ACASIS M.2 NVMe SSD Cloner User Manual

Wstęp

Dziękujemy za zakupasing the ACASIS M.2 NVMe SSD Cloner. This dual-bay device is designed to provide a convenient and efficient solution for cloning M.2 NVMe Solid State Drives offline, as well as for online data transfer. With its built-in cooling fan and robust aluminum construction, it ensures stable and reliable performance while protecting your valuable data.

Przed użyciem produktu należy dokładnie przeczytać tę instrukcję, aby zapewnić jego prawidłowe działanie i wydłużyć jego żywotność.

Informacje dotyczące bezpieczeństwa

• Trzymaj urządzenie z dala od wody, wilgoci i ekstremalnych temperatur.
• Nie należy podejmować prób demontażu ani modyfikacji urządzenia. Spowoduje to unieważnienie gwarancji i może spowodować uszkodzenia.
• Używaj wyłącznie dostarczonego zasilacza i kabli.
• Podczas pracy należy zapewnić odpowiednią wentylację, aby zapobiec przegrzaniu.
• Always back up important data before performing any cloning or data transfer operations.
• This device is designed for M.2 NVMe SSDs only. It is not compatible with SATA M.2 SSDs.

Zawartość opakowania

Sprawdź zawartość paczki, aby upewnić się, że znajdują się w niej wszystkie elementy:

• ACASIS M.2 NVMe SSD Cloner (EC-6604)
• Zasilacz
• USB-C to USB-C/USB-A Cable
• Instrukcja obsługi

Produkt ponadview

Familiarize yourself with the components and indicators of the ACASIS M.2 NVMe SSD Cloner:

This image illustrates the key components of the ACASIS M.2 NVMe SSD Cloner, including the Source (A) and Target (B) slots, Power button, Clone button, and progress indicator lights.

• Source Slot (A): Insert the SSD containing the data you wish to clone.
• Target Slot (B): Insert the SSD where the cloned data will be written. The target SSD must be equal to or larger in capacity than the source SSD.
• Przycisk zasilania: Włącza/wyłącza urządzenie.
• Przycisk klonowania: Rozpoczyna proces klonowania offline.
• Wskaźniki postępu (25%, 50%, 75%, 100%): Show the cloning progress.
• Source/Target Indicators: Light up when SSDs are properly inserted.
• Port USB-C: For connecting to a computer for online data transfer.
• Port DC 5 V: Do podłączenia zasilacza.

Organizować coś

Wykonaj poniższe kroki w celu wstępnej konfiguracji:

1. Podłącz zasilanie: Plug the provided power adapter into the DC 5V port on the cloner and then into a wall outlet.
2. Otwórz pokrywy: Press the open buttons on the sides of the cloner to release the top lids, revealing the SSD slots.
3. Insert SSDs: Gently insert your M.2 NVMe SSDs into the designated slots. Ensure they are fully seated. For offline cloning, insert the source SSD into Slot A and the target SSD into Slot B. For online data transfer, you can insert one or two SSDs as needed.
4. Zamknij pokrywy: Close the top lids until they click securely into place.
5. Connect to Computer (Optional for Online Transfer): If you plan to use the device for online data transfer, connect the cloner to your computer using the provided USB-C cable.

This image illustrates the four steps for installing SSDs into the ACASIS M.2 NVMe SSD Cloner, from opening the device to inserting the drives and connecting the cable.

Instrukcja obsługi

Klonowanie offline

Offline cloning allows you to duplicate an SSD without connecting the cloner to a computer. The target SSD must have a capacity equal to or greater than the source SSD.

1. Przygotuj dyski SSD: Ensure the source SSD is inserted into Slot A and the target SSD into Slot B. Important: All data on the target SSD will be erased during the cloning process. Please back up any important data from the target SSD before proceeding.
2. Włączanie: Press the Power button on the cloner. The Power indicator light will illuminate.
3. Rozpocznij klonowanie: Press and hold the Clone button for approximately 5 seconds until the progress indicator lights (25%, 50%, 75%, 100%) begin to flash sequentially. This indicates the cloning process has started.
4. Monitoruj postęp: The indicator lights will show the cloning progress. Each light will turn solid as that percentage of the cloning is completed.
5. Klonowanie zakończone: Once the 100% indicator light remains solid (no longer flashing), the cloning process is complete.
6. Wyłączone: Press and hold the Power button until the device turns off. You can now safely remove the SSDs.

This image demonstrates the one-click offline cloning function, highlighting the clone button and the SSDs in their respective slots.

Notatka: For Windows users, after cloning to a larger drive, you may need to extend the partition in Disk Management to utilize the full capacity of the new SSD. SteamOS typically handles this automatically.

Online Data Transfer

The cloner can also function as a dual-bay M.2 NVMe enclosure for online data transfer when connected to a computer.

1. Połącz z komputerem: Ensure the cloner is powered on and connected to your computer via the USB-C cable.
2. Insert SSDs: Insert one or two M.2 NVMe SSDs into the slots. The cloner will be recognized as external drives by your operating system.
3. Transfer danych: You can now access and transfer files to and from the inserted SSDs as you would with any external storage device.

This image shows the ACASIS M.2 NVMe SSD Cloner connected to a laptop, illustrating its use for high-speed online data transfer via its USB 3.2 interface.

The device supports data transfer speeds up to 10Gbps, with tested read speeds of approximately 924MB/s and write speeds of 1052MB/s (actual speeds may vary based on SSD and system configuration).

Konserwacja

To ensure the longevity and optimal performance of your ACASIS M.2 NVMe SSD Cloner, follow these maintenance guidelines:

• Czyszczenie: Do czyszczenia zewnętrznej części urządzenia należy używać miękkiej, suchej ściereczki. Nie należy używać płynnych środków czyszczących ani aerozoli.
• Wentylator chłodzący: The built-in cooling fan helps maintain optimal operating temperatures. Ensure the fan vents are not obstructed. The fan automatically activates during intensive operations like cloning.

This image highlights the upgraded built-in cooling fan and its effectiveness in maintaining lower operating temperatures compared to devices without active cooling.

Rozwiązywanie problemów

If you encounter issues with your ACASIS M.2 NVMe SSD Cloner, refer to the following common problems and solutions:

Specyfikacje

This image details the compatibility of the cloner with different M.2 NVMe SSD sizes (2230, 2242, 2260, 2280) and M-Key/M&B-Key NVMe/PCIe interfaces.

Gwarancja i wsparcie

ACASIS products come with a standard warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official ACASIS webstrona.

If you have any questions, require technical assistance, or need to report an issue, please contact our customer support team:

• E-mail: wsparcie@acasis.com
• Godziny otwarcia: 7x24 hours online service anytime

We are committed to providing high-quality service and support to ensure your satisfaction.