Instrukcja obsługi toalety Los Flexi KBT21 o wysokości 21 cali

Wstęp

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new Los Flexi KBT21 21-Inch Tall Toilet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

Informacje dotyczące bezpieczeństwa

• Przed rozpoczęciem jakichkolwiek prac instalacyjnych lub konserwacyjnych należy zawsze zakręcić dopływ wody.
• Podczas montażu należy nosić odpowiedni sprzęt ochrony osobistej (PPE), taki jak rękawice i okulary ochronne.
• Aby zapobiec odpryskom i pęknięciom elementów ceramicznych, należy obchodzić się z nimi ostrożnie.
• Ensure all connections are tightened properly to prevent leaks, but do not overtighten.
• Jeśli masz jakiekolwiek wątpliwości, skonsultuj się z wykwalifikowanym hydraulikiem.

Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy w pakiecie znajdują się wszystkie wymienione poniżej elementy.

Opis obrazu: A visual breakdown of the Los Flexi KBT21 toilet package contents, including the toilet bowl, pre-assembled tank, soft-close seat, wax ring, bolt kit, and seat installation kit.

• 21" Two-Piece Toilet Bowl
• Zbiornik toaletowy wstępnie zmontowany
• Deska sedesowa z funkcją cichego opadania
• Zestaw pierścieni woskowych i śrub
• Zestaw do montażu deski sedesowej

Wymagane narzędzia i materiały (nie są dołączone)

The following tools and materials are necessary for installation but are not included in the package:

Opis obrazu: A visual guide to the tools and materials required for toilet installation, such as wrenches, screwdrivers, a hacksaw, level, and a water supply line.

• 10" (254mm) Adjustable Wrench
• 12" (305mm) Pipe Wrench
• Piła do metalu
• Śrubokręt
• Metal File (drobne cięcie)
• Taśma miernicza
• Obcinak do rur
• Poziom
• Szpachla
• Water Supply Line (if not reusing existing)

Konfiguracja i instalacja

Follow these steps carefully for a successful installation of your Los Flexi KBT21 toilet.

Part 1: Preparation Before Starting

1. Zakręć główny dopływ wody do łazienki.
2. Wyjmij starą toaletę (jeśli dotyczy) i dokładnie wyczyść obszar kołnierza.
3. Ensure the floor is clean and level where the new toilet will be installed.

Part 2: Install the Flange

1. Apply waterproof primer to the drain pipe and the flange.
2. Apply PVC cement to the drain pipe and the flange.
3. Insert the flange into the drain pipe.
4. Mark screw positions with a pencil and secure the flange with screws.
5. Measure and mark installation positions for T-bolts.
6. Insert T-bolts onto the flange and cover with metal washers.
7. Mark the position of T-bolts with tapes on both sides for alignment.

Part 3: Install the Toilet Bowl

1. Place the toilet bowl on a soft surface to prevent any damage.
2. Attach a wax ring to the toilet outlet.
3. Lift the bowl, align the two mounting holes with the flange bolts, and attach it to the flange.
4. Gently press to tightly connect the bowl to the flange.
5. Remove positioning tape on both sides.
6. Set a level on the toilet bowl to ensure it is level.
7. Place the plastic washer, metal washer, and nut onto the T-bolt, then tighten them.
8. If the T-bolt is too long, cut it to the appropriate length and cover with a cap.

Part 4: Install the Tank to the Bowl

1. Insert the cone washer and bolt through the tank hole.
2. Secure them with a washer and nut.
3. Screw the rubber gasket onto the flush valve nut.
4. Attach the toilet tank onto the bowl.
5. From the bottom, place the rubber washer, metal washer, and wing nut, then hand-tighten them.
6. Set a level on top of the tank to ensure it's level.
7. For the pre-assembled water tank, install the flush lever by inserting it through the tank hole, attaching a rubber fitting, and tightening by hand.
8. Attach the chain to the flush lever.
9. Finally, press the lever to confirm it flushes normally.

Part 5: Connect to the Water Supply

1. Connect the water supply line to the tank's fill valve nut. (Fits 7/8" water supply line).
2. If necessary, use the included 1/2" fill valve adapter for 1/2" water supply lines.
3. Connect to the water supply valve on the wall.
4. Tighten the water supply line with a wrench.
5. Turn on the water supply and let the tank fill with water.
6. Check if the tank gasket is leaking.
7. Confirm there is no leakage, then cover the tank lid.
8. Check for leaks with the water supply line and at the toilet-floor connection.
9. After ensuring no leaks, apply sealant where the toilet base meets the floor.

Part 6: Install the Toilet Seat

1. Insert the hinge bolt into the mounting hole and tighten with a power drill. Repeat for the other side.
2. Align the toilet seat with the hinge bolts.
3. Insert the seat and make final adjustments.
4. Fully tighten the bolts on both sides.
5. Remove the seat and cover the bolt caps first.
6. Then reinsert the seat to complete the toilet seat installation.

Działanie

Mechanizm płukania

The Los Flexi KBT21 toilet features an efficient 1.28 GPF siphonic flush system. To flush, simply press down on the chrome flush lever located on the side of the tank. The powerful 360° jet siphonic action ensures a clean bowl with minimal water usage.

Opis obrazu: A visual representation of the 360° jet siphonic powerful flushing system in action, demonstrating its efficiency and water-saving capabilities (1.28 GPF).

Siedzisko z funkcją cichego zamykania

The toilet is equipped with a soft-close seat and lid. This feature prevents slamming, reducing noise and potential damage. To close, simply push the seat or lid down gently, and it will lower slowly and quietly on its own.

Opis obrazu: The soft-close and high-quality seat feature, illustrating how the seat gently lowers without slamming, ensuring a quiet bathroom experience.

Konserwacja i pielęgnacja

Regular cleaning and maintenance will keep your Los Flexi KBT21 toilet in optimal condition.

Instrukcje czyszczenia

• Use a soft cloth and mild, non-abrasive cleaners for all surfaces.
• Avoid using harsh chemicals, abrasive pads, or cleaners containing bleach, as these can damage the ceramic glaze and seat material.
• For the soft-close seat, use the quick-release mechanism for easy removal and thorough cleaning.
• Clean the exterior of the toilet, including the base and tank, regularly.

Opis obrazu: Z bliska views highlighting the premium flush lever, elegant design, and smooth, high-gloss surface of the toilet, which facilitates easy cleaning and maintenance.

Rozwiązywanie problemów

Specyfikacje

Opis obrazu: A comprehensive diagram illustrating the dimensions of the Los Flexi KBT21 toilet from multiple angles, including height, depth, width, and rough-in measurements.

Opis obrazu: This image displays the various certifications for the Los Flexi KBT21 toilet, including ADA Compliant, WaterSense Certified, MaP Premium Certified, Uniform Plumbing Code Certified, and HET (High Efficiency Toilet), ensuring quality and compliance.

Gwarancja i wsparcie

Informacje o gwarancji

Your Los Flexi KBT21 toilet is backed by a 2-letnia gwarancja from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

Obsługa klienta

For any questions, assistance with installation, or warranty claims, please contact our dedicated customer support team. We are committed to ensuring your satisfaction and providing long-lasting comfort with every use.

Dane kontaktowe można znaleźć na naszej oficjalnej stronie webna stronie internetowej lub u sprzedawcy.