Varmilo VPE87

Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual

Model: VPE87

Wstęp

The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.

Zawartość opakowania

  • Varmilo VPE87 Mechanical Keyboard
  • Kabel USB-C
  • 2.4 GHz Wireless Receiver (typically stored in keyboard)
  • Narzędzie do zdejmowania nakładek klawiszy (może być dołączone)
  • Wyłącznik krańcowy (może być dołączony)

Organizować coś

Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.

1. Physical Connection and Initial Charge

Close-up of the USB-C port on the Varmilo VPE87 keyboard, showing the cable inserted into the 3-way cord channel.

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.

  1. Podłącz dołączony kabel USB-C do portu USB-C klawiatury.
  2. Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
  3. For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).

2. Regulacja kąta klawiatury

Strona profile view of the Varmilo VPE87 keyboard, showing the adjustable kickstand extended to elevate the typing angle.

Obraz: Profesjonalista z bokufile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.

The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.

Instrukcja obsługi

Tryby łączności

The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.

Tryb przewodowy

  • Connect the USB-C cable from the keyboard to your computer.
  • Klawiatura zostanie automatycznie rozpoznana przez system operacyjny.
  • This mode also charges the keyboard's internal battery.

Tryb Bluetooth

  • Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
  • Na swoim urządzeniu (komputerze, tablecie, smartfonie) włącz Bluetooth i wyszukaj nowe urządzenia.
  • Select "Varmilo VPE87" (or similar name) from the list of available devices.
  • Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.

Tryb bezprzewodowy 2.4 GHz

  • Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
  • Podłącz odbiornik USB do dostępnego portu USB w komputerze.
  • Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
  • Klawiatura powinna automatycznie połączyć się z odbiornikiem.

Kontrola podświetlenia

Varmilo VPE87 keyboard with its white LED backlight illuminated, showing the keys clearly visible in a dark environment.

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.

The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:

  • Fn + Arrow Up: Zwiększ jasność podświetlenia.
  • Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
  • Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.

Hotswap Sockets (Switch Customization)

Z góry na dół view of the Varmilo VPE87 mechanical keyboard, showcasing its full layout with unique keycap designs and the overall aesthetic.

Obraz: Góra view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.

The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.

  1. Usuń nakładkę klawisza: Za pomocą ściągacza klawiszy ostrożnie zdejmij wybrany klawisz.
  2. Usuń przełącznik: Za pomocą ściągacza do przełączników ostrożnie chwyć górny i dolny zacisk przełącznika i pociągnij go prosto do góry.
  3. Włóż nowy przełącznik: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
  4. Wymień nasadkę klawisza: Załóż nakładkę klawisza z powrotem na nowy przełącznik.

Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.

Inne funkcje

  • Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
  • 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.

Konserwacja

Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.

  • Czyszczenie nakładek klawiszy:
    • Use a keycap puller to remove keycaps.
    • Wipe keycaps with a damp szmatką i łagodnym roztworem mydła. Unikaj silnych środków chemicznych.
    • Ensure keycaps are completely dry before reattaching.
  • Czyszczenie korpusu klawiatury:
    • Do przecierania powierzchni klawiatury należy używać miękkiej, suchej szmatki.
    • Do usuwania kurzu i zanieczyszczeń spomiędzy klawiszy należy użyć sprężonego powietrza.
  • Składowanie: Przechowuj klawiaturę w chłodnym, suchym miejscu, z dala od bezpośredniego światła słonecznego i ekstremalnych temperatur.
  • Wycieki cieczy: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.

Rozwiązywanie problemów

If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:

ProblemRozwiązanie
Keyboard not responding in Wired Mode.
  • Sprawdź, czy kabel USB-C jest prawidłowo podłączony do klawiatury i komputera.
  • Wypróbuj inny port USB na swoim komputerze.
  • Wypróbuj inny kabel USB-C.
  • Ensure the keyboard is switched to Wired mode if it has a physical mode switch.
Nie można nawiązać połączenia przez Bluetooth.
  • Ensure the keyboard is in Bluetooth pairing mode (refer to operating instructions).
  • Upewnij się, że Bluetooth jest włączony w Twoim urządzeniu.
  • Remove previous pairings of the keyboard from your device's Bluetooth settings and try pairing again.
  • Sprawdź, czy bateria klawiatury jest naładowana.
  • Spróbuj ponownie uruchomić klawiaturę i urządzenie.
Połączenie bezprzewodowe 2.4 GHz jest niestabilne lub nie działa.
  • Ensure the 2.4 GHz USB receiver is securely plugged into a USB port.
  • Wypróbuj inny port USB.
  • Ensure the keyboard is in 2.4 GHz wireless mode.
  • Aby zmniejszyć zakłócenia, przesuń klawiaturę bliżej odbiornika.
  • Sprawdź, czy bateria klawiatury jest naładowana.
Podświetlenie nie działa lub jest słabe.
  • Press Fn + Arrow Up to increase brightness.
  • Upewnij się, że bateria klawiatury jest naładowana, ponieważ niski poziom naładowania baterii może mieć wpływ na wydajność podświetlenia.
A specific key is not registering.
  • If the keyboard has hotswap sockets, gently remove the keycap and switch for the problematic key. Reinsert the switch firmly, ensuring the pins are straight and fully seated.
  • Jeżeli to możliwe, przetestuj przy użyciu innego przełącznika.
  • Wyczyść wszelkie zanieczyszczenia wokół przełącznika.

Specyfikacje

FunkcjaSzczegół
MarkaWarmilo
ModelVPE87
Opis klawiaturyMechaniczny
Technologia łącznościBluetooth, USB-C (Wired), 2.4 GHz Wireless
Liczba kluczy87
PodświetlenieBiała dioda LED (jednokolorowa)
Cechy specjalneBacklit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel
Kompatybilne urządzeniaLaptop, PC, smartfon, tablet
Color (Switches)Kailh Prestige Clicky (as per product listing)

Gwarancja i wsparcie

Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webstrona.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webna stronie internetowej lub za pośrednictwem sprzedawcy, u którego zakupiłeś produkt.

Visit the official Varmilo Store for more information: Sklep Varmilo na Amazonie

© 2023 Varmilo. Wszelkie prawa zastrzeżone.

Niniejsza instrukcja ma charakter wyłącznie informacyjny. Dane techniczne mogą ulec zmianie bez powiadomienia.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.