sweeek IBEDAVA90BG
sweeek Avalon Storage Bed with Slatted Base and Headboard
Model: IBEDAVA90BG (90x190 cm)
Ważne informacje dotyczące bezpieczeństwa
Przed montażem i użyciem należy uważnie przeczytać wszystkie instrukcje. Zachowaj tę instrukcję do wykorzystania w przyszłości.
- Przed rozpoczęciem montażu należy upewnić się, że wszystkie części są obecne i nieuszkodzone.
- Złóż łóżko na miękkiej i czystej powierzchni, aby zapobiec zarysowaniom.
- Nie dokręcaj śrub zbyt mocno podczas montażu.
- Podczas montażu małe części należy trzymać z dala od dzieci.
- Regularnie sprawdzaj wszystkie elementy mocujące, aby mieć pewność, że są dobrze dokręcone.
- Nie stawaj i nie skacz na łóżku.
- Distribute weight evenly when using the storage compartment.
Zawartość opakowania
Sprawdź, czy w pakiecie znajdują się wszystkie komponenty:
- Bed frame components (side rails, footboard)
- Zagłówek
- Slatted base with lifting mechanism
- Storage compartment base panels
- Pakiet osprzętu (śruby, nakrętki, podkładki, klucz imbusowy)
- Instrukcja montażu
Uwaga: Materac nie jest wliczony w cenę.
Instrukcja montażu
Tools required: Phillips head screwdriver (not included), Allen key (included).
- Rozpakuj i zidentyfikuj części: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Compare each part to the parts list in the included assembly diagram to ensure everything is present.
- Złóż ramę łóżka: Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until the frame is complete.
- Install the Storage Base: Place the base panels for the storage compartment into the designated slots within the bed frame. These panels form the bottom of the storage area.
- Attach the Slatted Base and Lifting Mechanism: Secure the slatted base frame to the bed frame using the provided hardware. Attach the gas lift mechanism according to the detailed diagram in your separate assembly guide. Ensure the mechanism operates smoothly before proceeding.
- Ostateczne dokręcanie: Gdy wszystkie elementy będą już na swoim miejscu i wyrównane, dokręć wszystkie śruby i nakrętki. Nie dokręcaj ich zbyt mocno.

Operating the Storage Bed
The sweeek Avalon storage bed features a convenient gas lift mechanism for easy access to the under-bed storage compartment.
- Aby otworzyć: Remove the mattress from the bed. Grasp the fabric handle located at the foot end of the slatted base. Gently lift the base upwards. The gas lift mechanism will assist in raising and holding the base in the open position.
- Zamknąć: Grasp the fabric handle and gently pull the slatted base downwards. Apply slight pressure to overcome the gas lift resistance until the base fully lowers and rests securely on the bed frame.
- Środki ostrożności: Always remove the mattress before opening the storage compartment. Do not place hands or objects in the mechanism while opening or closing. Ensure the base is fully closed before placing the mattress back on the bed.

Pielęgnacja i konserwacja
- Pielęgnacja tkanin: For general cleaning, gently vacuum the fabric upholstery with a soft brush attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
- Pielęgnacja ramy: Wytrzyj ramę łóżka miękką szmatką.amp szmatką. Unikaj stosowania silnych środków chemicznych lub ściernych środków czyszczących, ponieważ mogą one uszkodzić wykończenie.
- Regularne kontrole: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent squeaking.
- Wentylacja: The slatted base provides optimal ventilation for your mattress. Ensure the storage compartment is not overfilled to allow for air circulation.
Rozwiązywanie problemów
| Problem | Rozwiązanie |
|---|---|
| Bed is wobbly or squeaks. | Check all bolts and screws. Tighten any loose fasteners. Ensure the bed is on a level surface. |
| Slatted base does not lift or close smoothly. | Ensure the mattress has been removed before lifting. Check for any obstructions in the mechanism. Verify that the gas lift mechanism was installed correctly according to the assembly guide. |
| Brakujące części lub uszkodzone podzespoły. | Do not proceed with assembly. Contact sweeek customer support immediately for assistance. |
Specyfikacje

| Funkcja | Szczegół |
|---|---|
| Numer modelu | IBEDAVA90BG |
| Marka | słodki |
| Wymiary całkowite (dł. x szer. x wys.) | Wymiary: 202 cm x 97.5 cm x 86 cm |
| Zgodność rozmiaru materaca | 90 x 190 cm (bez materaca) |
| Kolor | Beżowy |
| Styl | Współczesny |
| Waga | 32 kilograma |
| Wymagany montaż | Tak |
| Przybory | Eucalyptus wood, composite panels, polyester fabric upholstery |
| Zawarte komponenty | Slatted base, headboard, storage mechanism |
Gwarancja i wsparcie
For information regarding warranty coverage or to obtain customer support, please refer to the documentation provided with your purchase or visit the official sweeek website. If you encounter any issues not covered in this manual, please contact sweeek customer service for assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.