ErGear EGCM13B

ErGear Dual Monitor Desk Mount EGCM13B Instruction Manual

Brand: ErGear | Model: EGCM13B

Wstęp

Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.

Ważne informacje dotyczące bezpieczeństwa

Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.

Verify that your monitor's weight and VESA pattern are within the specified limits.
Do not exceed the maximum load capacity of 26.5 lbs per arm.
Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
Używaj wyłącznie dostarczonego sprzętu.
Trzymaj małe części poza zasięgiem dzieci.

Specyfikacje

Model: EGCM13B
Kompatybilność rozmiaru ekranu: 13 do 34 cala
Weight Capacity (per arm): Do 26.5 funtów
Zgodność z VESA: 75x75 mm, 100x100 mm
Arm Span: 33 cali
Wysokość masztu: 16.3 cali
Typ ruchu: Tilt, Swivel, Rotation, Articulating
Maksymalny kąt nachylenia: 90 stopni
Tworzywo: Stal stopowa
Kolor: Czarny
Typ montażu: Mocowanie stołowe (C-Clamp lub przelotka)
C-Clamp Grubość biurka: 0.39" - 3.15"
Grommet Mount Desk Thickness: 0.39" - 2.17"
Średnica otworu przelotki: 0.47" - 0.79"

Zawartość opakowania

Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.

Główny słup z biurkiem Clamp/Podstawa przelotki
Ramiona z dwoma monitorami
Płytki VESA (2x)
Mounting Hardware (screws, washers, tools)
Klipsy do zarządzania kablami
Instrukcja obsługi

ErGear Dual Monitor Desk Mount components laid out — Image: All components of the ErGear Dual Monitor Desk Mount laid out, including the main pole, dual arms, VESA plates, and various hardware for assembly.

Konfiguracja i instalacja

1. Desk Compatibility Check

Before installation, ensure your desk meets the following criteria:

Tworzywo: Recommended for wooden tables.
Spód: Preferably free of beams or panels that may interfere with installation.
C-Clamp Grubość: 0.39" - 3.15"
Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")

2. Monitor Compatibility Check

Each monitor must meet these conditions:

Rozmiar ekranu: 13 do 34 cala
Waga: Do 26.5 funtów
Otwory montażowe VESA: 75x75 mm or 100x100 mm apart on the back of the monitor.

Diagram showing VESA hole patterns on the back of a monitor — Image: Illustration of VESA mounting hole patterns (75x75mm and 100x100mm) on the back of a monitor, indicating where the mount attaches. It also shows how to remove a monitor's original stand.

3. Assemble the Pole with Clamp Wsparcie

Choose either C-Clamp or Grommet installation based on your desk type.

Video: Demonstrates the installation process of the dual monitor desk mount, including assembling the pole with clamp support for both grommet and C-clamp methods. This video is provided by the seller.

Diagram przedstawiający C-Clamp and Grommet mounting options — Image: Visual guide illustrating the two available mounting options: C-Clamp for desk edges and Grommet mount for desks with existing holes. Includes dimensions for compatible desk thickness and hole diameter.

Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.

4. Assemble the Arm and Pole Wire Clips

Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.

5. Assemble VESA Plate and Monitor

Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.

6. Install the Monitor to the Swivel Arm

Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).

Image showing two monitors mounted on the ErGear Dual Monitor Desk Mount — Image: Two monitors securely mounted on the ErGear Dual Monitor Desk Mount, demonstrating a clean and organized workspace.

Obsługa i regulacje

The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewkomfort:

Regulacja wysokości: Rozluźnij clamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp bezpiecznie.
Przechylenie: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
Obracać: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewpod różnymi kątami.
Obrót: Obróć monitor o 360 stopni, aby przełączać się między orientacją poziomą i pionową.
Wyciąganie/cofanie ramion: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.

Diagram showing tilt, swivel, and rotation adjustments — Image: Visual representation of the monitor's flexible adjustments, including +/-45° tilt, +/-90° swivel, and 360° rotation, allowing for ergonomic positioning.

Konserwacja

Okresowo sprawdzaj wszystkie śruby i połączenia, aby mieć pewność, że są dobrze dokręcone i bezpieczne.
Wyczyść uchwyt miękką ściereczką.amp płótno. Unikaj ściernych środków czyszczących.
Do not disassemble the mount unless instructed to do so.

Rozwiązywanie problemów

Monitory nie są wypoziomowane: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
Góra wydaje się niestabilna: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.

Gwarancja i wsparcie

For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.