WAMPAT TV Stand & End Tables Instruction Manual

1. Wprowadzenie

This manual provides detailed instructions for the assembly, operation, and maintenance of your WAMPAT 3-Piece Living Room Table Set. This set includes a 47.2" Dresser TV Stand with 6 drawers and two End Tables, each with 2 drawers and a charging station. Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality.

2. Ważne informacje dotyczące bezpieczeństwa

• Includes anti-tipping kit. Always secure the furniture to the wall using the provided anti-tipping kit to prevent serious injury from tip-over.
• Do not overload tables beyond 176 lbs. Exceeding this weight limit may cause structural damage or collapse.
• Keep electrical components (charging station) away from water or damp środowiskach, aby zapobiec porażeniu prądem.
• Follow assembly instructions precisely for safe and stable setup. Incorrect assembly can lead to instability.
• Keep away from children. Small parts and potential tip-over hazards require careful placement and supervision.
• Przed użyciem należy upewnić się, że wszystkie śruby i elementy mocujące są mocno dokręcone i okresowo sprawdzać ich dokręcenie.

3. Zawartość opakowania

Your WAMPAT 3-Piece Living Room Table Set is shipped in 3 separate packages. Please verify that all components listed below are present before beginning assembly.

Elementy stojaka pod telewizor:

• All necessary panels for the TV stand structure.
• 6 sets of drawer slides.
• Hardware: cam bolts, dowels, screws, cam locks.
• Wooden legs and skid pads.
• Anti-tipping kit.

End Table Components (x2):

• All necessary panels for each end table structure.
• 2 sets of drawer slides per table.
• Charging station with 2 Standard Plug Outlets and 2 USB Ports per table.
• Hardware: cam bolts, dowels, screws, cam locks.
• Wooden legs and skid pads.

Each table comes with clear, illustrated instructions for easy assembly.

4. Instrukcja montażu

Please refer to the detailed assembly video and follow the step-by-step instructions provided. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches.

4.1. WAMPAT 6-Drawer Dresser Assembly Guide Video

This video provides a comprehensive assembly guide for the WAMPAT 6-Drawer Dresser (TV Stand). It covers all steps from unboxing to final drawer installation.

4.2. Wskazówki dotyczące ogólnego zgromadzenia

• Identify all parts and hardware before starting. Each part and screw is coded for easy identification.
• Use a screwdriver for cam bolts and screws. Do not overtighten to avoid damaging the wood.
• For drawer slides, separate the slide bracket from the slide arm as per the diagram in the video (around 0:17). Ensure the slide bracket is correctly separated and re-assembled onto the slide arm. Check for any obstructions in the drawer slides.
• When inserting dowels, ensure they are fully seated into the pre-drilled holes.
• Carefully slide back panels into place along the grooves at the back of the assembly.
• If a drawer does not go in smoothly, press or lift the plastic release lever on the drawer slide, pull out the slider bracket from the slider arm, and re-assemble until they are going in smoothly.

5. Instrukcja obsługi

5.1. Użytkowanie stojaka pod telewizor

The TV stand is designed to support flat screen televisions up to 55 inches wide, with a maximum weight limit of 176 lbs. The six drawers provide ample storage for media accessories, remote controls, and other living room essentials. Ensure the TV is centered and stable on the top surface.

5.2. End Table Charging Station

Each end table is equipped with a built-in charging station featuring 2 standard plug outlets and 2 USB ports. To use, simply plug the end table's power cord into a wall outlet. You can then connect your phones, lamps, and other electronic devices directly to the charging station for convenient power access.

6. Konserwacja

To maintain the appearance and longevity of your WAMPAT furniture, follow these simple care instructions:

• Czyszczenie: Wipe surfaces with a dry cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the faux linen-textured finish.
• Wycieki: Natychmiast wytrzyj rozlany płyn czystą, suchą szmatką.
• Światło słoneczne: Aby zapobiec blaknięciu, należy unikać długotrwałego wystawiania na bezpośrednie działanie promieni słonecznych.
• Ciepło: Nie kładź gorących przedmiotów bezpośrednio na powierzchni. Używaj podstawek lub podkładek ochronnych.
• Elementy elektryczne: Periodically check the charging station for any signs of wear or damage. Ensure the power cord is not pinched or frayed.

7. Specyfikacje

8. Rozwiązywanie Problemów

• Chwiejne meble: Ensure all cam locks and screws are fully tightened. Check that the furniture is placed on a level surface. Adjust the anti-tipping kit if necessary.
• Szuflady nie wysuwają się płynnie: Refer to the "Slider bracket" and "Slider arm" diagram in the assembly video (around 6:32). Ensure the slider bracket is correctly separated and re-assembled onto the slider arm. Check for any obstructions in the drawer slides.
• Stacja ładowania nie działa: Verify that the end table's power cord is securely plugged into a functional wall outlet. Check if the wall outlet itself is receiving power.

9. Gwarancja i wsparcie

For warranty information, replacement parts, or further assistance, please contact WAMPAT customer support. Keep your purchase receipt and model number handy for quicker service.

Visit the official WAMPAT Store for more products and support: WAMPAT Store