BoxWave DirectSync PD Cable (3ft) - USB-C to USB-C (100W) Instruction Manual

1. Wprowadzenie

This manual provides essential instructions for the proper use and maintenance of your BoxWave DirectSync PD Cable. This USB-C to USB-C cable is designed for efficient power delivery up to 100W and high-speed data transfer, compatible with various USB-C devices, including the XTool XT90.

Image 1.1: The BoxWave DirectSync PD Cable, coiled for storage.

2. Funkcje produktu

• Dostawa mocy 100 W: Supports fast charging for a wide range of USB-C devices, including laptops, tablets, and smartphones, with power delivery up to 100 Watts.
• Szybki transfer danych: Facilitates data synchronization at speeds up to 480Mbps, allowing for quick file transfers while charging.
• Trwała pleciona konstrukcja: Constructed with high-grade nylon braiding for enhanced durability, resistance to tangles, and protection against daily wear and tear.
• Reinforced Strain Relief: Features rubberized grommet strain reliefs at both connector ends to prevent cable fraying and ensure a stable connection over time.
• Uniwersalna zgodność ze standardem USB-C: Designed for use with USB-C enabled devices, such as the XTool XT90.

Image 2.1: The cable connected to a laptop, illustrating its power delivery capability.

Image 2.2: The cable simultaneously charging a laptop and a smartphone, demonstrating charge and sync functionality.

3. Konfiguracja i połączenie

1. Identyfikacja portów: Ensure your device and power source (e.g., wall adapter, computer) have compatible USB-C ports.
2. Podłącz do źródła zasilania: Insert one end of the BoxWave DirectSync PD Cable into a USB-C power adapter or a USB-C port on a computer.
3. Połącz z urządzeniem: Insert the other end of the cable into the USB-C port of your device (e.g., XTool XT90, laptop, smartphone).
4. Sprawdź połączenie: Confirm that both ends of the cable are securely seated in their respective ports. Your device should indicate that it is charging or connected for data transfer.

Image 3.1: The BoxWave DirectSync PD Cable connected to an XTool XT90 device.

4. Instrukcja obsługi

4.1 Ładowanie urządzenia

To charge your device, connect the cable as described in the "Setup and Connection" section. The cable supports Power Delivery (PD) up to 100W, allowing for rapid charging when paired with a compatible power adapter and device. Charging speed may vary based on the power source and device capabilities.

4.2 Przesyłanie danych

For data transfer, connect your device to a computer using the BoxWave DirectSync PD Cable. Once connected, your device should appear as a removable storage device or prompt you to select a connection mode (e.g., "File Transfer," "PTP"). Follow your device's instructions to initiate data transfer. The cable supports data speeds up to 480Mbps.

5. Konserwacja i pielęgnacja

• Składowanie: Store the cable in a clean, dry place away from extreme temperatures and direct sunlight. Avoid tightly coiling or bending the cable at sharp angles to prevent internal damage.
• Czyszczenie: Delikatnie przetrzyj kabel i złącza miękką, suchą ściereczką. Nie używaj płynnych środków czyszczących ani materiałów ściernych.
• Obsługiwanie: Always grasp the connector head when plugging or unplugging the cable, rather than pulling on the cable itself. This helps preserve the integrity of the strain relief and internal wiring.
• Kontrola: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.

Obraz 5.1: Zbliżenie view of the durable nylon braided cable design.

Image 5.2: Detail of the reinforced strain relief, designed to prevent cable damage at the connector.

6. Rozwiązywanie Problemów

7. Specyfikacje

• Model: DirectSync PD Cable
• Marka: Fala pudełkowa
• Typ złącza: USB-C do USB-C
• Długość kabla: 3 feet (approximately 100 cm)
• Dostawa energii: Do 100 W
• Prędkość przesyłu danych: Do 480 Mb/s
• Tworzywo: High-grade Nylon Braided
• Kolor: Czarny jak kruk
• Waga przedmiotu: 3 uncji

8. Gwarancja i wsparcie

BoxWave products are designed for reliability and performance. For information regarding warranty coverage, technical support, or to contact customer service, please visit the official BoxWave website or refer to the product packaging for specific details.

Webstrona: www.boxwave.com