FIDECO Magnetic M.2 2230 NVMe SSD Enclosure User Manual

1. Wprowadzenie

This manual provides detailed instructions for the FIDECO Magnetic M.2 2230 NVMe SSD Enclosure. This device allows you to expand storage and transfer data at high speeds between various compatible devices, including iPhone 15 series and above, MacBooks, iPad Pros, and Android devices. Its magnetic design ensures secure attachment to MagSafe-compatible phones.

The enclosure supports M.2 NVMe SSDs of size 2230 (M-Key or M+B Key) and utilizes USB 3.2 Gen 2 for data transfer speeds up to 10Gbps. It is designed for plug-and-play operation across Windows, Mac OS, and Linux operating systems.

Image 1.1: FIDECO Magnetic M.2 2230 NVMe SSD Enclosure.

2. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• 1x FIDECO NVMe SSD Enclosure
• 1x kabel USB-C do USB-C
• 1x Silicone Thermal Pad
• 1x Screwdriver with Screws
• 1x Instrukcja obsługi

Image 2.1: Package contents including the enclosure, cable, thermal pad, screwdriver, and manual.

3. Specyfikacje

Image 3.1: The enclosure supports M.2 NVMe 2230 SSDs (M-Key or M+B Key) only.

4. Konfiguracja

4.1. Installing the M.2 SSD

Follow these steps to install your M.2 2230 NVMe SSD into the enclosure:

1. Odkręć tylną pokrywę: Use the provided screwdriver to loosen the screws on the back cover and carefully remove the metal lid.
2. Włóż dysk SSD M.2: Gently insert your M.2 2230 NVMe SSD into the slot. Ensure it is fully seated. Secure the SSD with the small screw provided.
3. Apply the thermal pad: Peel off the protective film from both sides of the silicone thermal pad. Place the thermal pad directly onto the SSD chip. This helps with heat dissipation.
4. Close the enclosure: Place the back cover back onto the enclosure and tighten the screws securely.

Image 4.1: Visual guide for SSD installation.

4.2. Konfiguracja początkowa i formatowanie

After installing the SSD, it may need to be formatted before use, especially if it's new. The recommended file system for broad compatibility with iPhone, Mac, and PC is exFAT.

Dla komputerów Mac:

1. Connect the SSD in its enclosure to your Mac.
2. Otwarte Narzędzie dyskowe (found in Applications > Utilities).
3. Select the newly connected SSD from the sidebar.
4. Trzask Usuwać in the top bar.
5. In the pop-up window, set the Format to byłyFAT and the Scheme to GUID Partition Map.
6. Trzask Usuwać to confirm. This will format the SSD.

Dla komputera z systemem Windows:

1. Connect the SSD in its enclosure to your PC.
2. Otwarte File Odkrywca (Windows Key + E).
3. Locate the newly connected SSD (it might appear as an unformatted drive).
4. Right-click on the drive and select Format....
5. Pod File system, select byłyFAT.
6. Zapewnić Szybki format jest zaznaczone i kliknij Start.

5. Instrukcja obsługi

5.1. Łączenie się z urządzeniami

The FIDECO SSD enclosure is plug-and-play. Simply connect it to your device using the provided USB-C to USB-C cable. No additional drivers or software are required.

• iPhone 15 Series and Above: Connect directly to the iPhone's USB-C port.
• MacBook/iPad Pro: Connect directly to the USB-C port.
• Urządzenia z systemem Android: Connect directly to the USB-C port.
• PCs/Laptops/Gaming Consoles: Connect to an available USB-C port.

Image 5.1: The enclosure offers versatile connectivity with multiple devices.

5.2. Magnetic Attachment (for MagSafe-compatible phones)

The enclosure features built-in magnets for secure attachment to iPhone 15 series and newer models with MagSafe functionality. This allows for convenient, hands-free use, reducing the risk of accidental drops or disconnections during use, such as when recording video.

Notatka: This magnetic feature is only compatible with mobile phones that have magnetic suction functionality (MagSafe or equivalent).

Image 5.2: Magnetic attachment to an iPhone for simultaneous recording and storage.

5.3. Przesyłanie danych

The enclosure supports USB 3.2 Gen 2, providing data transfer speeds up to 10Gbps. This enables rapid transfer of large files, photos, and videos. It also supports UASP, TRIM, and S.M.A.R.T for optimized performance and drive health monitoring.

For optimal speeds, ensure your host device also supports USB 3.2 Gen 2. Older USB standards will result in lower transfer rates.

Rysunek 5.3: Możliwość przesyłu danych z dużą prędkością.

6. Konserwacja

To ensure the longevity and optimal performance of your FIDECO SSD enclosure:

• Czyszczenie: Do czyszczenia zewnętrznej części obudowy należy używać miękkiej, suchej ściereczki. Unikać stosowania płynnych środków czyszczących i rozpuszczalników.
• Rozpraszanie ciepła: Aluminium casing and included thermal pad are designed for efficient heat dissipation. Ensure the enclosure is not covered or placed in an area with poor airflow during extended use to prevent overheating.
• Składowanie: Gdy obudowa nie jest używana, należy ją przechowywać w chłodnym i suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
• Obsługiwanie: Handle the enclosure with care to avoid physical damage. While the magnetic attachment is secure, avoid unnecessary force or impacts.

7. Rozwiązywanie Problemów

• Dysk SSD nie został rozpoznany:
  • Sprawdź, czy dysk SSD jest prawidłowo zainstalowany i zabezpieczony w obudowie.
  • Verify the SSD is an M.2 NVMe 2230 (M-Key or M+B Key). SATA SSDs are not compatible.
  • Check the cable connection to both the enclosure and your device. Try a different USB-C port or cable if available.
  • If it's a new SSD, ensure it has been formatted (refer to Section 4.2).
  • Test the enclosure with a different SSD or on another compatible device to isolate the issue.
• Niska prędkość transferu danych:
  • Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps). Older USB standards will limit speed.
  • Verify the cable used is rated for USB 3.2 Gen 2 speeds.
  • Close any unnecessary applications on your device that might be consuming system resources.
  • Ensure the SSD itself is performing optimally.
• Magnetic Attachment Not Strong Enough:
  • Confirm your phone has MagSafe or equivalent magnetic functionality.
  • If using a phone case, ensure it is MagSafe compatible or thin enough not to interfere with the magnetic connection.
  • Clean the magnetic surfaces on both the enclosure and your phone/case to ensure no debris is weakening the connection.

8. Gwarancja

The FIDECO Magnetic M.2 2230 NVMe SSD Enclosure comes with a one-year limited warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Proszę zachować dowód zakupu na potrzeby roszczeń gwarancyjnych.

9. Wsparcie

For technical support, warranty claims, or further assistance, please contact FIDECO customer service through the retailer where you purchased the product or visit the official FIDECO webwitryna do informacji kontaktowych.

When contacting support, please provide your product model number (API15) and a detailed description of the issue.