HAPPYGRILL HG3004

HAPPYGRILL HG3004 Square Picnic Table Bench Set User Manual

Model: HG3004

1. Wprowadzenie

Thank you for choosing the HAPPYGRILL Square Picnic Table Bench Set. This product is designed for outdoor use, providing a durable and comfortable seating solution for 4 to 8 people. Constructed from high-quality HDPE material and a sturdy metal frame, it is built to withstand various weather conditions and offer long-lasting enjoyment. This manual provides essential information for safe assembly, proper usage, and effective maintenance of your picnic table set.

2. Informacje dotyczące bezpieczeństwa

  • Always ensure all holes are aligned before tightening screws during assembly. Failure to do so may result in misaligned screw holes or uneven furniture legs.
  • Do not exceed the maximum weight capacity: 300 lbs for the tabletop and 500 lbs for each bench. Exceeding these limits can compromise stability and safety.
  • Ten produkt jest przeznaczony wyłącznie do użytku na zewnątrz.
  • Podczas montażu małe części i narzędzia montażowe należy trzymać z dala od dzieci.

3. Zawartość opakowania

Your HAPPYGRILL Square Picnic Table Bench Set is shipped in two separate boxes. Please ensure you have received both packages before beginning assembly. Box 2 typically contains the necessary screws and smaller components.

  • Tabletop panels (HDPE)
  • Bench panels (HDPE)
  • Table frame components (Alloy Steel)
  • Bench frame components (Alloy Steel)
  • Hardware pack (screws, washers, nuts)
  • Przewodnik montażu

4. Instrukcja montażu

A screwdriver is recommended for assembly. Please follow the steps carefully. It is advisable to have two people for easier assembly.

  1. Rozpakuj wszystkie komponenty i sprawdź je na liście zawartości opakowania.
  2. Aby zapobiec zarysowaniom, wszystkie części należy rozłożyć na miękkiej i czystej powierzchni.
  3. Attach the table frame components. Important: Do not fully tighten screws until all parts are loosely assembled.
  4. Attach the tabletop panels to the assembled table frame.
  5. Assemble the bench frame components.
  6. Attach the bench panels to the assembled bench frames.
  7. Once all components are in place and aligned, gradually tighten all screws securely.
Diagram showing the dimensions of the HAPPYGRILL Square Picnic Table Bench Set.
Figure 1: Product dimensions for assembly reference. The table measures 67 inches by 67 inches by 30 inches high. The tabletop is 35 inches by 35 inches. Each bench is 35 inches long, 10 inches wide, and 19 inches high.
Z bliska view of the reinforced structure and anti-slip foot pads of the picnic table.
Figure 2: Detail of the sturdy metal construction, including reinforced structure under the tabletop and anti-slip foot pads on the bench legs, ensuring stability.

5. Zastosowanie

This picnic table set is designed to comfortably accommodate 4 to 8 people, making it suitable for family meals, outdoor gatherings, and camping. Its square design allows for versatile placement in various outdoor settings.

Umbrella Hole Feature

The tabletop includes a central umbrella hole with a 1.9-inch diameter and a secure bottom holder. This feature allows you to insert a standard patio umbrella (not included) to provide shade on sunny days. A weighted umbrella base (not included) is required to ensure the umbrella's stability.

HAPPYGRILL picnic table set with an umbrella on a beach.
Figure 3: The picnic table set shown with an umbrella providing shade on a beach. Note that the umbrella and its weighted base are sold separately.
Close-up of the 1.9-inch umbrella hole and the umbrella pole holder.
Rysunek 4: Szczegółowy view of the 1.9-inch diameter umbrella hole in the tabletop and the integrated umbrella pole holder beneath, designed to secure a standard patio umbrella.

6. Pielęgnacja i konserwacja

The HAPPYGRILL picnic table set is constructed from high-quality HDPE material, known for its durability and low maintenance requirements. The material is designed to be all-weather resistant, fade-resistant, and waterproof, preventing cracking or warping.

  • Czyszczenie: Simply wipe down the surfaces of the table and benches with a damp cloth. For tougher stains, a mild soap solution can be used. Avoid harsh abrasive cleaners that may damage the surface.
  • Składowanie: While designed for year-round outdoor use, storing the set in a covered area during extreme weather conditions (e.g., heavy snow, prolonged freezing temperatures) can extend its lifespan.
  • Kontrola: Okresowo sprawdzaj wszystkie śruby i połączenia, aby upewnić się, że są dobrze dokręcone. W razie potrzeby dokręć je, aby zachować integralność konstrukcji.
Close-up of the HDPE tabletop material, highlighting its texture and thickness.
Figure 5: Close-up of the premium HDPE tabletop, illustrating its wood-grain texture, rounded corners, and 1.6-inch thickness, which contribute to its durability and low maintenance.

7. Rozwiązywanie Problemów

If you encounter any issues with your picnic table set, please refer to the following common solutions:

  • Wobbly Table/Benches: Ensure all screws are fully tightened. If the issue persists, check if the ground surface is even. Adjust the placement or use shims if necessary.
  • Misaligned Parts During Assembly: Loosen all screws, realign the components, and then gradually tighten them. Refer to the assembly instructions for correct orientation.
  • Brakujące części: If any parts are missing from your package, please contact HAPPYGRILL customer support with your purchase details.

8. Specyfikacje

FunkcjaSzczegół
MarkaSZCZĘŚLIWY GRILL
Numer modeluHG3004
Wymiary produktu (dł. x szer. x wys.)67" x 67" x 30"
Wymiary blatu stołu (dł. x szer.)35" x 35"
Wymiary ławki (dł. x szer. x wys.)35" x 10" x 19"
Waga przedmiotu59 funtów
Maximum Table Weight Capacity300 funtów
Maximum Bench Weight Capacity500 Pounds (each bench)
Liczba miejsc siedzących4-8 osoby
Materiał ramyStal stopowa
Materiał wierzchniPolietylen o wysokiej gęstości (HDPE)
KolorSzary
KształtKwadrat
Grubość blatu1.6 cali
Średnica otworu parasola1.9 cali
Wymagany montażTak
Narzędzia zalecane do montażuŚrubokręt
Zastosowanie wewnątrz/na zewnątrzPlenerowy

9. Gwarancja i wsparcie

For warranty information or customer support, please refer to your purchase documentation or contact HAPPYGRILL directly through the retailer where the product was purchased. Please have your model number (HG3004) and purchase date available when contacting support.

© 2026 HAPPYGRILL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.