 4500 lumens and 6500K white daylight.
  • Regulowana jasność: 3-level adjustable brightness (100%/60%/30%) to suit various needs.
  • Podwójne czujniki ruchu: Two upgraded PIR motion sensors detect movement within 32 feet at a 180° angle.
  • Four Adjustable Heads: Four rotatable light heads offer 270° wide-angle lighting coverage.
  • Wiele trybów oświetlenia: Three distinct lighting modes for versatile operation, controllable via remote.
  • Wydajne ładowanie słoneczne: High-efficiency solar panel with an 18.5% conversion rate, fully charging the 1800mAh battery in approximately 4 hours of direct sunlight.
  • Długie godziny pracy: A fully charged battery can support up to 420 motion detections.
  • Trwała konstrukcja: Klasa wodoodporności IP65 gwarantuje niezawodną pracę w różnych warunkach pogodowych.
  • Bezprzewodowy pilot zdalnego sterowania: Conveniently switch modes and adjust brightness from a distance.
High efficiency solar panel charging in cloudy and sunny conditions

Image: Illustration showing the high efficiency solar panel. It depicts charging performance in both cloudy (60% efficiency) and sunny (100% efficiency) conditions over 4 hours, compared to ordinary solar lights.

Comparison of two motion sensors versus one motion sensor

Image: A comparison illustrating the detection range of two motion sensors (180° angle, 32ft distance) versus a single motion sensor (90° angle, 15ft distance). The dual sensor design provides broader coverage.

4. Specyfikacje

AtrybutSpecyfikacja
MarkaSZPOWER
Model4500LM 254 LED Solar Flood Light
KolorCzarny
TworzywoPlastikowy
Formularz oprawy oświetleniowejIluminacja
Jasność4500 lumenów
Ilość diod LED254 diody LED
Temperatura barwowa6500 K (białe światło dzienne)
Kąt wykrywania czujnika ruchu180°
Odległość wykrywania czujnika ruchuDo 32 stóp (10 metrów)
Pojemność baterii1800mAh
Czas ładowania słonecznegoOkoło 4 godzin (w bezpośrednim świetle słonecznym)
Stopień wodoodpornościIP65

5. Instalacja

Follow these steps to install your solar flood light:

  1. Wybierz lokalizację: Select an outdoor location where the solar panel can receive at least 4-6 hours of direct sunlight daily. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
  2. Zaznacz otwory wiertnicze: Hold the light in the desired mounting position and mark the locations for the screw holes.
  3. Wiercenie otworów: Use an appropriate drill bit to drill holes at the marked locations. Insert wall plugs if mounting on masonry or concrete.
  4. Zamontuj światło: Align the light with the drilled holes and secure it using the provided screws. Ensure it is firmly attached.
  5. Regulacja głowic świetlnych: Adjust the four light heads to cover the desired lighting area. The heads are rotatable for flexible illumination.
SZPOWER solar flood light mounted on a house illuminating a driveway

Image: An SZPOWER solar flood light mounted above a garage door, illuminating a wide driveway area. The image highlights the broad coverage of the light, estimated at 1600 sq ft.

6. Działanie

Pierwsze użycie

Before first use, ensure the solar light is fully charged. Place it in direct sunlight for at least 6-8 hours. The light will automatically turn on at night and off during the day.

Funkcje pilota zdalnego sterowania

The included remote control allows you to easily switch between lighting modes and adjust brightness:

  • Przycisk WŁ./WYŁ.: Włącza lub wyłącza światło.
  • Przycisk TRYB: Cycles through the three lighting modes (Mode 1, Mode 2, Mode 3).
  • Przyciski +/-: Adjusts the brightness level (100%, 60%, 30%) in applicable modes.
Hand holding remote control pointing at solar light

Image: A hand holding the wireless remote control, pointing towards a mounted solar light on a house. The image indicates a remote control distance of 26.2ft to 32.8ft.

Tryby oświetlenia

The solar light offers three operational modes:

  1. Mode 1: Motion Sensor Mode
    The light remains OFF until motion is detected. Upon detection, it illuminates at 100% brightness for approximately 20 seconds, then turns OFF again.
  2. Tryb 2: Tryb czujnika przyciemniania światła
    The light stays on at a dim brightness (3%) continuously at night. When motion is detected, it brightens to 100% for approximately 20 seconds, then returns to dim brightness.
  3. Mode 3: Always On Mode
    The light stays on at a constant 10% brightness throughout the night, regardless of motion detection.
Three lighting modes of the solar flood light

Image: A visual representation of the three lighting modes: Mode 1 (Motion Sensor Mode) shows the light off until motion, then 100% on; Mode 2 (Dim Light Sensor Mode) shows dim light until motion, then 100% on; Mode 3 (Always On Mode) shows the light continuously on at 10% brightness.

7. Konserwacja

To ensure optimal performance and longevity of your solar flood light, follow these maintenance guidelines:

  • Wyczyść panel słoneczny: Regularnie przecieraj panel słoneczny miękką, miękką szmatką.amp Ściereczką do usuwania kurzu, brudu i zanieczyszczeń. Czysty panel zapewnia maksymalną absorpcję światła słonecznego i wydajność ładowania.
  • Usuń przeszkody: Periodically check that no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel.
  • Sprawdź, czy nie ma uszkodzeń: Occasionally inspect the light for any physical damage, loose screws, or wear and tear.
  • Pielęgnacja baterii: The integrated battery is designed for long-term use. Avoid prolonged storage in a completely discharged state. If storing, ensure the light is fully charged first.
SZPOWER solar flood light operating in heavy rain with lightning

Image: An SZPOWER solar flood light mounted on an outdoor wall, illuminated during a heavy rainstorm with lightning. This image demonstrates the product's IP65 waterproof capability.

8. Rozwiązywanie Problemów

If you encounter issues with your solar flood light, refer to the following common problems and solutions:

  • Światło nie włącza się w nocy:
    • Upewnij się, że światło jest WŁĄCZONE.
    • Sprawdź, czy panel słoneczny otrzymuje wystarczającą ilość bezpośredniego światła słonecznego w ciągu dnia (przynajmniej 4–6 godzin).
    • Check if the light is in the correct operating mode (Mode 1, 2, or 3).
    • The battery might be completely discharged. Allow it to charge for 1-2 sunny days.
  • Light is Dim or Stays On for a Short Period:
    • The battery may not be fully charged due to insufficient sunlight or a dirty solar panel. Clean the panel and ensure optimal sun exposure.
    • Weather conditions (e.g., prolonged cloudy days) can affect charging.
  • Motion Sensor Not Detecting Movement:
    • Upewnij się, że światło jest w trybie 1 lub 2.
    • Sprawdź, czy w polu czujnika nie ma przeszkód. view.
    • Verify the object is within the 32ft detection range and 180° angle.
    • Extreme temperatures can sometimes affect sensor performance.
  • Pilot nie działa:
    • Upewnij się, że między pilotem a światłem nie ma żadnych przeszkód.
    • Sprawdź baterię w pilocie.
    • Ensure you are within the effective range (26.2ft - 32.8ft).

9. Gwarancja i wsparcie

SZPOWER is committed to providing high-quality products. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact SZPOWER customer support.

If you have any questions, require technical assistance, or need to report an issue, please contact our customer support team through the retailer's platform or the official SZPOWER webStrona. Kontaktując się z pomocą techniczną, przygotuj model produktu i informacje o zakupie.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.