1. Wprowadzenie
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Zawartość opakowania
Sprawdź, czy w przesyłce znajdują się wszystkie elementy:
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Podkładka termiczna
- Instrukcja obsługi (ten dokument)
3. Specyfikacje
| Funkcja | Opis |
|---|---|
| Model | M.2 SATA/NVME Enclosure |
| Interfejs | USB 3.2 Gen 2 typu C |
| Szybkość przesyłu danych | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Obsługiwane typy dysków SSD | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Obsługiwane rozmiary dysków SSD | 2230, 2242, 2260, 2280 |
| Maksymalna pojemność | 4TB |
| Zestaw układów scalonych | RTL9210B (Supports UASP, Trim) |
| Tworzywo | Stop aluminium |
| Wymiary | Około 4.92 x 2.83 x 0.67 cala |
| Waga | Około 60 gramów (2.12 uncji) |
| Zgodność z systemem operacyjnym | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Zgodność urządzenia | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Przewodnik konfiguracji
Instalacja dysku SSD 4.1
Aby zainstalować dysk SSD M.2 w obudowie, wykonaj następujące czynności:
- Otwórz obudowę: Push the switch on the side of the enclosure and slide out the inner frame.
- Włóż dysk SSD: Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- Bezpieczny dysk SSD: Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Załóż podkładkę termiczną: Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Zamknij obudowę: Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Podłączanie do urządzenia
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Notatka: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Instrukcja obsługi
5.1 Przesyłanie danych
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, or use your system's file management tools to transfer data.
- Dysk SSD NVMe: Supports transfer rates up to 10Gbps.
- Dysk SSD SATA: Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
5.2 SSD Compatibility
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Rozmiary: 2230, 2242, 2260, and 2280 form factors.
6. Konserwacja
6.1 Rozpraszanie ciepła
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Czyszczenie
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Rozwiązywanie Problemów
- Enclosure not detected:
- Sprawdź, czy dysk SSD jest prawidłowo zainstalowany i zabezpieczony w obudowie.
- Try connecting the enclosure to a different USB port on your device.
- Jeżeli to możliwe, przetestuj przy użyciu innego kabla USB.
- Verify that the SSD itself is functional by testing it in another compatible device if possible.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Niska prędkość transferu:
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Close other applications that might be consuming system resources or disk I/O.
- Check the health of your SSD.
- Enclosure gets hot:
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Oficjalne filmy o produktach
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Informacje o gwarancji
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Wsparcie
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official webmiejscu lub na opakowaniu produktu.