1. Koniec produktuview
The MOUNT PRO Single Long Monitor Arm is designed to enhance your workspace ergonomics and maximize desktop space. This adjustable desk mount is compatible with most flat or curved LCD/LED screens ranging from 13 to 32 inches, supporting weights between 4.4 and 19.8 lbs. It features an extra-long arm extending up to 27.76 inches and a taller pole for increased height adjustment, providing superior viewing comfort and flexibility.
The robust gas spring arm ensures smooth and stable adjustments, tested for over 20,000 motion cycles for long-lasting performance. Integrated cable management helps maintain a clean and organized desk. The mount offers full motion adjustability, including tilt, swivel, and rotation, allowing you to customize your screen angle for optimal productivity.
Figure 1.1: MOUNT PRO Single Long Monitor Arm with included mounting options.
Figure 1.2: The MOUNT PRO arm offers an extended reach of 27.7 inches, providing more flexibility for deeper desktops compared to standard monitor arms.
Figure 1.3: The MOUNT PRO monitor arm features a taller pole, allowing for greater height adjustment and enhanced ergonomic viewkomfort.
2. Konfiguracja i instalacja
2.1 Zawartość opakowania
Before beginning installation, please ensure all parts are present. Refer to the included parts list in your product packaging.
2.2 Opcje montażu
The MOUNT PRO monitor arm offers two installation methods: C-Clamp mounting and Grommet mounting. Choose the method best suited for your desk.
Figure 2.1: Two primary methods for mounting the monitor arm to your desk.
C-Clamp Montowanie
- Suitable for desk thickness: 0.39 to 3.15 inches (10-80mm).
- Ensure sufficient clearance at the back edge of your desk for the clamp.
Montaż przelotki
- Suitable for desk thickness: 0.39 to 1.97 inches (10-50mm).
- Requires a pre-drilled hole in your desk with a diameter of 0.39 to 2.36 inches (10-60mm).
Desk Compatibility Considerations
Before mounting, verify your desk's structure and material. Do not install on tempered glass tabletops.
Figure 2.2: Important considerations for desk structure when choosing a mounting location.
2.3 Attaching Your Monitor
The monitor arm supports VESA patterns of 75x75mm and 100x100mm. Ensure your monitor has compatible VESA holes.
- Carefully align the VESA plate on the arm with the mounting holes on the back of your monitor.
- Secure the monitor using the provided screws. Do not overtighten.
- If your monitor has a stand or cover over the VESA holes, remove it before attachment.
Figure 2.3: Monitor compatibility details, including supported size, weight, and VESA patterns.
Figure 2.4: Instructions for checking VESA hole patterns on your monitor.
2.4 Zarządzanie kablami
Poprowadź kable monitora przez zintegrowane kanały do zarządzania kablami na ramieniu, aby zachować porządek w miejscu pracy.
Figure 2.5: Utilize the built-in cable management system for a clean setup and convenient tool storage.
3. Obsługa ramienia monitora
The MOUNT PRO monitor arm provides extensive adjustability to achieve your preferred viewing angle and ergonomic position.
3.1 Regulacja położenia monitora
- Regulacja wysokości: Slide the arm up or down along the pole to set the desired height. The arm can position your monitor up to 28.5 inches above the desktop.
- Przechylenie: Adjust the monitor screen vertically from +85° to -45° to reduce glare and optimize viewing.
- Obracać: Rotate the monitor horizontally up to +/-90° for easy screen sharing or viewpod różnymi kątami.
- Obrót: Obróć monitor o 360°, aby przełączać się między orientacją poziomą i pionową.
- Rozszerzenie: The arm extends up to 27.7 inches, allowing you to pull the monitor closer or push it further away as needed.
Rysunek 3.1: Koniecview of the full range of motion for the monitor arm.
Rysunek 3.2: Szczegółowy view of rotation, tilt, and swivel capabilities.
3.2 Regulacja napięcia sprężyny gazowej
The gas spring tension may need to be adjusted to properly support your monitor's weight. This ensures the monitor stays in place after adjustment.
- To raise the monitor (for lighter monitors): Turn the adjustment screw clockwise (towards '-') to reduce tension.
- To lower the monitor (for heavier monitors): Turn the adjustment screw counter-clockwise (towards '+') to increase tension.
- Always hold the arm in a horizontal position when adjusting tension.
Figure 3.3: Guide for adjusting the gas spring tension to suit your monitor's weight.
4. Konserwacja
To ensure the longevity and optimal performance of your MOUNT PRO monitor arm, follow these simple maintenance guidelines:
- Czyszczenie: Przetrzyj ramię i podstawę miękką ściereczką.amp szmatką. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników, które mogą uszkodzić wykończenie.
- Kontrole okresowe: Okresowo sprawdzaj wszystkie śruby i połączenia, aby upewnić się, że są dobrze dokręcone. W razie potrzeby dokręć je ponownie.
- Gas Spring Durability: The gas spring arm is designed for long-lasting performance, tested to withstand over 20,000 motion cycles. Proper tension adjustment will help maintain its functionality.
Figure 4.1: The gas spring mechanism is engineered for exceptional durability and long-term reliability.
5. Rozwiązywanie Problemów
If you encounter issues with your MOUNT PRO monitor arm, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Monitor arm does not hold position or sags. | Napięcie sprężyny gazowej jest zbyt słabe w stosunku do wagi monitora. | Zwiększ napięcie sprężyny gazowej, obracając śrubę regulacyjną przeciwnie do ruchu wskazówek zegara (w kierunku znaku „+”). Patrz rozdział 3.2. |
| Ramię monitora jest zbyt sztywne, aby je poruszyć. | Napięcie sprężyny gazowej jest zbyt duże. | Zmniejsz napięcie sprężyny gazowej, obracając śrubę regulacyjną zgodnie z ruchem wskazówek zegara (w kierunku „-”). Patrz rozdział 3.2. |
| Monitor chwieje się lub wydaje się niestabilny. | Śruby montażowe są poluzowane lub biurko jest niestabilne. | Ensure all mounting screws (at the VESA plate and desk clamp/grommet) are securely tightened. Verify desk stability. |
| Monitor does not fit the arm. | Incompatible VESA pattern or monitor weight/size. | Check your monitor's VESA pattern (75x75mm or 100x100mm) and ensure its weight (4.4-19.8 lbs) and size (13-32 inches) are within specifications. |
6. Specyfikacje
| Funkcja | Specyfikacja |
|---|---|
| Numer modelu | PR2021B |
| Kompatybilny rozmiar monitora | 13 - 32 cali |
| Nośność | 4.4 - 19.8 funta (2 - 9 kg) |
| Zgodność ze standardem VESA | 75x75mm, 100x100mm |
| Tworzywo | Aluminium |
| Kolor | Czarny |
| Typ montażu | Mocowanie stołowe (C-Clamp lub przelotka) |
| C-Clamp Grubość biurka | 0.39 - 3.15 cala (10 - 80 mm) |
| Grubość przelotki biurka | 0.39 - 1.97 cala (10 - 50 mm) |
| Średnica otworu przelotki | 0.39 - 2.36 cala (10 - 60 mm) |
| Max Height (from desktop) | 28.5 cali |
| Maksymalne rozszerzenie | 27.76 cali |
| Kąt nachylenia | +85° / -45° |
| Kąt obrotu | +/-90° |
| Obrót | 360° |
| Product Dimensions (Parcel) | Wymiary 44.5 x 31.9 x 16.51 cm |
| Product Weight (Parcel) | 4.29 kilogramów |
7. Gwarancja i wsparcie
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official MOUNT PRO website. You may also contact MOUNT PRO customer service directly for assistance with product inquiries, installation guidance, or troubleshooting beyond this manual.