ID-COOLING SE-214-XT CPU Cooler Instruction Manual

1. Koniec produktuview

The ID-COOLING SE-214-XT is an all-black CPU air cooler designed for efficient heat dissipation. It features a single tower design with four direct-contact heat pipes and a 120mm PWM fan. This cooler is compatible with a wide range of Intel and AMD sockets, offering a thermal design power (TDP) of 180W. Its compact 150mm height ensures broad chassis compatibility, and its design avoids interference with RAM and PCIe slots.

Figure 1: ID-COOLING SE-214-XT Black CPU Cooler

Główne cechy

• Efektywne odprowadzanie ciepła: Single tower with 4 direct-contact heat pipes and a 120mm PWM fan.
• Kompaktowa konstrukcja: 150mm total height for wide chassis compatibility.
• Kompatybilność z pamięcią RAM: Non-interference with memory mounting and PCIe slots.
• Wentylator PWM: 120mm fan with automatic speed control for low noise (15.2~35.2dB(A) Max.) and high airflow (76.16CFM Max.).
• Broad Socket Support: Compatible with Intel LGA1700/1851/1200/1150/1151/1155/1156 and AMD AM4/AM5 sockets.
• Atrakcyjność estetyczna: All-black layout for seamless integration into various PC builds.

Produkt ponadview Wideo

2. Zawartość opakowania

Przed rozpoczęciem instalacji sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:

• Heatsink tower
• Wentylator chłodzący 120 mm PWM
• Mounting hardware for Intel (backplate, brackets, standoffs, screws)
• Mounting hardware for AMD (brackets, standoffs, screws)
• Thermal paste sachet
• Klipy wentylatora

Figure 2: Included components: heatsink, cooling fan, and various mounting hardware for different CPU sockets.

3. Specyfikacje techniczne

Figure 3: Detailed dimensions of the SE-214-XT CPU cooler.

4. Instrukcja instalacji

This section provides step-by-step instructions for installing your ID-COOLING SE-214-XT CPU cooler. Please refer to the official installation video for a visual guide.

Oficjalny film instruktażowy

Intel LGA1700/1851/1200/115X Installation

1. Prepare Backplate: Adjust the Intel backplate screws to the corresponding positions for your socket (LGA1851/1700: pull outward; LGA1200/115X: pull inward). Remove the adhesive backing and install it on the back of the motherboard.
2. Install Standoffs and Brackets: Place the correct standoffs (LGA1851/1700 or LGA1200/115X) onto the motherboard. Position the universal bracket over the standoffs and secure them with screws.
3. Nałóż pastę termoprzewodzącą: Clean the CPU surface thoroughly. Apply a thin, even layer of thermal grease to the CPU. Peel off the protective sticker from the copper plate of the heatsink.
4. Montaż radiatora: Carefully place the heatsink onto the CPU. Secure it by tightening the two screws on each side evenly until snug.
5. Podłącz wentylator: Use the provided fan clips to secure the 120mm PWM fan to the heatsink tower. Connect the 4-pin fan connector to the 'CPU_FAN' header on your motherboard.

Instalacja AMD AM4/AM5

1. Przygotuj płytę główną: Remove the original AMD plastic retention frame from the motherboard, but keep the stock backplate.
2. Install Standoffs and Brackets: Install the red AMD standoffs onto the stock backplate's mounting points. Position the universal bracket over the standoffs and secure them with screws.
3. Nałóż pastę termoprzewodzącą: Clean the CPU surface thoroughly. Apply a thin, even layer of thermal grease to the CPU. Peel off the protective sticker from the copper plate of the heatsink.
4. Montaż radiatora: Carefully place the heatsink onto the CPU. Secure it by tightening the two screws on each side evenly until snug.
5. Podłącz wentylator: Use the provided fan clips to secure the 120mm PWM fan to the heatsink tower. Connect the 4-pin fan connector to the 'CPU_FAN' header on your motherboard.

Figure 4: The cooler's design ensures 100% RAM clearance, preventing interference with memory modules.

5. Instrukcja obsługi

The 120mm PWM fan automatically adjusts its speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise. Once installed and connected to the 'CPU_FAN' header, the fan will operate without further user intervention. Ensure your motherboard's BIOS/UEFI settings for the CPU fan are set to PWM mode for proper automatic speed control.

Figure 5: The 120mm PWM fan provides efficient airflow and quiet operation.

6. Konserwacja

Regularna konserwacja pomaga zapewnić długowieczność i optymalną wydajność chłodzenia procesora.

• Czyszczenie kurzu: Periodically (every 3-6 months, depending on environment) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is not spinning rapidly during cleaning to prevent damage to the bearings.
• Pasta termoprzewodząca: If you remove the heatsink for any reason, it is recommended to clean off the old thermal paste from both the CPU and the heatsink base and apply a fresh layer before reinstallation.
• Kontrola wentylatora: Check the fan for any signs of wear, unusual noise, or reduced performance. If the fan fails, it can be replaced with a compatible 120mm PWM fan.

7. Rozwiązywanie Problemów

Jeśli masz problemy z chłodzeniem procesora, zapoznaj się z poniższymi typowymi krokami rozwiązywania problemów:

• Wysokie temperatury procesora:
  • Ensure the heatsink is securely mounted and making full contact with the CPU.
  • Sprawdź, czy pasta termoprzewodząca została nałożona prawidłowo i równomiernie.
  • Check if the fan is spinning. If not, ensure it is properly connected to the 'CPU_FAN' header.
  • Clean any dust buildup from the heatsink fins and fan.
• Wentylator nie obraca się lub nie wydaje hałasu:
  • Confirm the 4-pin fan connector is fully seated in the 'CPU_FAN' header.
  • Check for any cables or obstructions blocking the fan blades.
  • If the fan is making unusual grinding or rattling noises, it may indicate a faulty bearing and the fan might need replacement.
• Problemy z instalacją:
  • Double-check that you are using the correct mounting hardware for your specific CPU socket.
  • Refer to the installation video and steps carefully to ensure all components are assembled in the correct order.

8. Gwarancja i wsparcie

ID-COOLING products typically come with a standard manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official ID-COOLING website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ID-COOLING customer service through their official channels.

Więcej informacji znajdziesz na stronie ID-COOLING Store on Amazon.