onerbl CR4190, CR4190BT, CR4197, CR4197BT, CR4191

Onerbl AC/DC Adapter Instruction Manual

For Craig Electronics Models: CR4190, CR4190BT, CR4197, CR4197BT, CR4191

Wstęp

This manual provides essential information for the safe and effective use of your Onerbl AC/DC Adapter. This power supply is designed to convert standard AC electrical power into the DC power required by your compatible Craig Electronics portable digital mini tower speaker system, allowing you to operate your device or charge its battery.

The adapter is manufactured with high-quality materials and has been tested to ensure compatibility and reliable performance with the specified models.

Onerbl AC/DC Adapter

Image showing the Onerbl AC/DC adapter with its power cord and plug, ready for connection.

Informacje dotyczące bezpieczeństwa

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the adapter or your device.

  • Tylko do użytku wewnątrz pomieszczeń: Ten adapter jest przeznaczony do użytku wewnątrz pomieszczeń. Nie wystawiaj go na działanie deszczu, wilgoci ani ekstremalnych temperatur.
  • Prawidłowa wentylacja: Ensure the adapter has adequate ventilation. Do not cover it or place it in an enclosed space during operation.
  • Unikaj wody: Do not use the adapter near water or in wet conditions. If the adapter comes into contact with liquid, unplug it immediately.
  • Poprawna cztage: Only connect the adapter to power outlets providing the specified voltage (AC 100-240 V).
  • Zachowaj ostrożność: Nie upuszczaj, nie rozmontowuj ani nie próbuj naprawiać adaptera. W razie potrzeby zleć serwisowanie wykwalifikowanemu personelowi.
  • Odłączaj, gdy nie używasz: Odłącz adapter od gniazdka elektrycznego, jeśli nie będziesz go używać przez dłuższy czas.
  • Integralność kabla: Do not use the adapter if the cord is damaged. Avoid placing heavy objects on the cord or kinking it.

Organizować coś

  1. Sprawdź zgodność: Ensure your device is one of the compatible Craig Electronics models (CR4190, CR4190BT, CR4197, CR4197BT, CR4191).
  2. Połącz z urządzeniem: Insert the adapter's DC output plug firmly into the power input jack of your Craig Electronics speaker system.
  3. Podłącz do gniazdka elektrycznego: Plug the AC input end of the adapter into a standard electrical wall outlet (AC 100-240V, 50/60Hz).
  4. Urządzenie włączające: Once connected, you can power on your speaker system. The adapter will provide power for operation and/or charge the device's internal battery if applicable.

Instrukcja obsługi

The Onerbl AC/DC Adapter operates automatically once connected correctly. It provides a stable power supply to your compatible Craig Electronics device.

  • When connected, the adapter will supply power to your speaker system, allowing it to function.
  • If your speaker system has a rechargeable battery, the adapter will also facilitate charging while connected to a power outlet. Refer to your speaker system's manual for specific charging indicators.
  • The adapter features built-in Over Voltage Protection and Over Heat Protection to safeguard both the adapter and your connected device.

Konserwacja

Proper maintenance ensures the longevity and safe operation of your AC/DC adapter.

  • Czyszczenie: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Składowanie: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly winding the cord to prevent damage.
  • Kontrola: Periodically inspect the adapter and its cord for any signs of damage, such as cuts, fraying, or bent pins. If damage is observed, discontinue use and replace the adapter.

Rozwiązywanie problemów

If you encounter issues with your Onerbl AC/DC Adapter, try the following troubleshooting steps:

ProblemMożliwa przyczynaRozwiązanie
Device not powering on or charging.
  • Adapter nie jest prawidłowo podłączony.
  • Gniazdo zasilania jest nieaktywne.
  • Problem ze zgodnością urządzenia.
  • Uszkodzony adapter lub kabel.
  • Sprawdź, czy oba końce adaptera są solidnie podłączone.
  • Sprawdź gniazdko elektryczne, podłączając do niego inne urządzenie.
  • Confirm your device model is listed as compatible.
  • Inspect the adapter and cable for damage. Replace if damaged.
Adapter jest niezwykle gorący.
  • Słaba wentylacja.
  • Przeciążenie lub usterka wewnętrzna.
  • Unplug the adapter and allow it to cool. Ensure it is in an open area with good airflow.
  • Jeśli przegrzewanie nadal będzie występować, należy zaprzestać używania adaptera i wymienić go.

Jeśli po wypróbowaniu tych kroków problem nadal występuje, skontaktuj się z obsługą klienta.

Specyfikacje

  • Wejście: AC 100-240V, 50/60Hz (Worldwide AC Input)
  • Długość przewodu: Około 6.5 stóp (2 metry)
  • Zabezpieczenia: Ponad tomtagOchrona przed przegrzaniem
  • Zgodne urządzenia: Craig Electronics CR4190, CR4190BT, CR4197, CR4197BT, CR4191 Portable Digital Mini Tower Speaker Systems
  • Marka: Onerbl
  • Producent: Shenzhen Waweis Technology Co., Ltd

Gwarancja i wsparcie

Aby uzyskać informacje o gwarancji lub pomocy technicznej, zapoznaj się z dokumentacją dołączoną do zakupu lub skontaktuj się bezpośrednio ze sprzedawcą. Zachowaj paragon jako dowód zakupu.

© 2023 Onerbl. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.