CYSSJF B-K-TP Thermal Ticket Dispenser User Manual

1. Wprowadzenie

This manual provides detailed instructions for the setup, operation, and maintenance of your CYSSJF B-K-TP Thermal Ticket Dispenser. This device is designed to streamline queue management in various commercial settings by providing sequential number tickets without the need for ink.

2. Koniec produktuview

2.1 Główne cechy

• Druk termiczny bez użycia atramentu: Utilizes thermal paper, eliminating the need for ink cartridges.
• Sequential Numbering: Automatically prints tickets with sequential numbers (1 to 4 digits).
• Treść, którą można dostosować: Printed content can be edited via dedicated computer software (Windows version).
• Flexible Numbering: Ability to reset ticket numbers, set a custom start number, and print multiple identical tickets (with software configuration).
• Kompaktowy i przenośny: Lightweight design for easy placement.
• Podłącz i graj: Simple setup for immediate use.

2.2 Zawartość pudełka

• 1 x CYSSJF B-K-TP Thermal Ticket Dispenser
• 1 x Roll of Thermal Paper (57mm width x 10m length)
• 1 x kabel USB
• 1 x ładowarka sieciowa
• 1 x Instrukcja obsługi

2.3 Wymiary produktu

The ticket dispenser measures approximately 15 cm (Length) x 10 cm (Width) x 8 cm (Height).

3. Konfiguracja

3.1 Rozpakowanie

Carefully remove all components from the packaging. Inspect the dispenser for any signs of damage. Retain packaging for future transport or storage.

3.2 Podłączanie zasilania i USB

Locate the power jack and USB jack on the rear of the dispenser.

Obraz: Tył view of the dispenser, highlighting the power jack and USB port for connectivity.

1. Connect the power charger to the power jack and plug it into a suitable electrical outlet.
2. If you intend to edit printed content, connect the USB cable from the dispenser's USB jack to your computer.

3.3 Ładowanie papieru termicznego

Correct paper loading is essential for proper operation and to prevent blank prints.

Image: Illustration demonstrating the correct orientation for inserting the thermal paper roll, ensuring the printable side faces the print head.

1. Otwórz pokrywę komory papieru.
2. Insert the thermal paper roll, ensuring the paper feeds from the bottom of the roll and the thermal (printable) side is facing upwards towards the print head. Refer to the diagram for correct orientation.
3. Wyciągnij niewielki skrawek papieru poza krawędź tnącą.
4. Zamknij dokładnie pokrywę komory papieru.

3.4 Pierwsze włączenie zasilania

Once power is connected, the dispenser is ready for use. There is typically no separate power button; it powers on automatically when plugged in.

4. Instrukcja obsługi

4.1 Basic Ticket Printing

To print a sequential ticket, simply press the designated print button on the dispenser. Each press will print the next number in the sequence.

Image: The ticket dispenser in use, illustrating the simple action of pressing the button to issue a numbered ticket.

4.2 Numbering Options

• Digit Count: The dispenser can print 1, 2, 3, or 4-digit numbers (e.g., 0-9, 00-99, 000-999, 0000-9999). The default setting is typically 3 digits.
• Resetting Ticket Number: The ticket number can be reset to the start number (default 001) at any time.
• Daily Auto-Reset: By default, the ticket dispenser number will automatically reset to 001 at the beginning of each day. This function can be turned off via the editing software.
• Setting Start Number: You can configure a custom start number for the sequence using the editing software.

4.3 Printing Multiple Identical Tickets

By default, the dispenser prints one ticket at a time. To print two or more tickets with the same number consecutively, this setting must be configured within the dedicated editing software.

4.4 Editing Printed Content

The content printed on the tickets can be customized using a dedicated computer software (Windows version). This allows you to add your store's name, logo, QR code, contact information, or other relevant details.

1. Connect the dispenser to your computer via the USB cable.
2. Install and launch the editing software (contact support if you need the software).
3. Use the software interface to design and customize your ticket content.
4. Upload the new settings to the dispenser.

5. Konserwacja

5.1 Wymiana papieru termicznego

When the paper roll is depleted, replace it with a new thermal paper roll. Compatible paper rolls are 57mm wide. While 58mm wide paper can be used, ensure the roll diameter is appropriate (e.g., 40mm diameter) as larger diameters may not fit.

5.2 Czyszczenie

To maintain optimal performance, periodically clean the exterior of the dispenser with a soft, dry cloth. Avoid using abrasive cleaners or solvents. For the print head, gently wipe with a lint-free cloth moistened with isopropyl alcohol, ensuring the device is powered off and disconnected from power.

6. Rozwiązywanie Problemów

6.1 Blank Content Printed

If the dispenser prints blank tickets, the thermal paper roll may be loaded incorrectly. Refer to Section 3.3 "Loading Thermal Paper" and ensure the thermal (printable) side of the paper is facing the print head.

6.2 Problemy z oprogramowaniem

If you encounter difficulties with the editing software or content customization, please contact customer support for assistance.

7. Specyfikacje

8. Wsparcie

For technical assistance, inquiries about the editing software, or any other support needs, please contact your retailer or the manufacturer directly. Contact information is typically provided with your purchase documentation or on the product packaging.