FOFNON S7 Stainless Steel Cat Water Fountain Instruction Manual

1. Koniec produktuview

The FOFNON S7 Stainless Steel Cat Water Fountain is designed to provide fresh, circulating water for your pets. Its stainless steel construction ensures durability and hygiene, while the multi-filtration system helps maintain water quality. The fountain features a quiet pump and a water level window for convenient monitoring.

Image 1: FOFNON S7 Cat Water Fountain simulating living water flow.

Image 2: FOFNON S7 Cat Water Fountain demonstrating quiet operation (below 30 dB).

2. Instrukcje konfiguracji

Follow these steps to set up your FOFNON S7 Cat Water Fountain:

1. Prepare the Pump and Filters: Disassemble the pump and clean all components. Insert the sponge filter into the pump. Soak the carbon filter in water for 5 minutes before use.
2. Złóż pokrywę: Place the carbon filter into its designated slot on the underside of the lid. Ensure it is securely closed.
3. Zainstaluj pompę: Attach the pump to the designated area on the underside of the lid, ensuring the power cord is threaded through the cable management system to prevent it from getting wet.
4. Napełnij zbiornik: Fill the stainless steel tank with water up to the 'MAX' line, visible through the water level window.
5. Załóż pokrywkę: Carefully place the lid onto the tank, ensuring it sits securely.
6. Attach the Faucet (Optional): Insert the stainless steel faucet into the opening on the lid if desired.
7. Podłącz zasilanie: Plug the USB cable into the provided AC adapter and then into a power outlet. The fountain will begin operating.

3. Instrukcja obsługi

The FOFNON S7 Cat Water Fountain offers two water flow modes:

• Faucet Mode: With the stainless steel faucet installed, water flows like a tap, which can attract pets to drink more.
• Bubbling Mode: Without the faucet, water bubbles up from the center, providing a different drinking experience.

The integrated water level window allows you to easily monitor the remaining water volume without needing to open the lid.

Image 3: Water level window on the FOFNON S7 Cat Water Fountain for easy monitoring.

4. Konserwacja

Regularne czyszczenie i wymiana filtrów są kluczowe dla zachowania jakości wody i długowieczności fontanny.

• Częstotliwość czyszczenia: It is recommended to clean the fountain and pump components every 2-4 weeks.
• Czyszczenie pompy: Disassemble the pump and use the provided cleaning brush to remove any debris or buildup from the impeller and housing.
• Wymiana filtra: Replace the carbon filter every 2-4 weeks, or more frequently if you have multiple pets or notice reduced water flow. The sponge filter should also be cleaned or replaced regularly.
• Można myć w zmywarce: The stainless steel components of the fountain are dishwasher safe for easy cleaning.

Image 4: Multiple filtration system including carbon filter and pump sponge.

5. Rozwiązywanie Problemów

• No Water Flow / Pump Not Working:
  • Sprawdź, czy zasilacz jest prawidłowo podłączony do gniazdka i fontanny.
  • Ensure the water level is above the minimum mark.
  • Disassemble and clean the pump thoroughly, especially the impeller, as hair or debris can obstruct it.
  • Check if the sponge filter is clogged and clean or replace it.
• Nietypowy hałas:
  • Ensure the water level is sufficient; low water levels can cause pump noise.
  • Clean the pump and check for any foreign objects.
  • Ensure the lid is properly seated on the tank.
• Water Spillage:
  • Upewnij się, że fontanna jest umieszczona na płaskiej i stabilnej powierzchni.
  • Do not overfill the tank beyond the 'MAX' line.
  • If your pet plays with the faucet, consider removing it and using the bubbling water flow mode.

6. Specyfikacje

7. Gwarancja i wsparcie

The FOFNON S7 Cat Water Fountain comes with a 2-letnia gwarancja.

For any issues or to find replacement parts, please contact FOFNON customer service. You can search for replacement filters and water pumps by searching "FOFNON filter" and "FOFNON water pump" online.