1. Ważne instrukcje bezpieczeństwa
Read all instructions carefully before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Always unplug the fan from the power outlet before cleaning, servicing, or when not in use.
- Nie zanurzaj wentylatora, wtyczki ani przewodu w wodzie ani innych płynach.
- Trzymaj wentylator z dala od dzieci i zwierząt domowych.
- Do not operate the fan with a damaged cord or plug, or if the fan malfunctions or has been dropped or damaged in any manner.
- Aby zapobiec przewróceniu się wentylatora, należy ustawić go na stabilnej i równej powierzchni.
- Nie wkładaj palców ani żadnych przedmiotów przez osłonę wentylatora, gdy wentylator pracuje.
- Use only clean, distilled water in the water tank to prevent mineral buildup and ensure proper misting function.
- Do not use the fan outdoors or in wet conditions unless specifically designed for such use.
2. Koniec produktuview
The Milex MMF001 XL Misting Fan is designed to provide cooling and humidification for indoor environments. It features multiple speed and mist settings, an oscillation function, and a timer for customized comfort.
Główne cechy:
- Misting function with 3 mist settings
- 3 ustawienia prędkości wentylatora
- Oscillation function for wide coverage
- Adjustable humidifier
- Safety fan guard
- 60-minutowy timer
- Pojemność zbiornika na wodę 3.2 l
Schemat komponentów:
This image displays the Milex MMF001 XL Misting Fan with its key components labeled. These include the radial guard, the tilt-adjustable fan head, the control panel featuring a 60-minute timer and 3 speed settings, the flexible mist hose, the transparent water tank, and the adjustable mist volume control knob.
3. Konfiguracja
3.1 Montaż
Carefully unpack all components. Ensure all parts are present and undamaged. Follow the assembly instructions provided in the packaging to securely attach the fan head to the stand, and the stand to the base. Ensure the fan guard is properly secured before operation.
3.2 Napełnianie zbiornika na wodę
- Ensure the fan is unplugged from the power outlet.
- Carefully remove the water tank from the base of the fan.
- Unscrew the cap at the bottom of the water tank.
- Fill the tank with clean, distilled water. Do not exceed the maximum fill line.
- Dokładnie przykręć nakrętkę do zbiornika.
- Place the filled water tank back onto the fan base, ensuring it is seated correctly.
Na tym zdjęciu widać szczegółowy view of the transparent water tank located at the base of the fan, along with the mist control knob labeled 'POWER' and 'WATERLESS'. This knob is used to adjust the mist output.
3.3 Umieszczenie
Place the fan on a firm, level surface. Ensure there is adequate space around the fan for proper air circulation and oscillation. Keep the fan away from curtains or other objects that could obstruct airflow or be drawn into the fan blades.
4. Instrukcja obsługi
Once assembled and the water tank is filled, plug the fan into a suitable power outlet. Use the control panel and knobs to operate the fan.
This image provides a close-up of the fan's control panel. It features a rotary dial for the 60-minute timer (marked 10, 20, 30, 40, 50, 60, ON, OFF) and a series of buttons for mist settings (0, 1, 2, 3) and fan speed settings (1, 2, 3).
4.1 Powering On/Off and Fan Speed
- To turn the fan on, press the desired speed button (1, 2, or 3) on the control panel.
- Speed 1 is the lowest setting, and Speed 3 is the highest.
- To turn the fan off, press the '0' button or rotate the timer dial to 'OFF'.
4.2 Misting Function
- To activate the misting function, ensure the water tank is filled.
- Press the desired mist setting button (1, 2, or 3) on the control panel.
- Mist setting 1 provides the lowest mist output, and Mist setting 3 provides the highest.
- To turn the mist function off, press the '0' mist button.
- The mist volume can also be finely adjusted using the rotary knob on the base of the fan.
4.3 Funkcja oscylacji
To activate the oscillation, press the oscillation button located on the top of the motor housing. Press it again to stop oscillation at the desired direction.
4.4 Funkcja timera
The fan features a 60-minute timer. Rotate the timer dial on the control panel to set the desired operating duration (e.g., 10, 20, 30, 40, 50, 60 minutes). The fan will automatically turn off once the set time has elapsed. To operate continuously, set the dial to 'ON'.
4.5 Adjusting Fan Tilt
To adjust the vertical angle of the fan head, loosen the tilt adjustment knob located on the side of the fan stand, tilt the fan head to the desired position, and then securely tighten the knob.
5. Konserwacja
Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your Milex MMF001 XL Misting Fan.
5.1 Czyszczenie wentylatora
- Zawsze odłączaj wentylator od zasilania przed czyszczeniem.
- Użyj miękkiego, damp Ściereczką przetrzeć zewnętrzne powierzchnie wentylatora. Nie używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
- To clean the fan blades, remove the front fan guard according to the assembly instructions. Wipe the blades with a soft, damp ściereczką. Przed ponownym założeniem osłony upewnij się, że ostrza są całkowicie suche.
- Nie pozwól, aby woda dostała się do obudowy silnika.
5.2 Cleaning the Water Tank and Mist Nozzle
- Empty any remaining water from the tank after each use or if the fan will not be used for an extended period.
- Clean the water tank regularly with a mild detergent and rinse thoroughly with clean water. This prevents mineral buildup and bacterial growth.
- If the mist output is reduced, the mist nozzle may be clogged. Gently clean the nozzle with a soft brush or cotton swab.
5.3 Przechowywanie
When storing the fan, ensure it is clean and dry. Store it in its original packaging or a suitable box in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Rozwiązywanie Problemów
If you encounter issues with your Milex MMF001 XL Misting Fan, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Wentylator nie włącza się | No power supply; Timer set to OFF; Fan not plugged in securely | Check power outlet; Ensure timer is set to ON or a duration; Securely plug in the fan |
| Brak mgły lub słaba mgła | Water tank empty; Mist nozzle clogged; Water tank not seated correctly | Refill water tank; Clean mist nozzle; Re-seat water tank properly |
| Wentylator wydaje nietypowy dźwięk | Fan blades obstructed; Loose parts; Fan not on a level surface | Unplug and check for obstructions; Ensure all parts are securely fastened; Place fan on a stable, level surface |
| Oscylacja nie działa | Oscillation button not pressed; Mechanism obstructed | Press oscillation button; Unplug and check for obstructions around the oscillation mechanism |
Jeśli po wypróbowaniu tych rozwiązań problem nadal występuje, skontaktuj się z obsługą klienta.
7. Specyfikacje
| Specyfikacja | Szczegół |
|---|---|
| Marka | Milex |
| Numer modelu | MMF001 |
| Kolor | Czarny |
| Moc silnikatage | 75 waty |
| Pojemność zbiornika na wodę | 3.2 litrów |
| Waga przedmiotu | 9 kilogramów |
| Wymiary produktu | 4.65D x 6.05W x 3H metres |
| Cechy | 3-speed settings, 3-mist settings, Oscillation function, Adjustable humidifier, 60-minute timer, Safety fan guard |
8. Informacje o gwarancji
This Milex MMF001 XL Misting Fan comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Keep your proof of purchase for any warranty claims.
9. Obsługa klienta
For further assistance, technical support, or to inquire about spare parts, please visit the official Milex weblub skontaktuj się z działem obsługi klienta. Dane kontaktowe zazwyczaj znajdują się na opakowaniu produktu lub oficjalnej stronie marki. webstrona.
Wsparcie online: Visit the Milex Store on Amazon