Prexiso PLAG90T

PREXISO PLAG90T 3-in-1 Multi Surface Laser Level Instruction Manual

Model: PLAG90T

Produkt ponadview

The PREXISO PLAG90T is a versatile 3-in-1 tool combining a digital level, angle meter, and laser line projector. It is designed for various tasks requiring precise leveling and angle measurement, including home renovation, picture hanging, woodworking, and construction. This device features a clear digital display, multiple measurement modes, and a magnetic base for convenient use.

PREXISO PLAG90T 3-in-1 Laser Level displaying horizontal laser line and digital angle on a shelf

Figure 1: The PREXISO PLAG90T displaying a horizontal laser line for leveling a shelf.

Organizować coś

Ładowanie urządzenia

The PREXISO PLAG90T is equipped with a rechargeable Li-ion battery. To charge, locate the USB-C port on the device and connect it to a power source using the provided USB-C cable. Ensure the device is fully charged before first use for optimal performance.

PREXISO PLAG90T device showing USB-C charging port and connected cable

Figure 2: USB-C charging port on the PREXISO PLAG90T.

Attaching the Wall Mount Base

The device includes a wall mount base for hands-free operation. There are three methods to fix the wall mount base:

  1. Using 2 Pins: For rough surfaces, insert the two provided pins into the designated holes on the wall mount base and gently push them into the wall.
  2. Using Self-Adhesive Strips: For smooth surfaces, attach the provided self-adhesive strips to the back of the wall mount base and press firmly onto the desired surface.
  3. Using Pin Holes: For any surface where a more secure attachment is needed, use screws through the pin holes on top of the wall mount base.
PREXISO PLAG90T wall mount base showing three fixing methods: self-adhesive strips, 2 pins, and keyhole opening

Figure 3: Different methods for attaching the wall mount base to various surfaces.

Instrukcja obsługi

Włączanie/wyłączanie zasilania

Naciśnij i przytrzymaj MOC/ZERO przycisk włączający lub wyłączający urządzenie.

Tryby pomiaru

The device supports two primary measurement modes:

  • ABSOLUTE Measurement Mode: The device enters this mode directly upon power-on, displaying the absolute angle relative to a true horizontal plane.
  • RELATIVE Measurement Mode: Naciśnij ZERO button to switch to relative measurement. The display will show 'S' blinking. Keep the equipment still for 3 seconds until 'S' stops flashing to set the current angle as the new zero reference. Press the ZERO button again to return to absolute measurement.
PREXISO PLAG90T displaying absolute angle measurement

Figure 4: Absolute angle measurement mode.

PREXISO PLAG90T displaying relative angle measurement

Figure 5: Relative angle measurement mode.

Wybór jednostki

Naciśnij TRYB button to cycle through the available units: degrees (°), percentage (%), millimeters per meter (mm/m), and inches per foot (IN/FT).

Tryby linii laserowej

The device can project three types of laser lines:

  • Linia pozioma: Naciśnij LASER naciśnij przycisk raz.
  • Linia pionowa: Naciśnij LASER naciśnij przycisk po raz drugi.
  • Cross-Line (Horizontal and Vertical): Naciśnij LASER przycisk po raz trzeci.

Naciśnij LASER button a fourth time to turn off the laser lines. The laser is a Class II product with a maximum output of < 1 mW.

PREXISO PLAG90T 3-in-1 Laser Level displaying horizontal, vertical, and cross-line laser modes

Figure 6: Various laser line modes for different applications.

Słyszalny brzęczyk

The device features an audible buzzer that alerts when the angle is within ±1° of the horizontal or vertical position. This is useful for quick leveling without constantly viewing the display. Long press the HOLD/AUDIO button to activate or deactivate the buzzer.

Funkcja zatrzymania danych

Aby zamrozić aktualny pomiar na wyświetlaczu, naciśnij krótko przycisk HOLD/AUDIO button. The 'H' icon will appear. Press the button again to return to live measurement.

Konserwacja

Kalibrowanie

The equipment is factory-calibrated. To ensure lasting accuracy, the device also has a user calibration function. Perform calibration on a flat and smooth surface with a tilt no more than 5°. If the tilt exceeds 5°, the display will show 'ERR'.

Aby dokonać ponownej kalibracji:

  1. In shutdown status, press and hold the TRYB przycisk, a następnie naciśnij MOC/ZERO button until the LCD displays 'CAL 1'.
  2. Keep the equipment still for a period of time, then press the TRYB button. 'CAL 1' flashes several times, then the display reads 'CAL 2'.
  3. In the same location, rotate the equipment 180°. 'CAL 2' flashes several times. After 'CAL 2' disappears, the calibration is completed and the LCD will show the current angle in high-accuracy display.
Diagram showing the steps for calibrating the PREXISO PLAG90T laser level

Figure 7: Calibration procedure for the PREXISO PLAG90T.

Rozwiązywanie problemów

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.