Tefola 1000W 36V/48V Brushless Motor Controller Kit User Manual

1. Wprowadzenie

Thank you for choosing the Tefola 1000W 36V/48V Brushless Motor Controller Kit. This kit provides stable speed control and sensitive braking for your electric bike or scooter. It features a durable aluminum alloy controller housing for efficient heat dissipation and an LCD display for clear riding data. Please read this manual carefully before installation and operation to ensure proper use and safety.

2. Informacje dotyczące bezpieczeństwa

• Always wear appropriate safety gear when operating electric bikes or scooters.
• Ensure all connections are secure and properly insulated before powering on the system.
• Do not attempt to modify the controller or any components, as this may void the warranty and create safety hazards.
• Keep the controller and display away from water and extreme temperatures.
• Regularly inspect all wiring for damage or loose connections.

3. Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie elementy wymienione poniżej:

• 1 x sterownik silnika
• 1 x Throttle with LCD Display Panel
• 1 x Throttle Handle Grip
• 2 x Keys (for throttle lock)
• 1 x Instrukcja obsługi (ten dokument)

Image: Complete contents of the Tefola Motor Controller Kit.

4. Specyfikacje

5. Konfiguracja i instalacja

This section outlines the general steps for installing the motor controller kit. Professional installation is recommended if you are unfamiliar with electric bike/scooter wiring.

5.1 Umiejscowienie kontrolera

Mount the controller in a secure location on your electric bike or scooter, ensuring it is protected from direct impact and moisture. The fluted aluminum housing is designed for heat dissipation, so ensure adequate airflow around it.

5.2 Throttle and Handlebar Installation

1. Remove your existing throttle and handle grip from the handlebar.
2. Slide the new throttle with LCD display onto the right side of the handlebar. Ensure it fits securely on 22.5mm diameter handlebars.
3. Install the additional handle grip on the left side of the handlebar.
4. Secure both components firmly to prevent rotation during use.

Image: Throttle with LCD display and handle grip for handlebar installation.

5.3 połączeń przewodów

The controller has multiple color-coded wires for various functions. Connect them according to your electric bike/scooter's wiring diagram. Common connections include:

• Przewody zasilające: Connect to the battery (usually thicker red for positive, black for negative).
• Przewody silnika: Connect to the motor (typically three phase wires and five Hall sensor wires). Match colors carefully.
• Przewody przepustnicy: Connect to the throttle unit.
• Przewody hamulcowe: Connect to brake levers (often with cut-off function).
• LCD Display Wires: Connect to the display unit.
• Other Wires: May include wires for lights, pedal assist sensor (PAS), speed sensor, etc. Refer to your vehicle's specific wiring diagram for these.

Image: Motor controller with its array of connection wires.

Ważny: Ensure all connections are correct and secure before applying power. Incorrect wiring can damage the components.

6. Instrukcja obsługi

6.1 Włączanie/wyłączanie

Insert the key into the throttle's lock mechanism and turn it to the 'ON' position to power on the system. The LCD display will illuminate. Turn the key to 'OFF' to power down.

6.2 Funkcje wyświetlacza LCD

The LCD display provides real-time riding data. The backlight ensures visibility in various lighting conditions. Use the 'M' button to cycle through display modes or adjust settings.

Image: LCD display showing current speed, battery level, and mileage.

Na wyświetlaczu zazwyczaj wyświetlane są następujące informacje:

• Prędkość w czasie rzeczywistym: Aktualna prędkość jazdy.
• Poziom naładowania baterii: Wskaźnik poziomu naładowania akumulatora.
• Tomtage: Aktualna pojemność bateriitage.
• Single Run Mileage: Distance covered in the current trip.
• Całkowity przebieg: Cumulative distance covered by the vehicle.
• Gear Indication: Current assist level or gear.
• Alert niskiego poziomu baterii: Visual warning when battery is low.
• Ikona usterki: Indicates system errors (refer to troubleshooting for details).

6.3 Działanie przepustnicy

Gently twist the throttle grip to engage the motor and control speed. The brushless motor controller provides sensitive and stable speed control. Release the throttle to reduce speed or apply brakes.

6.4 Funkcja blokady klawiszy

The integrated key lock on the throttle acts as a power switch, preventing unauthorized use of your electric bike or scooter when turned to the 'OFF' position and the key is removed.

7. Konserwacja

Regular maintenance ensures the longevity and optimal performance of your motor controller kit.

• Czyszczenie: Wipe the controller and LCD display with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
• Kontrola połączenia: Periodically inspect all electrical connections for tightness and signs of corrosion or damage. Re-secure any loose connections.
• Obudowa kontrolera: Ensure the controller's aluminum housing remains free of obstructions to allow for proper heat dissipation.
• Kontrola okablowania: Check all wires for fraying, cuts, or pinches. Repair or replace damaged wiring immediately.

8. Rozwiązywanie Problemów

Jeśli napotkasz problemy, zapoznaj się z poniższymi typowymi problemami i rozwiązaniami:

If you cannot resolve the issue using the troubleshooting guide, please contact customer support.

9. Gwarancja i wsparcie

For warranty information, please refer to the purchase documentation or contact your retailer. If you require technical assistance or have questions about your Tefola Motor Controller Kit, please visit the Tefola Store on Amazon lub skontaktuj się z obsługą klienta za pośrednictwem swojej platformy zakupowej.