FavorCOOL FC-SP-250

FavorCOOL FC-SP-250 Macerator Sink Sewerage Pump User Manual

Model: FC-SP-250

1. Wprowadzenie

The FavorCOOL FC-SP-250 is a compact, automatic sewage lift pump designed for residential use. It efficiently pumps clear wastewater from sinks, showers, bathtubs, and laundry facilities to a main sewer system when gravity drainage is not feasible. This pump is engineered for reliability and ease of use, featuring a powerful motor and automatic operation.

2. Instrukcje bezpieczeństwa

Przed instalacją i uruchomieniem należy uważnie przeczytać wszystkie instrukcje bezpieczeństwa, aby zapobiec obrażeniom lub uszkodzeniom. Zachowaj tę instrukcję do wykorzystania w przyszłości.

  • Bezpieczeństwo elektryczne: Ensure the pump is connected to a properly grounded 110V-120V/60Hz power supply. Do not operate with damaged cords or plugs. Disconnect power before any maintenance or service.
  • Rodzaj wody: This pump is designed for clear wastewater only. Do not use for sewage containing solid waste, chemicals, or flammable liquids.
  • Instalacja: Installation should be performed by a qualified professional or in accordance with local plumbing and electrical codes. Ensure all connections are watertight.
  • Temperatura: The pump can withstand continuous water temperatures up to 80°C (176°F) and up to 4 hours at 100°C (212°F). Avoid exceeding these limits.
  • Wentylacja: Należy zapewnić odpowiednią wentylację wokół pompy.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

  • 1 x FavorCOOL Macerator Sink Sewerage Pump
  • 1 x Installation Kits, including:
    • Śruby (2x)
    • Stopy (2x)
    • Check Valve (1x)
    • Side Inlet Cover (1x)
    • Rubber Feet (1x set)
    • Clamps (2x Ø20-40mm, 7x Ø32-50mm)
    • Side Inlet Connect Pipes (2x)
FavorCOOL Macerator Pump product dimensions and list of included accessories.

This image details the physical dimensions of the FavorCOOL Macerator Pump (38x22.5x24cm) and a visual list of all included accessories, such as screws, feet, check valve, side inlet cover, clamps, rubber feet, and side inlet connect pipes.

4. Specyfikacje

Technical specifications for the FavorCOOL FC-SP-250 Macerator Sink Sewerage Pump:

Moc250 W
Tomtage/Częstotliwość110 V-120 V/60 Hz
Maksymalny udźwig pionowy26 stóp (7 metry)
Maximum Horizontal Lift262 stóp (70 metry)
Maksymalna szybkość przepływu100 L/Min (6000 L/H)
Prędkość silnika2800 obr./min.
Wymiary (dł. x szer. x wys.)11.2" x 5.1" x 8.6" (28.4 cm x 13 cm x 21.8 cm)
Wpusty3 x Ø 40mm universal wastewater inlets
Wylot1 x Outlet (23/28mm)
Automatic ON Level2.75" (7 cm)
Automatic OFF Level1.57" (4 cm)
Poziom hałasu30-40 dB
Odporność na wodęIPX7
TworzywoPolipropylen (PP)
FavorCOOL 250W Macerator Pump highlighting key performance metrics.

An image illustrating the FavorCOOL 250W Macerator Pump and its performance specifications, including noise level (30-40dB), vertical lift (22.9 ft), horizontal head (229 ft), and large flow rate (6,000 L/H).

FavorCOOL Macerator Pump emphasizing its IPX7 water resistance and odor-free operation.

Pokaz obrazuasing the FavorCOOL Macerator Pump's 'Green and Safe' features, including IPX7 water resistance and the activated carbon module for maintaining a fresh, odor-free environment.

5. Konfiguracja i instalacja

The FavorCOOL FC-SP-250 pump is designed for flexible installation in various residential settings where wastewater needs to be lifted to a drainage system. Its compact size allows for placement in shallow spaces, such as under basins.

5.1 Punkty połączeń

The pump features three Ø 40mm universal wastewater inlets and one outlet. These allow connection to multiple fixtures simultaneously, such as a sink, shower, bathtub, or laundry machine.

  • Wloty: Connect wastewater pipes from fixtures to the Ø 40mm inlets. Use the provided side inlet connect pipes and clamps dla bezpiecznych połączeń.
  • Wylot: Connect the discharge pipe to the pump's outlet. The included check valve in the discharge elbow assembly prevents backflow into the unit. Ensure the outlet pipe is securely fastened and routed to the main sewer system.
  • Air-vent / Carbon Filter: This component helps maintain an odor-free environment. Ensure it is properly installed and not obstructed.
  • Emergency Outlet: This is a safety feature. Consult a professional for proper connection if required for your specific installation.
Diagram of FavorCOOL Macerator Pump connection points and specifications.

A detailed diagram of the FavorCOOL Macerator Pump, labeling its outlet, air-vent/carbon filter, optional inlets, and emergency outlet, along with corresponding specifications for each connection.

5.2 Placement Examples

The compact design allows for versatile placement:

  • Under a washbasin
  • In a shower room
  • Pod zlewem kuchennym
  • Next to a laundry machine
FavorCOOL Macerator Pump installed in various household locations.

This image demonstrates the compact design of the FavorCOOL Macerator Pump, showing its versatile installation possibilities under a washbasin, in a shower room, under a kitchen sink, and next to a laundry machine.

6. Instrukcja obsługi

The FavorCOOL FC-SP-250 operates automatically once properly installed and connected to power.

  • Działanie automatyczne: The pump is equipped with a fully automatic ON/OFF switch system. It will automatically start pumping when the water level inside the unit reaches approximately 2.75 inches (7 cm).
  • Automatyczne wyłączanie: The pump will automatically shut down when the water level drops to approximately 1.57 inches (4 cm).
  • Cicha praca: The pump operates quietly, with a noise level between 30-40 dB, designed to minimize disturbance in your home environment.
  • Kontrola zapachu: The integrated replaceable activated carbon module helps ensure the pump remains odor-free, contributing to a fresh air environment.

7. Konserwacja

While the FavorCOOL FC-SP-250 is designed to be largely maintenance-free, periodic checks and simple cleaning can ensure optimal performance and longevity.

  • Regularna kontrola: Periodically inspect the pump and all connections for any signs of leaks, damage, or blockages.
  • Czyszczenie: The premium PP material outer shell is anti-aging, anti-scratch, and easy to clean. Wipe down the exterior with a damp szmatkę w razie potrzeby.
  • Activated Carbon Module: The activated carbon module is replaceable. Refer to the product packaging or contact customer service for replacement instructions and frequency.
  • Silnik: The motor is oil-filled for enhanced protection and does not require user maintenance.

8. Rozwiązywanie Problemów

If you encounter issues with your FavorCOOL FC-SP-250 pump, refer to the following common troubleshooting steps. For problems not listed here or if issues persist, contact customer service.

ProblemMożliwa przyczynaRozwiązanie
Pompa nie uruchamia sięNo power supply; Water level too low; Float switch malfunction; Motor issue.Check power connection and circuit breaker. Ensure water level reaches the automatic ON level. Inspect float switch for obstructions. Contact customer service if motor issue is suspected.
Pompa pracuje w sposób ciągłyFloat switch stuck; Check valve issue; Leak in discharge pipe.Check float switch for obstructions. Inspect check valve for proper function. Examine discharge pipes for leaks.
Low flow or no pumpingInlet/outlet blockage; Air lock; Pump overloaded.Inspect inlets and outlets for debris. Ensure proper venting. Verify only clear wastewater is being pumped.
Nietypowy hałas lub wibracjeForeign object in pump; Loose connections; Pump not level.Disconnect power and inspect for foreign objects (if safe to do so). Tighten all pipe connections. Ensure pump is placed on a stable, level surface.
Odor presentActivated carbon module needs replacement; Poor ventilation.Replace the activated carbon module. Ensure adequate ventilation around the pump.

9. Gwarancja i wsparcie

FavorCOOL is committed to providing high-quality products and customer satisfaction.

  • Gwarancja: This product comes with a 1-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
  • Certyfikaty: The FavorCOOL FC-SP-250 pump is proudly certified by GS & CE (TUV), ensuring it meets high safety and quality standards.
  • Obsługa klienta: For any questions, technical assistance, or warranty claims, please contact FavorCOOL customer service. We provide 7/24 customer support to address all your needs.

© 2023 FavorCOOL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.