Armacost Lighting RibbonFlex Pro 24V Tunable White COB LED Strip Light Tape (Model 174630)

Wstęp

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Armacost Lighting RibbonFlex Pro 24V Tunable White COB LED Strip Light Tape, Model 174630. This continuous LED strip light features COB (Chip-on-Board) and CCT (Correlated Color Temperature) technology, offering seamless, spot-free illumination with adjustable white light from warm (2700K) to cool (5000K). It is designed for various indoor accent lighting applications, including under cabinet lighting, and can be customized by cutting to size.

Note: A 24V power supply and an Armacost Lighting ProLine Tunable White LED Controller are required for operation and are sold separately.

A coiled roll of Armacost Lighting RibbonFlex Pro COB LED tape light, showcasing its continuous white illumination and tunable color temperature range of 2700K-5000K. The packaging highlights it as a 24-volt, 32-foot product.

Informacje dotyczące bezpieczeństwa

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Always disconnect power at the circuit breaker before installing or servicing.
• This product is intended for indoor use only. Do not expose to moisture or outdoor elements.
• Use only with a compatible 24V DC power supply and controller (sold separately).
• Nie należy instalować w miejscach, w których panują ekstremalne temperatury lub wysoka wilgotność.
• Aby zapobiec zwarciom, należy upewnić się, że wszystkie połączenia są solidne i zaizolowane.
• Do not bend the LED strip light sharply or apply excessive force, as this may damage the internal components.
• Do not cover the LED strip light with materials that may impede heat dissipation.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• 1 x COB LED Strip Light (32.8 ft / 10M)
• 1 x 6-inch Tape-to-Tape Connector
• 1 x Tape-to-Tape Splice Connector
• 2 x 48-inch Pre-Wired Wire Leads
• 2 x Wire Support Clips

This image displays the components included with the LED tape light: the continuous tunable white COB tape light itself, a wire connector for bridging gaps or making turns, a splice connector for end-to-end joining, and two wire support clips. It also notes that a 24-volt power supply and ProLine Tunable White LED Controller are required and sold separately.

Konfiguracja i instalacja

1. Zagadnienia do rozważenia przed instalacją

• Zasilacz i sterownik: Ensure you have a compatible 24V DC power supply and an Armacost Lighting ProLine Tunable White LED Controller (both sold separately) before beginning installation.
• Planowanie: Plan your layout carefully. Measure the areas where the LED strip will be installed.
• Przygotowanie powierzchni: The installation surface must be clean, dry, and smooth. Clean the surface with isopropyl alcohol and allow it to dry completely.

2. Cutting the LED Strip

The RibbonFlex Pro LED strip can be cut to custom lengths. Locate the designated cut marks on the strip, typically indicated by a copper pad and a scissor icon. Cut only at these marks to avoid damaging the circuit.

3. Connecting Strips and Wire Leads

Use the included connectors for custom configurations:

• Tape-to-Tape Connector: Use this connector to bridge small gaps or make turns in your installation.
• Tape-to-Tape Splice Connector: This connector allows you to join two separate LED strip segments end-to-end for longer continuous runs.
• Pre-Wired Wire Leads: These leads can be used to connect the LED strip to the controller or to extend the connection over obstacles.

This image details the customization options using the included connectors. A wire connector is shown for making turns or jumping obstacles, and for creating two wire leads. A splice connector is also depicted, used for connecting tape light strips end-to-end for longer runs.

4. Mounting the LED Strip

1. Peel off the protective backing from the 3M adhesive tape on the back of the LED strip.
2. Carefully press the LED strip onto the prepared surface, ensuring firm and even contact along its entire length.
3. Use the included wire support clips to secure any loose wiring or to provide additional support for the strip, especially at corners or connection points.

5. Connecting to Power and Controller

• Connect the LED strip (or its wire leads) to the Armacost Lighting ProLine Tunable White LED Controller. Follow the controller's specific wiring instructions.
• Connect the controller to the 24V DC power supply.
• Plug the 24V DC power supply into a standard electrical outlet.

This image highlights five key features of the LED tape light: Tunable CCT (Correlated Color Temperature), Dimmable functionality, ability to Cut to Size, Peel & Stick adhesive for easy installation, and its Flexible design. The background shows the tape light installed under kitchen cabinets.

Instrukcja obsługi

Operation of the RibbonFlex Pro Tunable White LED Strip Light is managed through the Armacost Lighting ProLine Tunable White LED Controller (sold separately).

• Włączanie/wyłączanie: Use the designated power button on your controller to turn the lights on or off.
• Ściemnianie: The LED strip is dimmable from 0% to 100%. Use the brightness controls on your controller to adjust the light intensity to your preference.
• Sterowanie przestrajalną bielą (CCT): Adjust the color temperature from warm white (2700K) to cool white (5000K) using the CCT controls on your controller. This allows you to select the ideal white light shade for any environment or task.

The image illustrates the tunable Correlated Color Temperature (CCT) feature of the LED tape light, showing a gradient from warm white (2700K) to cool white (5000K). A remote control is also visible, indicating the need for a ProLine Tunable White LED Controller (sold separately) for this functionality.

Konserwacja

The RibbonFlex Pro LED Strip Light requires minimal maintenance.

• Czyszczenie: Ensure the power is off before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Kontrola: Periodically check connections for tightness and ensure the strip remains securely mounted.
• Ciepło: Ensure the LED strip is not covered or obstructed, allowing for proper heat dissipation.

Rozwiązywanie problemów

If you encounter issues with your LED strip light, refer to the following common problems and solutions:

Specyfikacje

• Numer modelu: 174630
• Tomtage: 24 woltów prądu stałego
• Cotage: 160 watts (for 32.8 ft)
• Strumień świetlny: 6396 Lumens (for 32.8 ft)
• Lumens per Foot: 240 Lumens/Ft
• Temperatura barwowa: 2700K - 5000K Tunable White
• Współczynnik oddawania barw (CRI): 90
• Długość życia: 65,000+ hours (continuous use)
• Zastosowanie wewnątrz/na zewnątrz: Wnętrz
• Tworzywo: Miedź, Plastik
• Cechy szczególne: Color Changing, Cuttable, Dimmable, Energy Efficient, Linkable
• Długość elementu: 10.01 metry (32.8 stóp)
• Waga przedmiotu: 3.36 uncji

This image details various specifications of the LED tape light, including its 240 lumens per foot output, UL listing, enhanced conductivity with 2 oz. copper pad thickness, a long lifespan of over 65,000 hours, and tunable color temperature from 2700K to 5000K.

This image illustrates the high Color Rendering Index (CRI) of the RibbonFlex Pro Continuous COB tape light, comparing it to another tape light. The high CRI (90) ensures colors appear more vibrant and realistic, similar to natural sunlight.

Gwarancja

This Armacost Lighting RibbonFlex Pro LED Strip Light is covered by a 3-year limited warranty. For specific details regarding warranty coverage and claims, please refer to the official Armacost Lighting webodwiedź witrynę lub skontaktuj się z działem obsługi klienta.

Wsparcie

For additional assistance, technical support, or to explore compatible accessories, please visit the official Armacost Lighting webstronie lub skontaktuj się z działem obsługi klienta.

Więcej informacji i produktów znajdziesz na stronie Armacost Lighting Store on Amazon.