Ultimaxx TTL Flash with LCD for Nikon Cameras

1. Koniec produktuview

The Ultimaxx TTL Flash with LCD is designed to provide versatile and professional lighting for a wide range of Nikon DSLR and mirrorless cameras. It features an intuitive LCD display for easy setting adjustments and supports various flash modes including TTL, Manual, Multi Flash, and Slave modes (S1, S2). The lightweight design ensures it can be mounted directly onto your camera without adding significant bulk, making it suitable for dynamic photography sessions.

Image 1.1: The Ultimaxx TTL Flash unit, shown with its included diffuser and protective carrying case.

2. Co znajduje się w pudełku

Sprawdź, czy w przesyłce znajdują się wszystkie elementy:

• Lampa błyskowa
• Etui ochronne
• Dyfuzor

3. Konfiguracja

3.1. Instalacja baterii

The flash unit requires 4 AA batteries for operation. These are not included in the package. You can use either alkaline or nickel-metal hydride (NiMH) batteries.

1. Znajdź komorę baterii znajdującą się z boku lampy błyskowej.
2. Otwórz pokrywę komory baterii.
3. Włóż 4 baterie AA, zwracając uwagę na prawidłową biegunowość (+/-), zgodnie ze wskazaniami wewnątrz komory.
4. Dokładnie zamknij pokrywę komory baterii.

3.2. Attaching to the Camera

Follow these steps to securely mount the flash unit onto your Nikon camera's hot shoe:

Image 3.1: Visual guide for attaching the flash to a camera.

1. Adjust the Locking Plate: Rotate the locking plate on the flash unit's foot upwards to its highest point.
2. Attach the Speedlite: Slide the flash unit's mounting foot into the hot shoe of your camera. Ensure it is fully seated.
3. Secure the Locking Plate: Rotate the locking plate downwards to tighten and secure the flash unit firmly to the camera's hot shoe.

4. Obsługa lampy błyskowej

4.1. Powering On/Off and LCD Display

To power on the flash, press the WŁ./WYŁ. button. The intuitive LCD display will illuminate, showing current settings and parameters. To power off, press and hold the WŁ./WYŁ. przycisk.

Image 4.1: The LCD display provides clear, backlit information for easy adjustments.

4.2. Panel sterowania zamkniętyview

The flash unit features a user-friendly control panel for adjusting various settings. Refer to the diagram below for button identification:

Image 4.2: Detailed diagram of the flash unit's control panel.

4.3. Tryby lampy błyskowej

The Ultimaxx TTL Flash supports several operating modes:

• TTL (Through The Lens): The flash automatically adjusts its output for accurate and consistent lighting based on the camera's metering system.
• Ręczny (M): Allows you to manually set the flash power output from 1/1 (full power) down to 1/128 for precise control.
• Tryb wielokrotnego błysku: Creates multiple flashes in a single exposure for dynamic, creative effects.
• Slave Modes (S1, S2): Enables the flash to be triggered wirelessly by another flash unit. S1 mode triggers on the first flash, S2 ignores the pre-flash of a TTL system.

4.4. Using the Diffuser and Reflector

• External Diffuser: The included external diffuser can be attached to the flash head to soften harsh light, producing more natural-looking results.
• Wbudowany dyfuzor szerokokątny: Pull out the small white panel from the flash head to engage the built-in wide-angle diffuser, useful for broader light spread.
• Built-in Reflector Board: Pull out the small white card from the flash head to use it as a reflector, bouncing light forward to add catchlights or fill shadows.

4.5. Flash Exposures Bracketing Function (FEB)

This function allows the flash to automatically trigger three consecutive shots with varying exposures (one normal, one underexposed, one overexposed) with a single press of the shutter button. This helps in selecting the optimal lighting for your image.

Image 4.3: The Flash Exposures Bracketing function captures multiple exposures for optimal results.

4.6. Film demonstracyjny produktu

Watch this video for a visual guide on the features and operation of the Ultimaxx TTL Flash:

5. Konserwacja

• Czyszczenie: Use a soft, dry cloth to clean the exterior of the flash unit. For the LCD screen, use a microfiber cloth. Avoid using harsh chemicals or abrasive materials.
• Składowanie: When not in use, store the flash unit in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Baterie: Remove batteries from the flash unit if it will not be used for an extended period to prevent leakage and damage.

6. Rozwiązywanie Problemów

• Lampa błyskowa nie działa:
  • Sprawdź, czy baterie są prawidłowo zainstalowane i czy są wystarczająco naładowane.
  • Sprawdź, czy lampa błyskowa jest pewnie zamocowana na stopce aparatu.
  • Verify camera and flash settings are compatible (e.g., flash enabled in camera menu).
• Niespójna ekspozycja:
  • In TTL mode, ensure the flash head is pointed correctly (e.g., bounced off a ceiling or wall).
  • In Manual mode, adjust power output as needed.
  • Sprawdź, czy między lampą błyskową a obiektem nie ma żadnych przeszkód.
• LCD Not Displaying:
  • Confirm the flash is powered on.
  • Jeśli baterie są słabe, wymień je.

7. Specyfikacje

8. Gwarancja i wsparcie

For warranty information, product support, or service inquiries, please contact Ultimaxx directly through their official channels. Details are typically provided with your purchase documentation or on the manufacturer's webstrona.