TAMIYA 95501

Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special Instruction Manual

Model: 95501

Wstęp

This instruction manual provides detailed guidance for the assembly, setup, operation, and maintenance of your Tamiya 95501 Mini 4WD Special Planning Avante Jr. Black Special model kit. The Avante Jr. Black Special is a high-performance 4WD racer featuring a shaft drive mechanism, designed for enthusiasts aged 10 and above. This model emphasizes a distinctive smoked body and black chassis, complemented by hot pink wheels for a striking appearance. Please read this manual thoroughly before beginning assembly to ensure correct construction and optimal performance.

Informacje dotyczące bezpieczeństwa

Please observe the following safety precautions during assembly and operation:

  • Małe części: Zestaw zawiera małe elementy, które mogą stanowić zagrożenie zadławienia. Przechowywać poza zasięgiem małych dzieci.
  • Ostre narzędzia: Assembly requires the use of sharp tools. Exercise caution to prevent injury. Adult supervision is recommended for users under 14 years of age.
  • Baterie: Use only the specified battery type (AA batteries x 2). Do not mix old and new batteries, or different types of batteries. Insert batteries with correct polarity. Remove batteries when the model is not in use for extended periods.
  • Adhesives and Paint: If using adhesives or paint (not included), ensure adequate ventilation and follow the manufacturer's safety instructions.
  • Środowisko operacyjne: Operate the Mini 4WD in appropriate environments, such as designated Mini 4WD tracks, to prevent damage or injury.

Zawartość opakowania

Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie elementy są obecne:

  • Chassis (Type 2)
  • Body (Smoked)
  • Wheels (Large diameter, Hot Pink)
  • Slick Tires
  • Gears (Two types: 5:1 and 4.2:1)
  • Silnik
  • Screws and other small hardware
  • Instrukcja obsługi (ten dokument)
  • Coloring Stickers (Clear type, silver and red lines)

Notatka: 2 AA batteries, adhesives, paint, and assembly tools are nie wliczone i należy go zakupić osobno.

Instrukcja montażu

The Tamiya 95501 Mini 4WD is a plastic model assembly kit. Follow the detailed diagrams and steps provided in the included paper instruction manual for precise assembly. The general steps are outlined below:

  1. Montaż podwozia: Begin by assembling the Type 2 chassis, which is designed for lightweight and efficient gear operation.
  2. Montaż skrzyni biegów: Install the gears into the gearbox. You will choose between two gear ratios: 5:1 for balanced speed and torque, or 4.2:1 for higher top speed.
  3. Montaż silnika: Securely install the included motor into the chassis.
  4. Axle and Wheel Assembly: Attach the axles, large diameter hot pink wheels, and slick tires. Ensure the tires are firmly seated on the wheels.
  5. Przygotowanie ciała: Prepare the smoked body. Apply the specially designed clear type coloring stickers with silver and red lines to enhance the black special appearance.
  6. Montaż na nadwoziu: Mount the completed body onto the chassis.
  7. Kontrole końcowe: Verify all screws are tightened, and moving parts operate smoothly.
Assembled Tamiya Avante Jr. Black Special Mini 4WD car with black body, pink wheels, and 'AVANTE 4 WHEEL DRIVE' spoiler.

Image: The fully assembled Tamiya Avante Jr. Black Special Mini 4WD model, showcasing its distinctive black body, hot pink wheels, and rear spoiler.

Organizować coś

Before operating your Mini 4WD, perform the following setup steps:

  • Montaż baterii: Open the battery compartment on the chassis and insert two AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
  • Gear Ratio Selection: During assembly, you selected either the 5:1 or 4.2:1 gear ratio. The 5:1 ratio provides a good balance for general racing, while the 4.2:1 ratio is optimized for higher speeds on less technical tracks.
  • Kontrola kół i opon: Ensure all wheels spin freely and the slick tires are securely attached.

Instrukcja obsługi

The Tamiya Mini 4WD is designed for racing on specialized Mini 4WD tracks. It is not a remote-controlled vehicle.

  1. Włączanie: Locate the power switch on the chassis and slide it to the "ON" position. The motor will start, and the wheels will begin to spin.
  2. Miejsce na torze: Carefully place the Mini 4WD onto a Mini 4WD track. The guide rollers will help keep the car on the track.
  3. Obserwacja: Observe your Mini 4WD as it races. Note its speed and stability.
  4. Wyłączone: When finished, slide the power switch to the "OFF" position.

For optimal performance, ensure the track is clean and free of obstructions.

Konserwacja

Regular maintenance will help prolong the life and performance of your Mini 4WD:

  • Czyszczenie: After each use, gently wipe down the chassis and body with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
  • Kontrola przekładni: Periodically inspect the gears for wear or damage. Replace worn gears to maintain smooth operation.
  • Kontrola silnika: Ensure the motor is free of debris and spinning efficiently. If performance degrades, consider replacing the motor.
  • Stan opon: Check the slick tires for wear or damage. Worn tires can affect grip and speed.
  • Komora baterii: Keep the battery compartment clean and dry. Remove batteries if storing the model for an extended period.
  • Dokręcenie śrub: Occasionally check that all screws are tight, especially after high-speed runs.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Samochód nie porusza się lub porusza się powoli.
  • Baterie są rozładowane lub nieprawidłowo zainstalowane.
  • Wyłącznik zasilania jest wyłączony.
  • Gears are jammed or damaged.
  • Silnik jest uszkodzony.
  • Replace batteries with fresh ones; check polarity.
  • Upewnij się, że wyłącznik zasilania jest w pozycji „ON”.
  • Inspect gears for debris or damage; clean or replace as needed.
  • Wymień silnik.
Car veers off track frequently.
  • Guide rollers are damaged or not installed correctly.
  • Wheels or tires are loose or damaged.
  • Chassis is bent or damaged.
  • Check and adjust guide rollers; replace if damaged.
  • Ensure wheels and tires are securely attached and undamaged.
  • Inspect chassis for damage; replace if necessary.
Nadmierny hałas podczas pracy.
  • Gears are not meshing correctly or are damaged.
  • Motor is loose or faulty.
  • Inspect and adjust gears; replace if damaged.
  • Ensure motor is securely installed.

Specyfikacje

  • Nazwa modelu: Avante Jr. Black Special
  • Numer modelu: 95501-000
  • Marka: TAMIYA
  • Typ: Mini 4WD Plastic Model Assembly Kit
  • Typ podwozia: Typ 2
  • Układ napędowy: Napęd wałowy 4WD
  • Included Motor: Tak
  • Przełożenia: 5:1 and 4.2:1 (selectable)
  • Opony: Slick Tires
  • Koła: Large Diameter, Hot Pink
  • Kolor nadwozia: Smoked (Black Special)
  • Wymagane baterie: 2 x AA (brak w zestawie)
  • Zalecany wiek: 10 lata i więcej
  • Completed Dimensions (Approximate):
    • Długość: 130 mm (5.1 cale)
    • Szerokość: 86 mm (3.4 cala)
    • Wysokość: 48 mm (1.9 cala)
  • Tworzywo: Plastikowy

Gwarancja i wsparcie

Tamiya products are manufactured to high standards. For any questions regarding assembly, missing parts, or product performance, please refer to the contact information provided on the product packaging or visit the official Tamiya website for customer support. Specific warranty details may vary by region; please consult your retailer or Tamiya's official resources for more information.

Oficjalna Tamiya Webstrona: www.tamiya.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.