Massive Audio GTR84

Massive Audio GTR84-8" Subwoofer Instruction Manual

Model: GTR84 | Brand: Massive Audio

1. Wprowadzenie

This manual provides detailed instructions for the installation, operation, and maintenance of your Massive Audio GTR84-8" Dual 4 Ohm Subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product. The GTR84 is an 8-inch subwoofer designed for powerful bass reproduction, featuring a heavy-gauge steel basket, dual stacked high-flux Y30 Strontium Ferrite magnets, and a 2-inch high-temperature voice coil.

Massive Audio GTR84-8 inch Subwoofer with grill, angled view

Figure 1: Massive Audio GTR84-8" Subwoofer

The GTR84 subwoofer is engineered with a custom high-roll foam surround and a textured non-pressed pulp cone infused with resin, contributing to enhanced excursion and responsiveness. It is equipped with high-grade woven round tinsel leads and a precision spider suspension system for accurate cone movement and efficient signal transfer.

2. Główne cechy

  • Rugged Steel Basket & Premium Finish: Heavy-gauge steel basket with industrial-grade textured paint for durability and minimal resonance.
  • High Flux Magnet & USA-Made Voice Coil: Powered by dual stacked high-flux Y30 80oz Strontium Ferrite magnets and a 2" high-temp voice coil (Made in USA) for deep, controlled bass and thermal stability.
  • Custom Surround & Cone: Features a custom high-roll foam surround with the MASSIVE logo and a textured non-pressed pulp cone infused with resin for enhanced excursion and responsiveness.
  • Precision Suspension & Signal Flow: High-grade woven round tinsel leads and a precision spider suspension system ensure accurate cone movement and efficient signal transfer.
  • Optimized Specs for Performance: X-Max of 12.5mm, FS of 39.5Hz, and a terminal case using flexible pure copper wire. Dual impedance options offer versatile wiring for custom installations.

3. Konfiguracja i instalacja

3.1 Zalecenia dotyczące obudów

The GTR84 subwoofer performs optimally in properly designed enclosures. For best results, consider the following recommendations:

  • Skrzynia portowana: Approximately 0.96 cubic feet (9.6"H x 15"D x 10.8"W) tuned to 39.9Hz.
  • Zapieczętowane pudełko: Approximately 0.5 cubic feet.

3.2 Wiring Configurations (Dual 4 Ohm)

The GTR84 features dual 4 Ohm voice coils, offering flexibility in wiring to match your ampwymagania dotyczące impedancji liifiera. Zawsze upewnij się, że amplifier jest stabilny przy wybranej impedancji.

Massive Audio GTR84-8 inch Subwoofer showing wiring terminals

Figure 2: Subwoofer terminals with flexible pure copper wire.

3.2.1 Series Wiring (8 Ohm Total)

Connect the positive terminal of Voice Coil 1 to the negative terminal of Voice Coil 2. Then, connect the amplifier's positive output to the positive terminal of Voice Coil 2, and the amplifier's negative output to the negative terminal of Voice Coil 1. This configuration results in an 8 Ohm load.

3.2.2 Parallel Wiring (2 Ohm Total)

Connect the positive terminals of both voice coils together. Connect the negative terminals of both voice coils together. Then, connect the amplifier's positive output to the combined positive terminals, and the ampujemny sygnał wyjściowy filtru do połączonych zacisków ujemnych. Taka konfiguracja skutkuje obciążeniem 2 omów.

3.3 Montaż

Ensure the mounting surface is rigid and free from obstructions. Use appropriate mounting hardware to secure the subwoofer firmly within the enclosure. Refer to the dimension diagram for precise cutout and mounting hole measurements.

Massive Audio GTR84-8 inch Subwoofer dimension diagram

Figure 3: GTR84 Subwoofer dimensions (all measurements in mm).

4. Instrukcja obsługi

4.1 Initial Power-Up and Break-in

After installation, gradually increase the volume during the first few hours of use. This 'break-in' period allows the subwoofer's suspension components to loosen and settle, leading to optimal performance. Avoid playing at maximum volume during this initial phase.

4.2 AmpUstawienia lifier

Prawidłowe ustawienie amplifier's gain and crossover frequencies is crucial for sound quality and subwoofer longevity.

  • Ustawienie wzmocnienia: Ustaw amplifier gain to match the output voltage of your head unit. Avoid setting the gain too high, as this can lead to distortion and potential damage.
  • Filtr dolnoprzepustowy (LPF): Ustaw LPF na swoim amplifier to filter out frequencies above the subwoofer's intended range, typically between 80Hz and 120Hz.
  • Filtr poddźwiękowy: If available, set a subsonic filter to protect the subwoofer from playing frequencies below its resonant frequency (Fs), which is 39.9Hz for the GTR84. A setting around 30Hz is often appropriate.

5. Konserwacja

To ensure the longevity and performance of your GTR84 subwoofer, follow these maintenance guidelines:

  • Czyszczenie: Use a soft, dry cloth to gently wipe down the subwoofer cone and surround. Avoid using harsh chemicals or excessive moisture.
  • Kontrola: Periodically inspect the subwoofer for any signs of damage, such as tears in the surround or cone, loose connections, or unusual wear.
  • Warunki środowiskowe: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture. Ensure adequate ventilation around the enclosure to prevent overheating.
Massive Audio GTR84-8 inch Subwoofer with protective grill

Figure 4: GTR84 Subwoofer with integrated protective grill.

6. Rozwiązywanie Problemów

If you experience issues with your GTR84 subwoofer, refer to the following common troubleshooting steps:

  • Brak dźwięku:
    • Check all wiring connections (power, ground, remote, signal, speaker).
    • Zweryfikuj amplifier jest włączony i nie znajduje się w trybie ochrony.
    • Sprawdź, czy jednostka główna wysyła sygnał audio.
  • Zniekształcony dźwięk:
    • Zmniejszyć amplifier gain setting.
    • Sprawdź prawidłowe ustawienia zwrotnicy.
    • Sprawdź, czy stożek i obudowa subwoofera nie są uszkodzone fizycznie.
  • Przegrzanie:
    • Zapewnij odpowiednią wentylację wokół ampwzmacniacz i subwoofer.
    • Zweryfikuj amplifier's impedance matches the subwoofer's wiring configuration.
    • Reduce prolonged high-volume playback.

7. Specyfikacje

FunkcjaSpecyfikacja
Numer modeluGTR84
Rozmiar głośnika8 cali
Zakres mocy RMS300W-600W (500W RMS Ideal)
Moc szczytowa800 W
Cewka1.5" Dual 4 Ohm, Hi-Temp (Made in USA)
MagnesDual Stacked High Flux Y30 120oz Strontium Ferrite
KoszykHeavy Gauge Steel with Industrial Texture Painting
StożekTextured Non-Pressed Pulp with Resin
OtaczaćCustom High Roll Foam with MASSIVE Logo
X-Maks12.5mm
SPL82.5dB
FS (Resonant Frequency)39.9 Hz
Zalecana objętość skrzynki portowej0.96 ft³ (9.6"H x 15"D x 10.8"W)
Zalecana objętość zamkniętego pudełka0.5 stóp³
Waga przedmiotu15 funtów
Wymiary przedmiotu (gł. x szer. x wys.)11" gł. x 11" szer. x 11" wys.

8. Koniec produktuview Wideo

Film 1: Oficjalny produktview of the Massive Audio GTR84 subwoofer, highlighting its features and specifications.

9. Informacje o gwarancji

The Massive Audio GTR84 subwoofer comes with a Ograniczona gwarancja. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official Massive Audio webZachowaj dowód zakupu na wypadek roszczeń gwarancyjnych.

10. Wsparcie

For technical assistance, installation questions, or warranty inquiries, please contact Massive Audio customer support directly. You can find contact information on the official Massive Audio webna stronie internetowej lub w dokumentacji dołączonej do produktu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.