EVGATSAUTO USB Heated Vest User Manual

1. Wprowadzenie

Thank you for choosing the EVGATSAUTO USB Heated Vest. This vest is designed to provide warmth and comfort in cold weather conditions, utilizing carbon fiber heating elements to deliver consistent heat to key body areas. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

2. Informacje dotyczące bezpieczeństwa

Aby zapobiec obrażeniom ciała lub uszkodzeniu produktu, zawsze należy przestrzegać poniższych wskazówek bezpieczeństwa:

• Do not use the vest if it is wet or damp.
• Do not use the vest if the heating elements or wiring appear damaged.
• Nie należy używać kamizelki podczas snu.
• Do not use the vest with infants, children, or individuals who are unable to operate the controls or understand the instructions.
• Przed użyciem skonsultuj się z lekarzem, jeśli cierpisz na jakąś chorobę, jesteś w ciąży lub masz rozrusznik serca.
• Always disconnect the power bank before cleaning or storing the vest.
• Do not modify the vest or its heating system.
• Use only power banks with a USB output of 2A or 2.4A.

3. Koniec produktuview

The EVGATSAUTO Heated Vest is designed for comfort and warmth, featuring a lightweight, quilted design and carbon fiber heating units.

Główne cechy:

• Carbon Fiber Heating Unit: Generates consistent heat for 6 core body parts: neck, back, abdomen, and waist.
• 3 poziomów grzania: Adjustable heat settings (Low, Medium, High) for personalized comfort.
• Zasilanie USB: Compatible with 10000mAh power banks (not included) with 2A or 2.4A USB output.
• Wygodny projekt: Quilted, lightweight, and fine lining for unrestricted movement. Features a zipper closure.

4. Konfiguracja

Before using your heated vest, follow these steps:

1. Naładuj Power Bank: Ensure your 10000mAh power bank (not included) is fully charged.
2. Znajdź kabel USB: Find the USB cable located inside the vest's pocket.
3. Podłącz Power Bank: Connect the USB cable from the vest to the output port of your charged power bank.
4. Secure Power Bank: Place the power bank securely in the designated pocket.

The vest is now ready for operation.

5. Instrukcja obsługi

Follow these steps to operate your heated vest:

1. Włączanie: Press and hold the power button (usually located on the chest area) for 3-5 seconds until the indicator light illuminates. The vest will typically start on the high heat setting (red light).
2. Dostosuj poziom ciepła: Briefly press the power button to cycle through the heating levels:
   • Wysoki (czerwone światło): Provides maximum heat. (Approx. 3 hours with 10000mAh battery)
   • Średnie (białe światło): Provides moderate heat. (Approx. 5 hours with 10000mAh battery)
   • Niskie (niebieskie światło): Provides gentle heat. (Approx. 7 hours with 10000mAh battery)
3. Wyłączone: Press and hold the power button again for 3-5 seconds until the indicator light turns off. Disconnect the power bank when not in use.

6. Konserwacja

Proper care will extend the life of your heated vest:

• Odłącz zasilanie: Always disconnect the power bank before cleaning.
• Mycie: Hand wash or machine wash the heated vest in a laundry bag. Use cold water and a mild detergent.
• Wysuszenie: Do not wring. Place the vest in a well-ventilated area to air dry completely before storage or next use.
• Nie: Do not bleach, iron, or dry clean the vest.
• Składowanie: Store the vest in a cool, dry place when not in use.

7. Rozwiązywanie Problemów

If you encounter issues with your heated vest, refer to the following common problems and solutions:

8. Specyfikacje

9. Gwarancja i pomoc techniczna

For warranty information or technical support, please contact EVGATSAUTO customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.