Transformers Studio Series Constructicon Long Haul & Hook Instruction Manual

Wstęp

Welcome to the epic world of Transformers! This manual provides detailed instructions for the Transformers Studio Series Constructicon Long Haul and Constructicon Hook 6.5-inch action figures. These figures are designed to convert between robot and vehicle modes, and can also combine with other Constructicon figures (sold separately) to form the mighty Devastator.

Zawartość zestawu:

• 1 x Constructicon Long Haul figure
• 1 x Constructicon Hook figure
• 10 x Accessory pieces (including 2 blaster accessories, 1 trailer, and 7 combiner pieces)
• Arkusze instrukcji

Ważne informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: NIEBEZPIECZEŃSTWO ZADŁAWIENIA – Mogą powstawać drobne elementy. Nieodpowiednie dla dzieci poniżej 3 lat.

Recommended for ages 8+ years.

Accessory Assembly and Storage

The included accessories are crucial for both individual figure play and the combined Devastator mode. When not in use for Devastator, these pieces can be stored on Long Haul's trailer.

1. Assemble Long Haul's Blaster: Connect the two pieces of Long Haul's blaster by aligning the peg and hole.
2. Prepare Devastator's Fists/Rocket Pods: Each black forearm piece (rocket pod) has a purple fist. Connect the fist to the forearm piece. Rotate the fist inward so it is concealed within the forearm piece. Extend the small flip-out peg on each fist.
3. Attach Chest Shield Pieces to Trailer: The trailer piece is also Devastator's waist and legs. Take the central purple chest shield piece and align its two tabs with the slots underneath the trailer, ensuring the pointed sections face the rear. Securely snap into place.
4. Attach Wing Pieces to Trailer: Take the two purple wing pieces. Each wing has a tab and slot. Align these with the corresponding slots and tabs on the sides of the trailer. Note that these connections may not be extremely secure.
5. Attach Fists/Rocket Pods to Trailer: Use the flip-out pegs on the assembled fist/rocket pod units to attach them to the designated ports on the rear sides of the trailer.
6. Attach Long Haul's Blaster to Trailer: The assembled blaster can be pegged into a port on the side of the trailer.

Transformation Instructions: Constructicon Hook

Vehicle Mode to Robot Mode (17 Steps)

1. Ensure Hook is in crane vehicle mode. Detach any accessories.
2. Unpeg the side panels (arms) from the main body.
3. Rotate the silver sections on the underside of the vehicle to reveal the robot feet.
4. Extend the rear section of the vehicle to form the robot legs. Separate the legs.
5. Fold the crane boom over the robot head, securing it against the back of the robot.
6. Rotate the shoulders into position.
7. Adjust the arm panels as needed.
8. Extend the robot head from the chest cavity.

Robot Mode to Vehicle Mode (17 Steps)

1. Retract the robot head into the chest.
2. Fold the crane boom back into its vehicle mode position, securing it over the head.
3. Collapse the robot legs and connect them to form the rear section of the vehicle.
4. Fold the robot feet back into the underside panels.
5. Bring the arm panels forward and peg them into the sides of the vehicle.
6. Ensure all panels are securely tabbed and pegged into place to form a compact crane vehicle.

Transformation Instructions: Constructicon Long Haul

Vehicle Mode to Robot Mode (19 Steps)

1. Ensure Long Haul is in dump truck vehicle mode. Detach any accessories.
2. Open the rear section of the dump truck to begin forming the legs.
3. Extend and separate the leg sections, locking them into place.
4. Unpeg the side panels (arms) from the main body.
5. Open the front hood section of the dump truck to reveal the robot head.
6. Fold the hood section down and back, securing it to form the robot's back.
7. Rotate the arms into position and extend the fists.
8. Adjust the chest and shoulder panels as needed.

Robot Mode to Vehicle Mode (19 Steps)

1. Retract the robot fists and fold the arms into their vehicle mode positions, pegging them to the sides.
2. Collapse the robot legs and connect them to form the rear dump bed of the truck.
3. Fold the robot head back into the chest cavity.
4. Close the front hood section of the truck, ensuring it tabs securely.
5. Ensure all panels are securely tabbed and pegged into place to form a compact dump truck vehicle.

Obsługa i odtwarzanie

Once transformed, both Constructicon Long Haul and Constructicon Hook offer various play possibilities:

• Tryb robota: Utilize the articulated heads, arms, and legs to pose your figures in dynamic action stances. Attach their blaster accessories to their hands for combat scenarios.
• Tryb pojazdu: Roll the figures across surfaces in their respective vehicle forms. Long Haul can tow the included trailer, which can also store Devastator's combiner parts.
• Połączenie: These figures are designed to combine with other Constructicon action figures (each sold separately) to create the larger Devastator figure. Refer to the specific Devastator combination instructions included with your figures for detailed steps.

Konserwacja

To ensure the longevity of your Transformers figures:

• Keep figures clean by wiping with a dry, soft cloth. Avoid harsh chemicals or abrasive materials.
• Przechowuj figurki w miejscu, gdzie nie będą narażone na bezpośrednie działanie promieni słonecznych i ekstremalnych temperatur, aby zapobiec degradacji materiału.
• Handle transformation joints with care to avoid breakage. Do not force parts if they resist movement.

Rozwiązywanie problemów

If you encounter any issues during transformation or play:

• Parts not aligning: Double-check the instruction sheets for the correct sequence of steps. Ensure all tabs and slots are properly aligned before applying pressure.
• Luźne stawy: Over time, joints may become slightly loose. This is generally normal wear and tear for articulated figures.
• Brakujące części: If any components were missing from the original packaging, please contact customer support.

Specyfikacje

Gwarancja i wsparcie

For warranty information, product support, or to inquire about replacement parts, please contact Hasbro customer service directly. Refer to the contact information provided on the product packaging or visit the official Hasbro webstrona.