1. Wprowadzenie
The Lumens VS-KB21 is an advanced IP camera controller designed for professional video production environments. It provides comprehensive control over up to 255 IP-connected cameras, supporting various communication interfaces including RS-232, RS-422, and Ethernet. Key features include a 4-axis joystick for precise Pan/Tilt/Zoom control, a 3-inch LCD for RTSP preview, and user-assignable keys for quick access to functions. This manual provides detailed instructions for setting up, operating, and maintaining your VS-KB21 controller.
2. Koniec produktuview
Familiarize yourself with the components and controls of the VS-KB21 controller.
2.1 Elementy sterujące na panelu przednim
Rycina 1: Przód view of the Lumens VS-KB21 IP Camera Controller, showing the joystick, LCD screen, and various control buttons and knobs.
- Drążek sterowy: 4-axis control for Pan, Tilt, and Zoom.
- Ekran LCD: 3-inch display for RTSP video preview i nawigacji w menu.
- Gałki: Dedicated controls for Iris, Shutter, Gain, White Balance, and Focus.
- Klawiatura: Numeric and function keys for camera selection, preset recall, and menu input.
- User-Assignable Keys (F1, F2): Możliwość dostosowania przycisków funkcyjnych.
- Zoom Seesaw Lever: For precise zoom control (Tele/Wide).
2.2 Połączenia panelu tylnego
Rysunek 2: Tył view of the Lumens VS-KB21 IP Camera Controller, highlighting the connectivity ports.
- Port RS-422: For serial communication with cameras.
- Port RS-232: For serial communication with cameras.
- Port serwisowy: USB port for firmware updates and service.
- Port ETHERNET: RJ-45 connector for IP control and PoE (Power over Ethernet).
- WEJŚCIE DC 12V: Wejście zasilania dla dołączonego zasilacza DC.
- Przycisk zasilania: Wyłącznik zasilania urządzenia.
- LOCK Slot: Do kabla zabezpieczającego.
3. Konfiguracja
Follow these steps to set up your VS-KB21 controller.
- Podłączenie zasilania:
- Connect the provided DC 12V power adapter to the 'DC IN 12V' port on the rear panel and plug it into a power outlet.
- Alternatively, if using a PoE-enabled network switch, connect an Ethernet cable from the switch to the 'ETHERNET' port. The unit will power on via PoE.
- Network Connection (for IP Control):
- Connect an Ethernet cable from the 'ETHERNET' port on the controller to your network switch or router. Ensure the controller and IP cameras are on the same network segment.
- Serial Connection (for RS-232/RS-422 Control):
- For RS-232 control, connect a serial cable from the 'RS-232' port on the controller to the camera's RS-232 port.
- For RS-422 control, connect a serial cable from the 'RS-422' port on the controller to the camera's RS-422 port.
- Pierwsze włączenie:
- Flip the 'POWER' switch to the ON position. The LCD screen will illuminate, and the controller will initialize.
- Konfiguracja aparatu:
- Access the controller's settings menu via the LCD to add and configure your IP or serial cameras. Refer to the on-screen prompts for IP address, port, and protocol settings (VISCA, VISCA Over IP).
4. Instrukcja obsługi
This section details the operation of the VS-KB21 controller for managing your cameras.
4.1 Wybór kamery
- Press the 'CAM LIST' button to view a list of configured cameras.
- Use the numeric keypad (CAM 1-7) or the joystick to select the desired camera.
- Naciśnij „ENTER”, aby potwierdzić wybór.
4.2 Sterowanie obrotem, pochyleniem i powiększeniem (PTZ)
- Panoramowanie/pochylanie: Move the 4-axis joystick left/right for pan and up/down for tilt.
- Brzęczenie: Rotate the joystick head or use the 'TELE' (zoom in) and 'WIDE' (zoom out) buttons on the seesaw lever.
- PTZ Speed: Adjust the 'PTZ SPEED' knob to control the responsiveness of the joystick.
4.3 Kontrola ostrości
- Press the 'AUTO FOCUS' button for automatic focus adjustment.
- For manual focus, use the 'FOCUS' knob: rotate 'NEAR' to focus on closer objects, 'FAR' for distant objects.
4.4 Exposure and White Balance
- Tryb ekspozycji: Press 'EXPOSURE MODE' to cycle through auto, manual, and shutter priority modes.
- Iris/Shutter/Gain: Use the dedicated knobs to adjust these parameters in manual exposure mode.
- Balans bieli: Press 'WB MODE' to select white balance presets or 'ONE PUSH WB' for automatic one-push white balance.
4.5 Ustawienia wstępne
- Zapisywanie ustawienia wstępnego: Position the camera as desired, then press 'SAVE' followed by a numeric key (0-9) to store the preset.
- Przywoływanie ustawienia wstępnego: Press 'CALL' followed by the numeric key corresponding to the saved preset.
4.6 RTSP Preview
- The 3-inch LCD screen supports RTSP video preview from the selected IP camera. Ensure the camera's RTSP stream is correctly configured in the controller's settings.
- Press 'PVW' to toggle the preview włącz/wyłącz.
5. Konserwacja
Proper maintenance ensures the longevity and optimal performance of your VS-KB21 controller.
- Czyszczenie: Use a soft, dry cloth to clean the exterior of the controller. For stubborn marks, a slightly damp Można używać ściereczki zwilżonej łagodnym detergentem, upewniając się, że do wnętrza urządzenia nie dostanie się żaden płyn.
- Składowanie: Przechowuj kontroler w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur, gdy nie jest używany.
- Aktualizacje oprogramowania układowego: Periodically check the Lumens official website for firmware updates. Updates can be installed via the 'SERVICE' USB port.
- Unikaj płynów: Nie wystawiaj kontrolera na działanie wody lub innych płynów.
- Unikaj uderzenia: Protect the device from physical shocks and drops, especially the joystick.
6. Rozwiązywanie Problemów
Rozwiązania typowych problemów znajdziesz w tej sekcji.
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Kontroler nie włącza się. | No power supply; Power switch off; Faulty power adapter/PoE. | Ensure power adapter is connected and outlet is active. Check PoE connection. Verify power switch is ON. |
| Cannot control camera via IP. | Incorrect IP settings; Network issue; Camera not configured; Firewall blocking. | Verify IP address, subnet mask, and gateway settings. Ensure controller and camera are on the same network. Check camera configuration in controller. Disable firewalls temporarily for testing. |
| No RTSP preview na wyświetlaczu LCD. | Incorrect RTSP stream URL; Network congestion; Camera not streaming. | Confirm the RTSP stream URL in the controller's settings matches the camera's output. Check network bandwidth. Ensure the camera is actively streaming. |
| Joystick control is unresponsive or erratic. | Loose cable connection; Joystick calibration needed; Physical damage. | Check all cable connections. Refer to the controller's menu for joystick calibration options. If issues persist, contact support. |
7. Specyfikacje
Detailed technical specifications for the Lumens VS-KB21 IP Camera Controller.
| Funkcja | Opis |
|---|---|
| Interfejs komunikacyjny | RS-232 / RS-422 / IP (Ethernet) |
| Wyświetlacz | 3-calowy wyświetlacz LCD |
| Drążek sterowy | 4-axis (Pan / Tilt / Zoom) |
| Kontrola prędkości | 1 Pokrętło |
| Kontrola powiększenia | 1 Seesaw Lever |
| Kontrola wzmocnienia | Wzmocnienie R/B |
| Kontrola ostrości | Auto / Manual |
| Przypisywalne przyciski | 2 (F1, F2) |
| Klawiatura | Podświetlany |
| Stream Preview | RTSP |
| Szybkość transmisji | 2400 / 4800 / 9600 / 38400 / 115200 bps |
| Camera Address Range | 1~255 |
| Ustawienia wstępne | 255 |
| Moc | DC12V/PoE |
| Wymiary (szer. x wys. x gł.) | 11.89 x 5.63 x 4.41 cala (30.2 x 14.3 x 11.2 cm) |
| Waga | 2.8 funtów (1.27 kg) |
| Kolor | Czarny |
| Nazwa modelu | VS-KB21 |
8. Gwarancja i wsparcie
For warranty information, technical support, or service inquiries, please visit the official Lumens webOdwiedź witrynę lub skontaktuj się z autoryzowanym dealerem. Zachowaj paragon jako dowód zakupu na wypadek roszczeń gwarancyjnych.
Lumeny Webstrona: www.mylumens.com