VEVOR WX1320-1

VEVOR WX1320-1 1320lbs Wireless Electric Hoist User Manual

Model: WX1320-1

1. Wprowadzenie

This manual provides essential information for the safe and effective operation, installation, and maintenance of your VEVOR WX1320-1 1320lbs Wireless Electric Hoist. Please read all instructions carefully before use to ensure proper function and prevent injury or damage.

Główne cechy:

  • Bezprzewodowy pilot zdalnego sterowania: Operates up to 328 feet (100 meters) for enhanced safety and convenience. Includes an emergency stop button.
  • Dual Lifting Modes: Supports single-line lifting up to 660 lbs (39.4 ft height, 32 ft/min speed) and double-line lifting up to 1320 lbs (19.7 ft height, 16 ft/min speed).
  • Mocny silnik: Equipped with a 1150W motor and a large cooling fan to prevent overheating and ensure efficient operation.
  • Trwała konstrukcja: Features an anti-deformation steel frame, 19-strand thickened steel wire rope, and a high-strength metal hook for long-term reliability.
  • Łatwa instalacja: Designed for two-step hanging installation on ceilings or beams.
  • Dołączone akcesoria: Comes with a 13ft lifting sling strap and a 3.2ft shaft belt with metal ring.

2. Informacje dotyczące bezpieczeństwa

OSTRZEŻENIE: Nieprzestrzeganie tych instrukcji bezpieczeństwa może spowodować poważne obrażenia lub śmierć.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hard hat.
  • Ensure the hoist is securely mounted to a structure capable of supporting the maximum load capacity.
  • Nigdy nie przekraczaj znamionowego udźwigu wciągnika.
  • Inspect the hoist, wire rope, hooks, and slings for damage before each use. Do not use if any components are worn or damaged.
  • Keep hands and body clear of moving parts, especially the wire rope and hook.
  • Do not operate the hoist if the wire rope is twisted, kinked, or frayed.
  • Ensure the load is balanced and securely attached before lifting.
  • Avoid sudden starts or stops when lifting or lowering a load. Operate smoothly.
  • Do not use the hoist to lift people or loads over people.
  • Przed przystąpieniem do prac konserwacyjnych lub regulacyjnych należy odłączyć zasilanie.
  • Utrzymuj miejsce pracy wolne od przeszkód i zadbaj o odpowiednie oświetlenie.
  • The wireless remote control includes an emergency stop button. Familiarize yourself with its location and function.

3. Składniki produktu

The VEVOR WX1320-1 Electric Hoist package includes the following items:

  • 1 x Electric Hoist Unit
  • 1 x bezprzewodowy pilot zdalnego sterowania
  • 1 x 1m (3.2ft) Strap with Metal Ring
  • 1 x 4m (13ft) Strap
  • Uchwyty montażowe i sprzęt
  • Dual-line Pulley Hook (for double-line operation)
Image showing the VEVOR electric hoist with included accessories: a 13ft lifting sling and a 3.2ft metal lifting sling.

Figure 3.1: Hoist with included lifting slings.

4. Konfiguracja i instalacja

The VEVOR electric hoist is designed for straightforward hanging installation. Follow these steps carefully:

  1. Wybierz miejsce montażu: Select a sturdy ceiling or beam capable of safely supporting the hoist's weight and the maximum intended load. Ensure the mounting surface is level and free from obstructions.
  2. Zamocuj wsporniki montażowe: Use the provided mounting brackets and hardware to securely fasten the hoist to the chosen location. The installation typically involves two main steps: attaching the U-shaped brackets to the hoist and then securing them to the overhead structure. Ensure all bolts are tightened to the manufacturer's specifications.
Diagram illustrating the two-step hanging installation process for the electric hoist, showing U-shaped brackets and bolts.

Rysunek 4.1: Dwuetapowy proces montażu wiszącego.

  1. Podłącz zasilanie: Plug the hoist into a compatible 110V power outlet. Ensure the power source meets the hoist's electrical requirements.
  2. Funkcjonalność testu: Before lifting any loads, perform a test run with no load to ensure the hoist operates correctly, including the up/down functions and the emergency stop.

Film instruktażowy dotyczący rozpakowywania i początkowej konfiguracji:

Video 4.1: An unboxing and initial setup guide for the electric hoist, demonstrating how to prepare the unit for use.

5. Instrukcja obsługi

The VEVOR electric hoist offers two modes of operation: single-line and double-line lifting.

5.1. Praca jednoliniowa

For lighter loads, use the single-line configuration. The hoist will lift up to 660 lbs with a maximum height of 39.4 ft and a speed of 32 ft/min.

5.2. Praca w trybie dwuliniowym

For heavier loads, attach the pulley hook to create a double-line configuration. This mode allows lifting up to 1320 lbs, with a maximum height of 19.7 ft and a speed of 16 ft/min. The double-line setup effectively halves the lifting speed and height but doubles the capacity.

Diagram comparing single-line and dual-line lifting modes, showing different capacities, heights, and speeds.

Figure 5.1: Comparison of single-line and dual-line lifting modes.

5.3. Bezprzewodowy pilot zdalnego sterowania

The hoist is operated using a wireless remote control, providing a range of up to 328 feet. This allows for safe operation from a distance.

  • Przycisk W GÓRĘ: Press to raise the load.
  • Przycisk DÓŁ: Naciśnij, aby opuścić ładunek.
  • Przycisk zatrzymania awaryjnego: Press this red button immediately in case of an emergency or unexpected operation to cut power to the hoist.
Image showing a worker operating the electric hoist with a wireless remote control, highlighting the 328 ft range and safety features like emergency button, limit switch, anti-spin rope, and auto-brake.

Figure 5.2: Wireless remote control operation and safety features.

Always ensure a clear line of sight to the hoist and load during operation. Avoid operating the hoist in adverse weather conditions or environments that could interfere with the wireless signal.

6. Konserwacja

Regular maintenance ensures the longevity and safe operation of your VEVOR electric hoist.

  • Kontrola lin stalowych: Regularly check the steel wire rope for signs of wear, fraying, kinks, or corrosion. Replace the rope immediately if any damage is observed.
  • Kontrola haka i zatrzasku: Inspect the lifting hook and safety latch for deformation, cracks, or wear. Ensure the latch operates freely.
  • Motor and Cooling System: Keep the motor housing and cooling fan free from dust and debris to ensure proper heat dissipation.
  • Sprzęt montażowy: Periodically check all mounting bolts and connections to ensure they remain tight and secure.
  • Smarowanie: Consult a qualified technician for any lubrication requirements of internal components.
  • Czyszczenie: Clean the exterior of the hoist with a damp ściereczką. Nie używaj silnych środków chemicznych ani nie zanurzaj urządzenia w wodzie.

Always disconnect power to the hoist before performing any maintenance or cleaning.

7. Rozwiązywanie Problemów

If you encounter issues with your VEVOR electric hoist, refer to the following common troubleshooting steps:

ProblemMożliwa przyczynaRozwiązanie
Wciągnik nie działaBrak zasilania
Włączono zatrzymanie awaryjne
Niski poziom baterii pilota
Sprawdź połączenie zasilania i wyłącznik obwodu
Zwolnij przycisk zatrzymania awaryjnego
Wymień baterie w pilocie
Motor runs but hoist does not liftPrzeciążać
Wire rope jammed
Zmniejsz obciążenie do dopuszczalnej pojemności
Inspect wire rope for obstructions or damage
Hoist stops during operationAktywowana ochrona przed przegrzaniem
Limit switch engaged
Pozwól silnikowi ostygnąć
Check if load has reached upper or lower limit
Pilot nie odpowiadaPoza zasięgiem
Ingerencja
Problem z baterią
Move closer to the hoist
Reduce sources of interference
Wymień baterie w pilocie

If the problem persists after attempting these solutions, contact VEVOR customer support or a qualified technician.

8. Specyfikacje

Detailed technical specifications for the VEVOR WX1320-1 Electric Hoist:

FunkcjaSpecyfikacja
Numer modeluWX1320-1
Podwójny udźwig1320 funta / 600 kg
Udźwig pojedynczej liny660 funta / 300 kg
Single-line Lifting Height39.4 stóp / 12 m
Double-line Lifting Height19.7 stóp / 6 m
Single-line Lifting Speed32 stóp/min / 10 m/min
Double-line Lifting Speed16 stóp/min / 5 m/min
Moc silnika1150 W
Tomtage110 V~, 60 Hz
Znamionowa prędkość obrotowa2800 obr./min
Moment znamionowy3.9 Nm
Metoda kontroliWireless Remote Control (328 ft / 100 m range)
Wymiary produktu15.4 x 6 x 7 cala / 390 x 150 x 180 mm
Waga przedmiotu40.7 funta / 18.46 kg
TworzywoMetal
KolorCzerwony
Image displaying the VEVOR electric hoist with its dimensions and a list of product specifications and included accessories.

Rysunek 8.1: Wymiary i specyfikacje produktuview.

9. Gwarancja i wsparcie

Produkty VEVOR zostały zaprojektowane z myślą o trwałości i wydajności. Szczegółowe informacje dotyczące gwarancji można znaleźć w karcie gwarancyjnej dołączonej do produktu lub na oficjalnej stronie VEVOR. webZachowaj paragon jako dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.

For technical support, troubleshooting assistance, or parts inquiries, please contact VEVOR customer service through their official channels. Provide your product model number (WX1320-1) and purchase date for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.