ToughBuilt 9-inch Lighted Magnetic Box Level

1. Informacje dotyczące bezpieczeństwa

Read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or damage to the product.

• Always wear appropriate personal protective equipment (PPE) when working with tools.
• Keep the level clean and free from debris to ensure accurate readings.
• Do not expose the level to extreme temperatures or corrosive materials.
• Store the level in a dry, secure location when not in use.
• Przechowuj baterie poza zasięgiem dzieci. Baterie utylizuj zgodnie z lokalnymi przepisami.

2. Koniec produktuview

The ToughBuilt 9-inch Lighted Magnetic Box Level is engineered for precision and durability in various work environments. Its compact design and advanced features make it suitable for professional and DIY applications.

Przód view of the ToughBuilt 9-inch Lighted Magnetic Box Level, showcasing its robust design and illuminated vials.

Główne cechy:

• Precision Milled: Ensures high accuracy for critical leveling tasks.
• LED-Lit Vials: Zapewnia lepszą widoczność w warunkach słabego oświetlenia.
• Inset Vials: Designed for increased protection against impacts.
• Powerful Rare Earth Magnets: Offers strong, secure hold on metal surfaces.
• Intuitive LED Operation: Simple button press for ease of use.
• Shock-Absorbing Endcaps: Provides added impact protection and durability.

An annotated diagram highlighting key features of the level, including precision-milled construction, LED-lit vials, inset vials, powerful rare earth magnets, intuitive LED operation, and shock-absorbing endcaps.

3. Konfiguracja

Montaż baterii:

The ToughBuilt 9-inch Lighted Magnetic Box Level requires 2 AAA batteries (included) to power the LED-lit vials. To install or replace batteries:

1. Locate the battery compartment cover, typically on the side or back of the level.
2. Use a small screwdriver or coin to open the compartment cover.
3. Włóż dwie baterie AAA, zwracając uwagę na prawidłową biegunowość (+/-), zgodnie ze wskazaniami wewnątrz komory.
4. Dokładnie zamknij pokrywę komory baterii.

4. Instrukcja obsługi

Basic Leveling:

To check for level or plumb:

1. Place the level firmly against the surface you wish to check.
2. For horizontal (level) surfaces, observe the bubble in the horizontal vial. The surface is level when the bubble is centered between the two indicator lines.
3. For vertical (plumb) surfaces, observe the bubble in the vertical vial. The surface is plumb when the bubble is centered between the two indicator lines.

A person wearing safety glasses and gloves uses the ToughBuilt 9-inch Box Level to check the vertical alignment of a wooden stud.

Korzystanie ze światła LED:

The integrated LED lights enhance visibility of the vials in dim lighting conditions.

1. Locate the power button on the side of the level.
2. Press the button once to activate the LED lights for the vials.
3. The lights will automatically shut off after approximately 3 minutes to conserve battery life.
4. To manually turn off the lights, press the power button again.

A finger pressing the orange LED light activation button located on the side of the ToughBuilt 9-inch Box Level.

Funkcja magnetyczna:

The powerful rare earth magnets allow the level to securely attach to ferrous metal surfaces, providing hands-free operation. Simply place the magnetic edge of the level onto the metal surface.

5. Konserwacja

Czyszczenie:

To maintain accuracy and extend the life of your level:

• Wytrzyj poziom do czysta miękką szmatką.amp ściereczkę po każdym użyciu.
• Do not use abrasive cleaners or solvents, as these can damage the vials or the level's finish.
• Ensure the vials are clear of dirt and debris for unobstructed viewing.

Składowanie:

Store the level in a dry environment, away from direct sunlight and extreme temperatures. Protect it from impacts that could affect its calibration.

Wymiana baterii:

Replace batteries when the LED lights dim or fail to illuminate. Refer to the 'Battery Installation' section for detailed steps.

6. Rozwiązywanie Problemów

Typowe problemy:

• Światła LED nie działają: Sprawdź instalację baterii i upewnij się, że nie są rozładowane. W razie potrzeby wymień je.
• Niedokładne odczyty: Ensure the level is clean and free of debris. Verify that the surface being measured is stable. If persistent inaccuracy occurs, the level may require professional calibration.
• Level not adhering magnetically: Ensure the surface is ferrous metal and clean. Magnets may not hold on painted or coated surfaces as effectively.

7. Specyfikacje

A detailed technical drawing of the ToughBuilt 9-inch Box Level, showing its length (9.49 inches / 24.1 cm), width (2.01 inches / 5.1 cm), and thickness (1.06 inches / 2.7 cm).

8. Gwarancja i wsparcie

ToughBuilt products are manufactured to high standards and are designed for durability. For information regarding warranty coverage, product registration, or technical support, please visit the official ToughBuilt webOdwiedź stronę internetową lub skontaktuj się z działem obsługi klienta. Zachowaj paragon jako dowód zakupu.

For further assistance, please refer to the contact information provided with your product packaging or on the manufacturer's webstrona.