MUBVIEW J7, J9 Compatible Chime
MUBVIEW Instrukcja obsługi bezprzewodowego dzwonka wewnętrznego
Models: J7, J9 Compatible Doorbells
1. Koniec produktuview
UMBVIEW Wireless Indoor Chime is designed to work seamlessly with MUBVIEW J7 and J9 wireless video doorbells, providing an audible alert inside your home when the doorbell is pressed. This compact and easy-to-install device ensures you never miss a visitor, even if your phone is not nearby.

Rysunek 1: Przód view z MUBVIEW Wireless Indoor Chime. The device is black with a perforated speaker grille on the lower half and a small blue LED indicator light at the bottom center.
Główne cechy:
- Wireless connectivity for easy setup.
- Multiple chime tones.
- Regulowany poziom głośności.
- Kompaktowa i dyskretna konstrukcja.
- Compatible with MUBVIEW J7 and J9 wireless video doorbells.
2. Zawartość opakowania
Po rozpakowaniu należy sprawdzić zawartość opakowania, aby upewnić się, że znajdują się w nim wszystkie elementy:
- 1 x MUBVIEW Bezprzewodowy dzwonek wewnętrzny
- 1 x Instrukcja obsługi (ten dokument)
- Note: Batteries are not included and are required for operation.
3. Konfiguracja i instalacja
Aby skonfigurować MUB, wykonaj poniższe krokiVIEW Wireless Indoor Chime:
- Włóż baterie: Open the battery compartment on the back of the chime unit. Insert the required batteries (type not specified, typically AA or AAA). Ensure correct polarity.
- Włączanie: Once batteries are inserted, the chime should power on automatically. A blue indicator light on the front may illuminate.
- Pairing with Doorbell:
- Ensure your MUBVIEW J7 or J9 wireless video doorbell is powered on and in pairing mode (refer to your doorbell's manual for specific instructions).
- On the chime unit, locate the pairing button (usually a small button on the side or back). Press and hold this button for approximately 3-5 seconds until the indicator light flashes rapidly.
- Press your doorbell button once. The chime should ring, indicating successful pairing. If not, repeat the pairing process.
- Umieszczenie: Place the chime in a central location within your home where the sound can be easily heard. The chime has a wireless range of up to 100 meters (328 feet) in open areas.

Rysunek 2: Diagram illustrating the MUBVIEW Wireless Indoor Chime's features, including up to 100M range, adjustable volume (80-110 dB), silent mode, and 4 different ringtones. The image also shows suggested placement within a home layout.
4. Instrukcja obsługi
Once paired, the MUBVIEW Wireless Indoor Chime operates automatically when your doorbell is pressed.
- Regulacja głośności: Locate the volume control button (if present, usually a button with a speaker icon). Press it repeatedly to cycle through available volume levels (e.g., 80dB, 90dB, 100dB, 110dB) or to activate silent mode.
- Wybór dzwonka: Locate the ringtone selection button (if present, usually a button with a music note icon). Press it repeatedly to cycle through the 4 available ringtones.
- Tryb cichy: To activate silent mode, press the volume button until the chime is muted. The indicator light may change color or pattern to signify silent mode.
5. Konserwacja
Aby zapewnić optymalną wydajność i długowieczność Twojego MUBVIEW Wireless Indoor Chime:
- Czyszczenie: Wipe the chime unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Wymiana baterii: When the chime's sound becomes weak or the indicator light behaves erratically, it's time to replace the batteries. Always use new batteries of the specified type.
- Składowanie: If storing the chime for an extended period, remove the batteries to prevent leakage.
6. Rozwiązywanie Problemów
Jeśli masz problemy z MUBVIEW Wireless Indoor Chime, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Chime does not ring. |
|
|
| Chime rings intermittently. |
|
|
| Cannot change ringtone/volume. |
|
|
7. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Marka | MUBVIEW |
| Zgodność modelu | MUBVIEW J7, J9 Wireless Video Doorbells |
| Tworzywo | Plastikowy |
| Źródło zasilania | Zasilany bateryjnie (baterie nie są dołączone) |
| Technologia łączności | Bezprzewodowy |
| Zasięg bezprzewodowej | Do 100 metrów (328 stóp) na otwartej przestrzeni |
| Poziomy głośności | 80 dB, 90 dB, 100 dB, 110 dB |
| Dzwonki | 4 different selectable tones |
| Wymiary opakowania | 8 x 8 x 2 cm (3.15 x 3.15 x 0.79 cala) |
| Waga paczki | 100 gramów (0.22 funta) |
8. Gwarancja i wsparcie
MUBVIEW products are designed for reliability and performance. For warranty information or technical support, please refer to the official MUBVIEW webodwiedź witrynę lub skontaktuj się bezpośrednio z działem obsługi klienta.
Obsługa klienta:
- For assistance with setup, troubleshooting, or product inquiries, please visit www.mubview.com (symbol zastępczy webstrona wsparcia).
- You may also contact your retailer for support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.