Wstęp
This manual provides detailed instructions for the assembly, operation, and maintenance of your vidaXL Bed Frame, Model 842009. Please read all instructions carefully before beginning assembly and retain this manual for future reference. This bed frame is designed to accommodate a mattress of 160 x 200 cm.
Informacje dotyczące bezpieczeństwa
- Przed montażem upewnij się, że wszystkie elementy są kompletne i nieuszkodzone. Nie używaj, jeśli brakuje którejkolwiek części lub jest ona uszkodzona.
- Złóż ramę łóżka na miękkiej i czystej powierzchni, aby zapobiec zarysowaniom.
- Always use the correct tools as specified in the assembly steps.
- Nie dokręcaj śrub zbyt mocno, gdyż może to uszkodzić materiał.
- Podczas montażu małe części należy trzymać z dala od dzieci, aby uniknąć ryzyka zadławienia.
- Okresowo sprawdzaj wszystkie połączenia, aby mieć pewność, że są dobrze dokręcone.
- The maximum weight capacity for this bed frame is 400 kg. Do not exceed this limit.
Zawartość opakowania
Sprawdź, czy w pakiecie znajdują się wszystkie poniższe elementy:
- Side panels (long and short)
- Headboard/Footboard panels
- Plywood slats
- Center support beam (if applicable)
- Pakiet osprzętu (śruby, nakrętki, klucz imbusowy)

Obraz: Dimensions of the vidaXL Bed Frame (Model 842009). Overall dimensions are 203 cm (length) x 163 cm (width) x 17 cm (height). The internal dimensions for the mattress are 200 cm (length) x 160 cm (width).
Konfiguracja i montaż
Aby zapewnić prawidłowy montaż, należy dokładnie wykonać poniższe kroki:
- Rozpakuj i zidentyfikuj części: Carefully unpack all components and lay them out on a clean, soft surface. Identify each part using the provided parts list (if included).
- Złóż boki ramy: Attach the side panels to the headboard and footboard panels using the provided screws and an Allen key. Ensure all connections are secure but do not overtighten initially.
- Pomoc techniczna Centrum instalacji (jeśli dotyczy): If your model includes a center support beam, install it now according to the instructions, ensuring it is properly aligned and secured.
- Zamontuj listwy: Place the plywood slats across the bed frame. Secure each slat to the side rails using the provided screws. Ensure even spacing between slats for optimal mattress support.

Obraz: Detail of a corner joint on the bed frame, showing the secure screw connection for structural integrity.

Obraz: View of the plywood slats properly installed within the bed frame, providing a sturdy base for the mattress.

Obraz: Kątowy view of the fully assembled vidaXL bed frame, ready for a mattress.
Instrukcja obsługi
Once assembled, the bed frame is ready for use. Simply place your 160 x 200 cm mattress directly onto the plywood slats. The slats are designed to provide even weight distribution and keep the mattress in place.

Obraz: The vidaXL bed frame with a mattress and bedding, showcasing its appearance in a bedroom environment.
Konserwacja
- Czyszczenie: Wytrzyj ramę łóżka wodąamp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the Sonoma Oak finish.
- Kontrola: Okresowo sprawdzaj dokręcenie wszystkich śrub i nakrętek. W razie potrzeby dokręć je, aby zachować stabilność i bezpieczeństwo.
- Środowisko: Keep the bed frame in a dry environment. Avoid prolonged exposure to direct sunlight or extreme temperature changes.

Obraz: Zbliżenie view of the Sonoma Oak wood material, highlighting its texture and finish.
Rozwiązywanie problemów
- Piszczące dźwięki: If the bed frame makes squeaking noises, check all connections and tighten any loose screws or bolts. Ensure the mattress is properly seated on the slats.
- Niestabilność: If the bed frame feels unstable, verify that all panels are correctly aligned and all hardware is fully tightened. Ensure the bed is on a flat, even surface.
- Uszkodzone części: Jeśli jakakolwiek część jest uszkodzona lub jej brakuje po otrzymaniu przesyłki, nie należy kontynuować montażu. Skontaktuj się z obsługą klienta w celu uzyskania części zamiennych.
Specyfikacje
| Numer modelu | 842009 |
| Marka | vidaXL |
| Kolor | Dąb Sonoma |
| Tworzywo | Engineered Wood (Frame), Plywood (Slats) |
| Wymiary całkowite (dł. x szer. x wys.) | 203 x 163 x 17 cm (79.92 x 64.17 x 6.69 cala) |
| Suitable Mattress Size (W x L) | Wymiary: 160x200 cm |
| Maksymalna zalecana waga | 400 kilogramów |
| Waga przedmiotu | 25.2 kilogramów |
| Instrukcje pielęgnacji produktu | Wytrzyj Damp Płótno |
Gwarancja i wsparcie
For warranty information or technical support, please refer to the purchase documentation or contact vidaXL customer service. Keep your proof of purchase for any warranty claims.