BTF-LIGHTING 2.4GHz Wireless RF Remote RC03RFB & C04RF Tuya Controller Kit User Manual

1. Koniec produktuview

This kit includes the BTF-LIGHTING 2.4GHz Wireless RF Remote (RC03RFB) and two C04RF Tuya Controllers, designed for controlling RGBW LED strips. It supports 4-zone group control and can be integrated with Tuya Smart Life APP via a GW01W Tuya Gateway (sold separately) for smart home compatibility.

Obraz 1.1: Koniecview of the 2.4GHz RF Remote and C04RF LED Controller Kit components.

2. Instrukcje konfiguracji

2.1 Zawartość opakowania

• 1x RC03RFB Remote Control
• 2x C04RF Tuya Controllers
• 1x RF Remote Bracket
• 2x Śruby
• 1x Double-sided Adhesive

Note: AAA batteries for the remote and the GW01W Tuya Gateway are not included and must be purchased separately.

2.2 Wymagania dotyczące zasilania

The C04RF Tuya Controller supports DC5V, DC12V, and DC24V input. Ensure your power supply matches the voltage requirements of your LED strip. The maximum allowable current through the two power interfaces of the controller is 5A and 12A respectively.

Image 2.1: The C04RF controller features two power input interfaces, supporting DC12V or DC24V. The 5.5mm x 2.1mm DC power jack input voltage equals the output voltage.

2.3 Schemat okablowania

Connect your RGBW LED strip to the C04RF controller according to the wiring diagram. Ensure correct polarity and connection of the R, G, B, W, and V+ wires.

• V+: Positive power connection.
• R: Red channel output.
• G: Green channel output.
• B: Blue channel output.
• W: White channel output.

Image 2.2: Detailed wiring diagram showing how to connect the power supply and RGBW LED strip to the C04RF controller.

2.4 Controller Pairing (Remote Control)

To pair the RC03RFB remote with a C04RF controller:

1. Upewnij się, że kontroler jest wyłączony.
2. Włącz kontroler.
3. Within 3 seconds of powering on, press one of the Zone ON buttons (1, 2, 3, or 4) on the remote control.
4. The connected LED strip will flash three times to indicate successful pairing.

To unpair a controller from a zone:

1. Upewnij się, że kontroler jest wyłączony.
2. Włącz kontroler.
3. Within 3 seconds of powering on, press the corresponding Zone OFF button (1, 2, 3, or 4) five times.
4. The connected LED strip will flash ten times to indicate successful unpairing.

3. Instrukcja obsługi

3.1 Remote Control Functions (RC03RFB)

The RC03RFB remote control features a touch color wheel and various buttons for comprehensive control of your LED strips.

Image 3.1: Diagram illustrating the buttons and functions of the RC03RFB remote control and the C04RF controller.

• WŁ./WYŁ.: Master power control for all paired zones.
• Pierścień kolorowy: Touch to select desired color (16 million colors).
• pilot lamp: Indicates remote activity.
• Tryby dynamiczne: Cycle through various pre-programmed lighting effects.
• Jasność +/-: Dostosuj poziom jasności.
• 7 Colors Switching: Quickly switch between 7 primary colors.
• Color Temp/Saturation: Adjust color temperature for white light or saturation for RGB colors.
• White Light (W): Activate pure white light.
• Prędkość +/-: Dostosuj prędkość trybów dynamicznych.
• Strefa WŁ./WYŁ. (1-4): Turn individual zones on or off.
• Tryb światła nocnego: Activates a low-brightness white light.

3.2 Kontrola grupowa

The RC03RFB remote supports 4-zone group control, allowing you to manage multiple controllers independently or together. Each remote can be matched with one or more controllers per zone.

Image 3.2: Illustration of 4-zone group control, demonstrating how different areas can be controlled independently.

The controllers feature an auto-transmitting function. One controller can transmit signals from the remote to another controller within 30 meters (98 feet), extending the effective control distance.

Image 3.3: Diagram explaining the auto-transmitting function, where controllers relay signals to extend the control range.

3.3 App Control (Requires GW01W Tuya Gateway)

For advanced control features, including voice control with Alexa and Google Home, timer settings, device sharing, and automation, a GW01W Wi-Fi+Bluetooth Dual Mode Tuya Gateway is required (not included).

Image 3.4: The system supports smartphone app control and third-party voice control when connected to a Tuya Gateway.

Steps to Control LED Strip through APP:

1. Włącz źródła światła: Podłącz pasek LED do źródła zasilania.
2. Power the GW01W Tuya Gateway: Install the gateway within 30m of the lights and near your WiFi router.
3. Download Smart Life or Tuya Smart App & Connect to Gateway: Create an account, add the device, select the device working WiFi, and enter the password. Ensure the gateway indicator shows blue light (Linking). Connection is successful when the light shows green.
4. Link the Lights or Controller to GW01W Gateway: Switch off the lights you want to link, then switch them on again. Press the "SET" button on the 2.4G gateway once within 5 seconds. The lights will blink 3 times slowly, indicating successful linking.

Image 3.5: Step-by-step guide on how to connect and control your LED strip using the Smart Life or Tuya Smart app via the GW01W Tuya Gateway.

4. Konserwacja

To ensure optimal performance and longevity of your BTF-LIGHTING controller kit, follow these maintenance guidelines:

• Czyszczenie: Use a soft, dry cloth to clean the remote control and controllers. Avoid using abrasive cleaners or solvents.
• Wymiana baterii: The RC03RFB remote control uses AAA batteries. Replace them when the remote's response becomes sluggish or inconsistent. Ensure correct polarity when inserting new batteries.
• Środowisko: Keep the controllers and remote away from excessive moisture, extreme temperatures, and direct sunlight.

5. Rozwiązywanie Problemów

If you encounter issues with your BTF-LIGHTING controller kit, refer to the following common problems and solutions:

• LED Strip Not Responding to Remote:
  • Check if the remote's batteries are depleted and replace them if necessary.
  • Ensure the controller is powered on and the LED strip is correctly connected.
  • Re-pair the remote control with the controller following the instructions in Section 2.4.
  • Verify that the remote is within the 30-meter (98 feet) control range of the controller.
• Nieprawidłowe kolory lub migotanie:
  • Check the wiring connections between the LED strip and the controller for any loose or incorrect connections (R, G, B, W, V+).
  • Upewnij się, że napięcie zasilaniatagodpowiada wymaganiom taśmy LED.
• Kontrola aplikacji nie działa:
  • Confirm that the GW01W Tuya Gateway is properly set up and connected to your home Wi-Fi network.
  • Ensure the controller is successfully linked to the Tuya Gateway (refer to Section 3.3).
  • Check your Wi-Fi signal strength and ensure the gateway is within range of both the router and the controllers.
• Remote Control Color Wheel is Too Sensitive:
  • This is a known characteristic of the touch wheel design. Exercise care when adjusting colors to achieve the desired shade.

6. Specyfikacje

7. Informacje o gwarancji

BTF-LIGHTING products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact BTF-LIGHTING customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

8. Obsługa klienta

For technical assistance, troubleshooting, or product inquiries, please contact BTF-LIGHTING customer support through the retailer's platform or visit the official BTF-LIGHTING webwitryna do informacji kontaktowych.