VEVOR Manual Oil Press Machine (Model KYL-580)

1. Wprowadzenie

Thank you for choosing the VEVOR Manual Oil Press Machine, Model KYL-580. This stainless steel oil extractor is designed for efficient hot pressing of various oil-bearing seeds, allowing you to produce fresh, high-quality oil at home. This manual provides essential information for safe operation, assembly, maintenance, and troubleshooting to ensure optimal performance and longevity of your machine.

2. Informacje dotyczące bezpieczeństwa

Please read all safety instructions carefully before operating the VEVOR Manual Oil Press Machine. Failure to follow these instructions may result in injury or damage to the machine.

• Gorące powierzchnie: The pressure cage and other components become very hot during operation due to friction and the alcohol lamp. Always keep hands away from hot components. Use insulated gloves when handling any part of the machine during or immediately after use.
• Alcohol Lamp Bezpieczeństwo: Exercise caution when using the alcohol lamp. Ensure it is placed on a stable, heat-resistant surface. Do not overfill the lamp. Keep flammable materials away from the lamp.
• Stabilne umiejscowienie: Ensure the machine is securely clamped to a stable surface before operation to prevent tipping or movement.
• Przygotowanie materiału: Only use dry materials for pressing. Do not attempt to press wet or excessively moist seeds, as this can damage the machine and reduce oil yield.
• Dzieci i zwierzęta: Keep children and pets away from the machine during operation and when it is hot.
• Czyszczenie: Always allow the machine to cool completely before cleaning. Refer to the 'Maintenance and Cleaning' section for proper cleaning procedures.

3. Składniki produktu

The VEVOR Manual Oil Press Machine comes with several components designed for easy assembly and operation. Familiarize yourself with each part before proceeding with assembly.

• Stainless Steel Hopper: For feeding seeds into the press.
• Press Cage: The main chamber where seeds are pressed.
• Rocker Arm Handle: Used to manually turn the auger for pressing.
• Alcohol Glass Lamp: Provides continuous heat to the press cage.
• Alcohol Lamp Wicks: Replacements for the alcohol lamp.
• Oil Receiver: Cup to collect the extracted oil.
• Fixing Frame: Secures the machine to a table or countertop.
• Szczotka do czyszczenia: For easy cleaning of the press cage.
• Open-end Wrench & Hex Wrench: For assembly and disassembly.

4. Instrukcja montażu

Follow these steps to assemble your VEVOR Manual Oil Press Machine:

1. Attach the Fixing Frame: Secure the main body of the oil press to a sturdy table or countertop using the fixing frame and tightening screws. Ensure it is firmly attached and does not wobble.
2. Install the Press Cage: Insert the auger into the press cage, then attach the press cage assembly to the main body.
3. Mount the Hopper: Place the stainless steel hopper onto the top opening of the press cage.
4. Attach the Rocker Arm Handle: Connect the rocker arm handle to the auger shaft and secure it.
5. Position the Alcohol Lamp and Oil Receiver: Place the alcohol glass lamp and the oil receiver cup beneath the oil outlet of the press cage. Ensure the lamp is stable and the wick is properly inserted.

Refer to Figure 3.1 for a visual guide during assembly.

5. Instrukcja obsługi

Operating your oil press machine involves preparation, preheating, and the pressing process.

5.1 Przygotowanie materiału

• Ensure the seeds are dry and free from debris.
• The machine is compatible with various materials, including peanuts, black sesame seeds, rapeseeds, flaxseeds, tea seeds, almonds, and perilla seeds.

5.2 Podgrzewanie wstępne

1. Fill the alcohol glass lamp with appropriate alcohol (e.g., denatured alcohol).
2. Light the alcohol lamp and position it directly under the press cage's heating area.
3. Preheat the machine for approximately 10 minut. The ideal temperature for the pressure cage is 50-70°C (122-158°F).
4. The alcohol lamp should continue to burn during the entire pressing process to maintain the hot pressing temperature.

5.3 Pressing Process

1. Once the machine is preheated, slowly feed the dry seeds into the hopper.
2. Begin turning the rocker arm handle clockwise at a steady, slow pace. The auger will draw the seeds into the press cage and begin extraction.
3. Oil will start to drip into the oil receiver, and the pressed cake will exit from the end of the press cage.
4. Continue feeding seeds and turning the handle until all desired material is processed. Maintain a consistent turning speed for best results.

6. Konserwacja i czyszczenie

Regular cleaning and maintenance will extend the life of your oil press machine and ensure hygienic operation.

1. Ochłonąć: Always allow the machine to cool completely before attempting to clean it.
2. Demontaż: Detach all removable parts, including the hopper, press cage, auger, and oil receiver.
3. Czyszczenie wstępne: Use the provided cleaning brush to remove any residual oil cake or seed particles from the press cage and auger. This is easiest when the parts are still slightly warm but safe to touch.
4. Mycie: Wash all stainless steel components with warm, soapy water. The machine is constructed primarily from food-grade SUS304 and SUS201 stainless steel, ensuring durability and rust resistance.
5. Płukanie i suszenie: Rinse thoroughly with clean water and dry all parts completely before reassembly or storage to prevent water spots or corrosion.
6. Składowanie: Store the clean, dry machine in a cool, dry place.

7. Rozwiązywanie Problemów

If you encounter issues with your VEVOR Manual Oil Press Machine, refer to the following common troubleshooting tips:

• Niska wydajność oleju:
  • Ensure the machine is adequately preheated to 50-70°C (122-158°F).
  • Verify that the seeds are completely dry. Moisture can significantly reduce oil extraction.
  • Check if the turning speed is consistent and not too fast. A slower, steady pace often yields more oil.
  • Confirm the alcohol lamp is providing continuous heat during pressing.
• Trudność w obracaniu klamki:
  • The press cage might be clogged. Disassemble and clean thoroughly.
  • Ensure seeds are fed gradually and not overpacked into the hopper.
  • Verify that all components are correctly assembled and aligned.
• Machine Wobbles During Operation:
  • Tighten the fixing frame clamps securely to the table or countertop.
  • Ensure the surface the machine is clamped to is stable and robust.
• Nadmierne dymienie:
  • While hot pressing, some vapor is normal. However, excessive smoke might indicate burning. Ensure the alcohol lamp flame is not directly touching the seeds or that the seeds are not excessively roasted prior to pressing. The process should be smoke-free during oil pressing itself.

If problems persist, please contact VEVOR customer support for assistance.

8. Specyfikacje

Technical specifications for the VEVOR Manual Oil Press Machine, Model KYL-580.

9. Gwarancja i obsługa klienta

For warranty information, technical support, or any inquiries regarding your VEVOR Manual Oil Press Machine, please refer to the contact details provided with your purchase or visit the official VEVOR website. Please have your model number (KYL-580) and purchase date ready when contacting support.