ANPABO B0DFY2MWRQ

ANPABO 24V Ride on Shark Car Toy Instruction Manual

Model: B0DFY2MWRQ

Wstęp

This manual provides essential information for the safe assembly, operation, and maintenance of your ANPABO 24V Ride on Shark Car Toy. Please read all instructions carefully before use and retain this manual for future reference.

Ważne informacje dotyczące bezpieczeństwa

WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water. Always wear shoes, and never allow more than the recommended number of riders.

  • Przedział wiekowy: Odpowiedni dla dzieci w wieku od 3 lat.
  • Nośność: Maksymalna nośność wynosi 110 funtów.
  • Osadzenie: Designed for one child aged 3-12, or two children aged 3-6.
  • Bateria: Zasilany akumulatorem 24V 7AH.
  • Wymagany montaż dla osoby dorosłej: Podczas montażu małe części należy trzymać z dala od dzieci.
  • Ładowanie: Only use the provided charger. Do not overcharge.
  • Środowisko: Operate on flat, dry surfaces away from traffic and hazards.

Co jest w pudełku

Przed montażem należy upewnić się, że wszystkie elementy są obecne:

  • Karoseria
  • Remote control (requires 2 x 1.5 AAA batteries, not included)
  • Koła (4x)
  • Seats (2x)
  • Kierownica
  • Błotniki przednie i tylne
  • Axles and suspension components
  • Rumak
  • Sprzęt montażowy (śruby, podkładki, nakrętki)
  • Instrukcja obsługi

Konfiguracja i montaż

Follow these steps to assemble your ANPABO 24V Ride on Shark Car Toy. Refer to the installation video for visual guidance.

Kroki montażu:

  1. Rozpakowywanie: Carefully open the packaging and remove all components. Inspect for any damage.
  2. Podłącz akumulator: Locate the battery compartment, usually under the seat or hood. Connect the battery terminals as instructed. Ensure a secure connection.
  3. Install Axles and Suspension: Attach the front and rear axles to the car body. Secure the shock absorbers to the designated points.
  4. Dołącz koła: Slide each wheel onto its respective axle. Secure with washers and nuts. Attach the wheel covers.
  5. Montaż kierownicy: Connect the steering wheel's electrical connector to the steering column. Slide the steering wheel onto the column and secure it with the provided screw.
  6. Attach Fenders: Secure the front and rear fenders to the car body using the provided screws.
  7. Montaż miejsc: Place the seats into their designated positions and secure them with screws. Ensure seat belts are accessible and functional.
  8. Konfiguracja pilota zdalnego sterowania: Open the battery compartment on the remote control and insert 2 x 1.5 AAA batteries (not included).
ANPABO Shark Car Installation Video Thumbnail
Opis filmu: This video provides a detailed, step-by-step guide on how to assemble the ANPABO 24V Ride on Shark Car Toy. It covers unboxing, connecting the battery, installing axles, wheels, steering wheel, fenders, and seats, and setting up the remote control. The video is produced by the seller and is highly relevant for the setup process.

Opis filmu: Official ANPABO installation video demonstrating the complete assembly process for the 24V Ride on Shark Car. It shows each part being attached and secured, including electrical connections and final checks.

Instrukcja obsługi

Your ANPABO 24V Ride on Shark Car Toy offers both manual driving and parental remote control modes.

Tryb ręczny:

  1. Uruchom pojazd: Press the red power button on the dashboard.
  2. Wybierz prędkość: Use the High/Low speed switch to choose your desired driving speed. The vehicle can reach a maximum speed of 5.1 MPH.
  3. Kierunek: Use the forward/back joystick to select forward, park, or reverse.
  4. Przyśpieszyć: Press the foot pedal accelerator to move the vehicle.
  5. Sterowniczy: Użyj kierownicy, aby kontrolować kierunek.

Tryb zdalnego sterowania rodzicielskiego:

For younger children or additional safety, parents can control the vehicle using the remote control.

  1. Łączenie w pary: Follow the remote control's instructions to pair it with the vehicle.
  2. Sterownica: The remote allows control over forward/reverse movement, left/right steering, and speed selection.
  3. Ręczne: The remote control typically overrides manual controls for safety.

Główne cechy:

  • Moc napędu na cztery koła: Equipped with four 24V 200W motors for robust performance on various terrains.
  • EVA Tires: Durable, wear-resistant EVA rubber tires provide superior grip and stability on grass, rocky roads, and dirt tracks.
  • 4-Wheel Suspension: Minimizes bumps for a smooth and comfortable ride.
  • Łączność Bluetooth: Connect your device to the built-in music panel to play favorite songs and stories.
  • Ślepia: Features bright front lights for enhanced visibility and cool aesthetics.
  • Low Center of Gravity: Enhances stability and reduces rollover risk.
Two children riding the ANPABO Shark Car
Opis obrazu: Two young children are seated comfortably in the ANPABO 24V Ride on Shark Car, demonstrating its spacious two-seater design. The car is orange and black, with large, rugged wheels, and is being driven on a grassy area.
Child driving ANPABO Shark Car up a grassy hill
Opis obrazu: A child is driving the ANPABO 24V Ride on Shark Car up a grassy incline, highlighting its powerful motors and shock absorption system. The image emphasizes the vehicle's ability to handle varied terrain.
ANPABO Shark Car with battery and tire features
Opis obrazu: This image showcases the ANPABO 24V Ride on Shark Car's key power features: a 24V 7AH battery providing 1-2 hours of playtime, and durable EVA tires for all-terrain use. The car is depicted in orange and black.
ANPABO Shark Car manual and remote control modes
Opis obrazu: The image illustrates the dual control modes of the ANPABO 24V Ride on Shark Car: a child driving in manual mode using the foot pedal and steering wheel, and a parent using the remote control for parental assistance. Two children are shown enjoying the ride.
Child enjoying music in ANPABO Shark Car
Opis obrazu: A child is shown happily driving the ANPABO 24V Ride on Shark Car, with musical notes and a smartphone icon indicating the built-in music function and Bluetooth connectivity. Bright front lights are also visible.

Opis filmu: This video demonstrates a child riding the ANPABO 24V Shark Car, showcasing its two-seater capacity, 4x4 powerful engine, easy ascent capabilities on inclines, and smooth steering. It highlights the vehicle's performance on various outdoor terrains.

Opis filmu: This video features two children enjoying a ride in the ANPABO 24V 4WD Ride On UTV, emphasizing its spacious two-seater design and durable EVA tires suitable for various terrains. It shows the vehicle being driven on paved paths and grassy hills, demonstrating its powerful motor and ease of operation.

Opis filmu: This video highlights the ANPABO 2-Seater Ride on Shark Car's features, including its spacious design for two riders, powerful 800W motors, all-terrain EVA tires, and flexible steering. It demonstrates the vehicle's ability to navigate various surfaces and obstacles.

Konserwacja

Regular maintenance ensures the longevity and safe operation of your ride-on toy.

  • Pielęgnacja baterii: Charge the battery fully after each use. Do not allow the battery to completely drain. Store the vehicle with a fully charged battery if not used for extended periods.
  • Czyszczenie: Wytrzyj pojazd reklamąamp Ściereczka. Nie używaj silnych środków chemicznych ani ściernych środków czyszczących. Unikaj spryskiwania wodą bezpośrednio elementów elektrycznych.
  • Składowanie: Przechowuj pojazd w suchym i chłodnym miejscu, z dala od bezpośredniego światła słonecznego i wilgoci.
  • Kontrola: Periodically check all screws, nuts, and connections to ensure they are tight. Inspect tires for wear and tear.

Rozwiązywanie problemów

Jeśli napotkasz problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:

ProblemMożliwa przyczynaRozwiązanie
Pojazd nie porusza sięBattery is low or disconnected; loose wiring; blown fuse.Charge battery; check battery connections; inspect wiring; replace fuse if necessary.
Pojazd porusza się powoliLow battery charge; overloaded vehicle; operating on rough terrain.Fully charge battery; reduce load; operate on smoother surfaces.
Pilot nie działaRemote batteries are dead; remote not paired; interference.Replace remote batteries; re-pair remote control; move away from interference sources.
Nietypowe dźwięki podczas pracyLoose parts; debris in motor/wheels.Check and tighten all fasteners; remove any debris from moving parts.

Specyfikacje

  • Wymiary produktu: 48 x 35.4 x 24.4 cala
  • Waga przedmiotu: 62 funta
  • Zalecany wiek producenta: 3 lata i więcej
  • Bateria: 24V 7AH
  • Silniki: 4x 200W (Total 800W)
  • Maksymalna prędkość: 5.1 mil na godzinę
  • Opony: EVA Rubber
  • Zawieszenie: 4-Wheel Shock Absorbers
  • Liczba miejsc siedzących: Siedziba 2

Gwarancja i wsparcie

For warranty information, technical support, or replacement parts, please contact ANPABO customer service. Keep your purchase receipt as proof of purchase.

Informacje kontaktowe: Refer to the contact details provided on the product packaging or the official ANPABO webstrona.