SM2P Li-Ion Battery Charger

Stunt Racing RC Car Battery Charger User Manual

Model: SM2P Li-Ion Battery Charger | Brand: Generic

Wstęp

This user manual provides essential information for the safe and efficient operation of your SM2P Li-Ion Battery Charger. Please read this manual thoroughly before use and retain it for future reference.

This charger is specifically designed for 3.7V Lithium-Ion (Li-Ion) batteries, commonly used with Stunt Racing RC Cars. It provides a 4.2V output for optimal charging.

Środki ostrożności

Organizować coś

The charger is designed for simple plug-and-play operation. No complex setup is required.

  1. Ensure you have a compatible 3.7V Li-Ion battery for your RC car.
  2. Locate a standard USB power source (e.g., computer USB port, USB wall adapter, power bank).
Two black USB battery chargers with SM2P connectors

Image: Two units of the USB battery charger. Each charger features a standard USB-A plug on one end and an SM2P connector on the other, connected by a black cable. These chargers are designed for 3.7V Li-Ion batteries.

Instrukcja obsługi

Follow these steps to charge your 3.7V Li-Ion battery:

  1. Podłącz ładowarkę do zasilania: Insert the USB-A plug of the charger into a powered USB port. The charger's indicator light (if present) may illuminate to show it's ready.
  2. Podłącz akumulator: Carefully align the SM2P connector of the charger with the corresponding port on your 3.7V Li-Ion battery. Push firmly until it clicks into place. Ensure the polarity is correct.
  3. Proces ładowania: The charger will begin charging the battery. The indicator light may change color (e.g., red for charging, green for fully charged) or turn off when charging is complete. Refer to your battery's specific instructions for typical charging times.
  4. Odłącz po naładowaniu: Once the battery is fully charged, disconnect the battery from the charger, then unplug the charger from the USB power source.

Video: This video demonstrates how to connect the SM2P Li-Ion battery charger to a battery. It shows the USB end of the charger and the SM2P connector, then illustrates the process of connecting the charger's SM2P plug to the battery's corresponding port. This visual guide helps ensure correct and secure connection for charging.

USB charger cable for 3.7V Li-ion batteries

Image: A single USB charger cable with a clear label indicating "USB CHARGER CABLE 3.7V for Li-ion Batteries". The cable features a standard USB-A connector on one end and an SM2P connector on the other, designed for charging compatible Li-ion batteries.

Konserwacja

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Ładowarka nie działa / Brak kontrolkiNo power from USB source; Damaged charger; Incorrect connection.Try a different USB port or power adapter. Check for visible damage to the charger. Ensure connections are secure.
Bateria się nie ładujeBattery incompatible; Battery damaged; Loose connection.Verify battery is 3.7V Li-Ion. Inspect battery for damage. Re-connect battery firmly to charger.

Specyfikacje

Gwarancja i wsparcie

For warranty information or technical support, please contact the seller directly through the platform where the product was purchased. Retain your proof of purchase for any warranty claims.

Sprzedający: VLM Group LLC