SCULPFUN S30 Ultra 22W Laser Engraver with Rotary Roller User Manual

1. Wprowadzenie

This manual provides essential information for the safe and efficient operation of your SCULPFUN S30 Ultra 22W Laser Engraver and its accompanying Rotary Roller. Please read these instructions carefully before use to ensure proper setup, operation, and maintenance.

2. Informacje dotyczące bezpieczeństwa

• Ochrona oczu: Always wear the provided laser protective eyewear when the laser is operating. The laser module is equipped with a removable protective cover for additional eye safety.
• Awaryjny postój: The machine features an emergency stop button. Press it immediately in case of any malfunction or unsafe condition.
• Blokada klawiszy: A key lock mechanism is included to prevent unauthorized use, especially by children. Ensure the key is removed when not in use.
• Wentylacja: Operate the laser engraver in a well-ventilated area to dissipate smoke and fumes generated during engraving or cutting.
• Bezpieczeństwo przeciwpożarowe: Trzymaj gaśnicę w pobliżu. Nie pozostawiaj maszyny bez nadzoru podczas pracy.
• Bezpieczeństwo materiałów: Only engrave or cut materials specified in this manual. Certain materials can produce toxic fumes or catch fire easily.

3. Zawartość opakowania

The SCULPFUN S30 Ultra 22W Laser Engraver with Rotary Roller package includes the following components:

• SCULPFUN S30 Ultra 22W Laser Engraving Machine (main unit)
• SCULPFUN Laser Rotary Roller
• Air Pump (mainboard controlled, 24V, 30L/min)
• Power Adapter (Input: 100-240V AC, 50/60Hz; Output: 24V 7A)
• Kabel USB
• Okulary ochronne przed laserem
• Tool Kit (including spare lenses, cleaning cloth, tweezers, focusing column, setting rings, wrenches)
• Metal Protective Pad (460x460mm splicing size)
• Solid Raising Feet (for elevating the machine for rotary engraving)
• Anti-slip rubber pads for raising feet
• Instrukcja obsługi (ten dokument)

4. Konfiguracja

4.1 Montaż maszyny

The SCULPFUN S30 Ultra 22W machine comes largely pre-assembled. Follow the quick start guide for final frame assembly and cable connections. Ensure all screws are tightened securely for stability and accuracy.

4.2 Podłączanie wałka obrotowego

The rotary roller is 100% pre-assembled for immediate use. To connect it to your laser engraver:

1. Disconnect the original Y-axis cable from the main machine.
2. Connect the provided rotary roller cable to the Y-axis motor port on the main machine.
3. Plug the other end of the rotary roller cable into the rotary roller unit.

The rotary roller's surface moving speed is precisely designed, eliminating the need for additional software settings. It is compatible with various GRBL motherboards.

Image: SCULPFUN Rotary Roller setup, showing the pre-assembled unit and connection points.

4.3 Installing Raising Feet (for Rotary Engraving)

When using the rotary roller for larger cylindrical objects, you may need to elevate the main engraver. Use the solid raising feet provided:

1. Attach the anti-slip rubber pads to the bottom of the raising feet.
2. Securely fix the raising feet to the corners of the engraver frame using the provided screws and nuts.

4.4 Air Assist Pump Connection

Connect the air assist pump to the designated port on the machine's control board. The S30 Ultra features a 32-bit air-assisted motherboard that intelligently controls the air assist, automatically turning it on for cutting and off for engraving when using compatible software like LightBurn (M8 air assist function).

4.5 Instalacja i podłączenie oprogramowania

The SCULPFUN S30 Ultra is compatible with popular laser engraving software such as LightBurn, LaserGRBL, Benbox, GrblController, and LiteFire. It supports Windows and MAC operating systems.

• Połączenie USB: Podłącz urządzenie do komputera za pomocą dostarczonego kabla USB.
• Połączenie bezprzewodowe Bluetooth: The machine supports Bluetooth connectivity. Ensure the Bluetooth antenna is attached and follow your software's instructions to establish a wireless connection.

5. Działanie

5.1 Basic Engraving and Cutting

The S30 Ultra 22W laser module features an ultrafine 0.08x0.08 mm compression spot, allowing for delicate and clear engraving. The machine has a standard engraving area of 600x600mm.

• Materiały wspierane:
      Rytownictwo: All types of wood (including high-density woods like walnut and cherry), MDF, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, 304 stainless steel, ceramic, dark stone.
      Cięcie: All types of wood (including high-density woods), MDF, acrylic, cardboard, non-woven fabric, bamboo sheets, leather, some plastic, PCB.
• Wydajność cięcia: The 22W laser can cut 15mm wood, 10mm acrylic, and 0.08mm steel in a single pass.
• Prędkość: Engraving speeds can reach up to 400mm/s.

5.2 Korzystanie z wałka obrotowego

The rotary roller expands the machine's capabilities to engrave cylindrical objects. It supports cylinder diameters from 5-150 mm and lengths from 0-230 mm. The adjustable axis distance allows for continuous sliding adjustment and is fixed with hand screws.

5.3 Ustawianie ostrości

The S30 Ultra uses a fixed focus column and sliding device for focusing. Refer to the quick start guide for detailed instructions on achieving optimal focus for different materials.

5.4 Using the Metal Protective Pad

The included 460x460mm metal protective pad is designed to protect your work surface during cutting operations and to facilitate smoke exhaust from the bottom.

6. Konserwacja

6.1 Laser Lens Cleaning and Replacement

The S30 Ultra 22W laser module features an interchangeable lens design, which helps maintain laser power and extends its lifespan. Regularly inspect the lens for dust or debris. Use the provided cleaning cloth and tools from the laser repair kit to clean or replace the lens as needed.

6.2 Air Nozzle Cleaning

The air assist nozzle can accumulate residue over time. Use the air nozzle brush from the tool kit to keep it clean and ensure optimal airflow.

6.3 Ogólne czyszczenie

Keep the machine's rails, belts, and other moving parts clean and free of dust and debris to ensure smooth and precise operation.

7. Rozwiązywanie Problemów

• Laser nie działa: Check power connections, ensure the key lock is in the ON position, and verify software settings.
• Słaba jakość grawerowania/cięcia: Verify laser focus, adjust power and speed settings in your software, and ensure the material is flat and properly secured. Clean the laser lens and air nozzle.
• Maszyna nie porusza się: Check all cable connections, especially the Y-axis and motor cables. Ensure the software is properly connected and sending commands.
• Rotary Roller Issues: Ensure the rotary roller cable is correctly connected, replacing the Y-axis cable. Check the belt tension on the rotary roller.

For further assistance, refer to the online user manual or contact SCULPFUN customer support.

8. Specyfikacje

9. Gwarancja i wsparcie

SCULPFUN products are designed for quality and reliability. For warranty information, technical support, or service inquiries, please refer to the official SCULPFUN webOdwiedź witrynę lub skontaktuj się ze sprzedawcą. Zachowaj paragon jako dowód zakupu.