Wstęp
Thank you for choosing the MARK ADLER Xeno 7.6 Electric Dual Motor Desk Frame. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new height-adjustable desk frame. Please read this manual carefully before installation and use to ensure proper function and safety.
Informacje dotyczące bezpieczeństwa
Aby zapobiec obrażeniom ciała lub uszkodzeniu produktu, należy przestrzegać następujących wskazówek bezpieczeństwa:
- Nie przekraczaj maksymalnego obciążenia wynoszącego 80 kg (176 funtów).
- Ensure all cables are properly routed and secured to avoid entanglement during height adjustments.
- Podczas pracy urządzenia należy trzymać dzieci i zwierzęta z dala od biurka.
- Use the anti-collision system with caution to prevent damage or injury.
- Do not place hands or other body parts near moving parts of the frame.
- Używaj stelaża biurka wyłącznie wewnątrz pomieszczeń, w suchym otoczeniu.
- If any unusual sounds or movements occur, immediately stop operation and consult the troubleshooting section or contact support.
Konfiguracja i montaż
The MARK ADLER Xeno 7.6 desk frame requires assembly. It is recommended that two people assemble the desk frame for ease and safety.
Zawartość opakowania
Before starting assembly, verify that all components are present. The package includes the electric dual motor desk frame, control panel, and necessary mounting hardware. A desktop is not included and must be purchased separately.
Kroki montażu
- Rozpakuj komponenty: Ostrożnie wyjmij wszystkie części z opakowania i połóż je na czystej, miękkiej powierzchni, aby zapobiec zarysowaniom.
- Assemble Legs and Crossbars: Attach the lifting columns to the feet and then connect the crossbars. Ensure all screws are tightened securely.
- Install Motors and Control Box: Mount the dual motors and the control box according to the diagrams. Connect all motor and power cables to the control box.
- Podłącz panel sterowania: Secure the control panel to the desired location on the desk frame, typically on the front edge.
- Zamontuj pulpit: Place your chosen desktop (120-150 cm width recommended) onto the assembled frame. Secure the desktop to the frame using appropriate screws. The frame supports both left and right-hand L-shaped configurations.
- Zarządzanie kablami: Route all cables neatly using cable ties or clips to prevent them from interfering with the desk's movement.
- Dołącz akcesoria: Install the included headphone hook and bag holder as desired.
Image: MARK ADLER Xeno 7.6 Desk Frame layout showing dimensions and components. The frame is adjustable from 72 cm to 118 cm in height, and accommodates desktops from 105 cm to 150 cm in width on the main section, and 108 cm on the return section, with a depth of 58 cm.
Image: Diagram illustrating the robust and stable construction of the MARK ADLER Xeno 7.6 desk frame, highlighting its dual column design and adjustable width for different desktop sizes.
Instrukcja obsługi
The MARK ADLER Xeno 7.6 desk frame features an intuitive control panel for easy height adjustment and memory functions.
Funkcje panelu sterowania
Image: Close-up of the MARK ADLER Xeno 7.6 control panel, showing the up/down arrows, memory buttons (1, 2, 3), and integrated USB and USB-C charging ports.
- Regulacja wysokości: Użyj ▲ (Up) I ▼ (Down) arrow buttons to manually adjust the desk height. The height range is from 72 cm to 118 cm.
- Ustawienia pamięci: The control panel has three programmable memory positions (1, 2, 3).
- To save a height: Adjust the desk to your desired height. Press the "S" button, then press one of the number buttons (1, 2, Lub 3) within 3 seconds. The display will show "S-" followed by the number to confirm.
- Aby przywołać zapisaną wysokość: Wystarczy nacisnąć odpowiedni przycisk numeryczny (1, 2, Lub 3). Biurko automatycznie przesunie się do zapisanej pozycji.
- Porty ładowania USB: The integrated USB and USB-C ports allow you to conveniently charge your devices directly from the desk.
Image: Graphic illustrating the height adjustment range of the MARK ADLER Xeno 7.6 desk frame, from 72 cm to 118 cm, emphasizing the smooth transition between sitting and standing positions.
Konserwacja
Regular maintenance ensures the longevity and optimal performance of your MARK ADLER Xeno 7.6 desk frame.
- Czyszczenie: Przetrzyj ramę biurka miękką szmatką.amp szmatką. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników, które mogą uszkodzić wykończenie.
- Kontrola kabla: Periodically inspect all cables for wear or damage. Ensure they are securely connected and not pinched.
- Dokręcenie śrub: Occasionally check and tighten any loose screws, especially after initial assembly and a few weeks of use.
- Smarowanie: The lifting columns are generally maintenance-free. Do not apply lubricants unless specifically instructed by the manufacturer.
Rozwiązywanie problemów
If you encounter issues with your desk frame, refer to the following common problems and solutions.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Biurko się nie porusza. | Power cable disconnected, control box error, overload. | Check power connection. Unplug and replug the power cord. Reduce load if exceeding 80 kg. Perform a reset (see below). |
| Uneven movement or noise. | Loose connections, uneven load, obstruction. | Check all screws and connections. Ensure weight is evenly distributed. Remove any obstructions. |
| Funkcja pamięci nie działa. | Memory not properly set, power interruption. | Re-program the memory positions. Perform a reset. |
| Wyświetlono kod błędu. | Konkretny błąd systemowy. | Refer to the specific error code in the full manual (if available) or contact customer support. Often, a reset can resolve temporary errors. |
Procedura resetowania
If the desk is not functioning correctly, a reset may resolve the issue.
- Odłącz przewód zasilający od gniazdka ściennego.
- Odczekaj co najmniej 30 sekund.
- Podłącz przewód zasilający z powrotem do gniazdka ściennego.
- Naciśnij i przytrzymaj ▼ (Down) button until the desk reaches its lowest position and slightly retracts, then stops. This indicates a successful reset.
Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | MARK ADLER |
| Numer modelu | Kseno 7.6 |
| Projekt biurka | Computer Desk (L-shaped frame) |
| Kolor | Czarny |
| Tworzywo | Metal (rama) |
| Zakres regulacji wysokości | 72 cm - 118 cm (28.3 cala - 46.5 cala) |
| Recommended Desktop Width | 120 cm - 150 cm (main section) |
| Głębokość | 58 cm (22.8 cala) |
| Maksymalna ładowność | 80 kg (176 funta) |
| Silniki | Podwójny system silnikowy |
| Pozycje pamięci | 3 programowalne pozycje |
| Cechy specjalne | Electric height adjustment, Ergonomic, Memory function, USB & USB-C ports, Headphone hook, Bag holder |
| Wymagany montaż | Tak (zalecane 2 osoby) |
| Kraj pochodzenia | Chiny |
Gwarancja
The MARK ADLER Xeno 7.6 Electric Dual Motor Desk Frame comes with a Ograniczona gwarancja. Please refer to the warranty card included with your product or contact MARK ADLER customer support for specific terms and conditions. This warranty typically covers manufacturing defects and malfunctions under normal use.
Wsparcie
For further assistance, technical support, or warranty claims, please contact MARK ADLER customer service.
- Wsparcie online: Visit the official MARK ADLER website for FAQs, additional resources, and contact forms.
- E-mail: Zapoznaj się z opakowaniem produktu lub oficjalnym webstrona zawierająca adres e-mail działu obsługi klienta.
- Telefon: Zapoznaj się z opakowaniem produktu lub oficjalnym webstrona z numerami telefonów pomocy technicznej.
When contacting support, please have your product model number (Xeno 7.6) and purchase information readily available.