MakerHawk USB C Power Meter Tester User Manual

1. Wprowadzenie

The MakerHawk USB C Power Meter Tester is a high-precision digital multimeter designed for comprehensive monitoring of USB Type-C power delivery. This device allows for real-time measurement of voltage, current, power, capacity, energy, timing, and temperature. It also records maximum voltage, current, and power values, providing detailed insights into your device's charging performance.

Key features include support for various fast charge protocols (PD2.0, PD3.0, QC2.0, QC3.0, etc.), two-way measurement capabilities, 8 distinct display modes with a 360° gravity-sensing rotation, offline data storage, battery capacity calculation, and an automatic screen-off function for power saving. Its wide compatibility makes it an essential tool for testing laptops, tablets, phones, power banks, and chargers.

MakerHawk USB C Power Meter Tester showing voltage, current, power, and energy readings on its display.

Figure 1: The MakerHawk USB C Power Meter Tester displaying real-time charging data.

Icons representing features like screen rotation, offline data storage, quick charge test, capacity detection, temperature measurement, two-way measurement, wide voltage range, high current, HD IPS screen, record peak parameters, high precision, and low power consumption.

Rysunek 2: Koniecview of the tester's main features and capabilities.

2. Konfiguracja i połączenie

Setting up your MakerHawk USB C Power Meter Tester is straightforward. Follow these steps to begin monitoring your devices:

Identyfikacja portów: The tester has a male USB-C connector on one end (input) and a female USB-C port on the other (output).
Podłącz źródło zasilania: Plug the male USB-C connector of the tester into your power source (e.g., wall charger, power bank, car charger).
Podłącz urządzenie: Plug your device's USB-C charging cable into the female USB-C port of the tester. Then, connect the other end of the cable to the device you wish to monitor (e.g., phone, tablet, laptop).
Sprawdź połączenie: Once connected, the tester's screen will illuminate, displaying real-time voltage, current, and other relevant charging parameters.

Diagram showing the USB C Power Meter Tester connected between various devices like tablets, laptops, mobile phones, car chargers, power banks, docking stations, data cables, and wall chargers.

Figure 3: The tester's compatibility with various Type-C devices and power sources.

The USB C Power Meter Tester connected between a wall charger and a smartphone, displaying real-time charging status with 50V output voltage, 12A output current, and 600W output power indicated.

Figure 4: Real-time monitoring of charging status for a smartphone.

3. Instrukcja obsługi

The MakerHawk USB C Power Meter Tester features a simple two-button interface for navigation and control. The screen automatically rotates 360° based on gravity for optimal viewing.

3.1 Funkcje przycisków

Short Press (Top Button): Switches interface upward or adjusts settings.
Long Press (Top Button): Enters or returns from a menu/setting.
Short Press (Bottom Button): Switches interface downward or adjusts settings.
Long Press (Bottom Button): Clears data or confirms selections.

3.2 Tryby wyświetlania

The tester offers 8 distinct display interfaces, which can be cycled through using short presses of the buttons. These modes provide various data visualizations, including:

Measurement Main Interface (Voltage, Current, Power, Energy, Max values)
Real-Time Curve Interface (Voltage and Current curves)
Battery Capacity Calculation Interface
Language Switching/No-Load Current Reset Interface
Countdown Screen Off Interface
Color Change Interface

The USB C Power Meter Tester connected to a laptop, showing its screen rotating 360 degrees automatically. Text labels indicate 'Short Press Switch interface upward/Adjust', 'Long Press Enter/Return', 'Short Press Switch interface downward/Adjust', and 'Long Press Clear/Confirm'.

Figure 5: Illustration of the 360° rotating screen display and button functions.

Multiple screenshots of the tester's display modes, including main measurement interface, real-time curve, battery capacity calculation, language selection, and screen off countdown. Descriptions for each mode are provided.

Rysunek 6: Examples of the various display interfaces available on the tester.

3.3 Pomiar dwukierunkowy

The tester supports two-way current measurement, meaning it can measure both forward and reverse current flow. This is particularly useful for understanding power delivery in complex setups or when a device might also be supplying power.

Two-way current measurement illustration showing the tester measuring current flow in both directions between a power strip and two smartphones.

Figure 7: The tester's capability for two-way current measurement.

4. Obliczanie pojemności akumulatora

One of the advanced features of this USB C Power Meter Tester is its ability to calculate the capacity of power banks and various types of batteries. This function helps you assess the performance and health of your battery-powered devices.

To use this feature, navigate to the Battery Capacity Calculation Interface. The display will show parameters such as:

Pre_V Ele/Cap: Pre-set voltage i pojemność.
Czas: Elapsed time of measurement.
Cal_Bat_Cap: Calculated battery capacity.
B_Vol: Pojemność bateriitagustawienie.
C_Eff: Conversion efficiency setting.
B_Cap: Actual battery capacity in mAh.

The USB C Power Meter Tester connected to a power bank, displaying the battery capacity calculation interface with parameters like current capacity, time, electric energy, battery voltage setting, conversion efficiency setting, and battery capacity.

Figure 8: Battery capacity calculation interface in use with a power bank.

5. Automatic Screen Off Function

The tester is equipped with an intelligent automatic screen-off feature to conserve power and extend its lifespan. The screen behavior is as follows:

No Current: If there is no current detected (e.g., charger not connected to a device, or device fully charged), the screen will automatically turn off after a short period.
PD Charger No Output: When connected to a PD charger that has no output, the display remains off.
Type-C In/Out with Protocol: The display lights up when Type-C input and output are connected and a charging protocol is active.
Phone No Input: If the phone has no input (e.g., not drawing power), the display remains off.

Four scenarios illustrating the automatic screen off function: display lights up when phone is connected, display remains off when PD charger has no output, display lights up when Type-C in and out are connected with protocol, and display remains off when phone has no input.

Rysunek 9: Examples of automatic screen off behavior under different conditions.

6. Specyfikacje produktu

Below are the detailed technical specifications for the MakerHawk USB C Power Meter Tester:

Parametr	Wartość
Tomtage Zakres	Prąd stały 4.5V-50V
Zakres prądu	0-6A (peak 12A)
Zakres mocy	0-600W
Energia elektryczna	0-9999 Wh
Pojemność	0-99999mAh
Pobór mocy	<0.15 W
Temperatura pracy	0-45°C / 32-113°F
Rozmiar produktu	43mm25mm10mm
Metoda kontroli	Double key control
Cechy specjalne	Dual parameter curve function, Gravity sensing screen rotation, Record peak parameters, CPU temperature measurement, Battery capacity calculation
Waga	10 gram
Kolor	Miedź

Table of product specifications including voltage, current, power, electric energy, capacity, power consumption, working temperature, product size, control method, and special features.

Figure 10: Detailed technical specifications of the USB C Power Meter Tester.

7. Rozwiązywanie Problemów

If you encounter issues with your MakerHawk USB C Power Meter Tester, please refer to the following common problems and solutions:

Problem: The screen does not light up when connected.
Rozwiązanie:
1. Ensure both the power source and the device are properly connected to the tester.
2. Sprawdź, czy źródło zasilania jest aktywne i dostarcza prąd.
3. Check if the connected device is drawing current. The screen may remain off if no current is detected (refer to Automatic Screen Off function).
4. Try a different USB-C cable or power source to rule out external issues.
Problem: Readings appear inaccurate or fluctuate wildly.
Rozwiązanie:
1. Sprawdź, czy wszystkie połączenia są solidne i wolne od zanieczyszczeń.
2. Avoid using excessively long or low-quality USB-C cables, which can introduce resistance and affect readings.
3. Test with a known good power source and device to isolate the problem.
4. The tester has high precision; minor fluctuations might be normal depending on the power delivery negotiation.
Problem: Cannot switch display modes or clear data.
Rozwiązanie:
1. Ensure you are using short presses for mode switching and long presses for entering/clearing.
2. Refer to the "Operating Instructions" section for correct button usage.
3. If the screen is locked, press the confirmation button 5 times to unlock it.
Problem: Battery capacity calculation seems incorrect.
Rozwiązanie:
1. Upewnij się, że pojemność bateriitage and conversion efficiency settings are correctly configured in the Battery Capacity Calculation Interface.
2. Perform a full charge/discharge cycle on the battery being tested for more accurate results.
3. Note that calculated capacity can vary based on discharge rate and temperature.

8. Konserwacja

To ensure the longevity and optimal performance of your MakerHawk USB C Power Meter Tester, please follow these maintenance guidelines:

Czyszczenie: Use a soft, dry cloth to clean the device. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen or casing.
Składowanie: Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Keep it protected from dust and moisture when not in use.
Obsługiwanie: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal components or the screen.
Łączność: Ensure USB-C ports are free of dust and debris before connecting cables. Gently insert and remove cables to prevent damage to the ports.

9. Gwarancja i wsparcie

MakerHawk products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official MakerHawk website. If you require technical assistance or have questions regarding your USB C Power Meter Tester, please contact MakerHawk customer support through their official channels.

Często można znaleźć zasoby pomocy technicznej, odpowiedzi na często zadawane pytania i informacje kontaktowe na stronie MakerHawk Amazon Store.

MakerHawk B0D95QZ9T4