1. Wprowadzenie
Thank you for choosing the ALITOVE COB LED Light Strip. This manual provides detailed instructions for the safe and efficient use of your new LED light strip. Please read this manual thoroughly before installation and operation, and retain it for future reference.
This 16.4ft (5-meter) COB LED strip delivers a super bright, dotless, and uniform daylight white illumination at 6000K. It features high color rendering (CRI>90), dimmable functionality, and easy installation with strong adhesive backing. Designed for indoor lighting applications, it is safe, energy-efficient, and durable.
2. Funkcje produktu
- Dotless and Uniform Luminous Effect: Advanced COB integrated packaging technology with 320 LEDs per meter provides smooth, continuous illumination without visible breaks or glare. The diffusion layer ensures soft, eye-friendly light.
- Ultra Bright and Dimmable: Closely packed LED units offer exceptional brightness. The multi-directional RF Remote Control allows 10-100% brightness adjustment and selection from 3 dynamic modes. Features last power-on setting memory. Control range up to 20 meters.
- Easy Installation and Wide Applications: Strong self-adhesive tape for effortless installation on clean, dry, flat surfaces. The strip can be cut along designated marks for DIY projects. Suitable for bedrooms, kitchens, under cabinets, stairs, clubs, stores, ceilings, and mirrors.
- Energy Efficient and Durable: Utilizes a real double-layer FPCB for excellent heat dissipation. Consumes approximately 7W per meter. LED units are covered with a high-quality silicone diffuser for dustproof protection, contributing to an impressive lifespan of over 55,000 hours.
- Bezpieczne i niezawodne: Powered by a 12V low voltage power adapter with built-in short circuit prevention technology. Emits extremely low heat, making it safe and touchable.
3. Co znajduje się w pudełku
Sprawdź, czy w opakowaniu znajdują się wszystkie komponenty:
- 16.4ft (5-meter) COB LED Strip Light
- Zasilacz 12 V 3 A
- RF Remote Control Dimmer (with 1 CR2032 battery included)
- Złącze przewodu dwustronnego
- LED Strip Fixed Clip
Image: Complete kit contents, showing the coiled LED strip, power adapter, RF remote control, and various connectors.
4. Specyfikacje
| Atrybut | Wartość |
|---|---|
| Marka | ALITOVE |
| Numer modelu | 12V-5M-COB252-CW-Kit-NP |
| Typ źródła światła | Dioda LED (COB) |
| Kolor światła | Daylight White (Cold White) |
| Temperatura barwowa | 6000 kelwinów |
| Wskaźnik oddawania barw (CRI) | 90.00 |
| Tomtage | 12 V (prąd stały) |
| Cotage | 35 watts (approx. 7W per meter) |
| Liczba źródeł światła | 1600 LEDs (320 LEDs per meter) |
| Długość | 16.4 stóp (5 m) |
| Cechy specjalne | Dimmable, Flexible, Cuttable, Dotless |
| Zastosowanie wewnątrz/na zewnątrz | Wnętrz |
| Tworzywo | Silikon |
| Metoda kontroli | Pilot zdalnego sterowania (RF) |
| Średnie życie | 55,000 godzin |
| Poziom wodoodporności | Nie jest wodoodporny |
5. Informacje dotyczące bezpieczeństwa
- This product is designed for 12V DC power only. Do not connect to higher voltagźródła zasilania.
- Ensure the power adapter is suitable for the local voltage i częstotliwość.
- Do not immerse the LED strip or any components in water, as it is not water resistant.
- Avoid bending the strip sharply or applying excessive force, which may damage the internal circuitry.
- Do not cover the LED strip with flammable materials when in operation to prevent heat buildup.
- Keep out of reach of small children and pets during installation to prevent accidental ingestion of small parts.
- Disconnect power before any installation, cutting, or maintenance.
6. Konfiguracja i instalacja
The ALITOVE COB LED Light Strip is designed for easy plug-and-play installation. Follow these steps for optimal performance:
- Przygotuj powierzchnię: Ensure the installation surface is clean, dry, and smooth. Dust, dirt, or moisture can compromise the adhesive's effectiveness.
- Zmierz i tnij (jeśli to konieczne): If a shorter length is required, the LED strip can be cut along the designated cutting marks (indicated by copper pads and a scissor icon) every 2.5cm (0.98in). Cut only at these marks to avoid damaging the circuit.
- Połącz komponenty:
- Connect the LED strip to the RF Remote Control Dimmer.
- Connect the RF Remote Control Dimmer to the 12V 3A Power Adapter.
- For extending or connecting multiple strips, use the provided Two Ends Wire Connectors.
- Przyklej pasek: Peel off the protective backing from the strong self-adhesive tape on the back of the LED strip. Carefully press the strip onto the prepared surface, ensuring firm contact along its entire length.
- Zabezpiecz za pomocą klipsów (opcjonalnie): For added security, especially on vertical surfaces or in high-traffic areas, use the included LED Strip Fixed Clips at regular intervals.
- Power Injection (for long runs): When connecting two light strips or for very long runs, the two bare wires at the end of the LED light strip are used to inject power. This helps to prevent voltage drop and maintain consistent brightness along the entire length.
- Włączać do kontaktu: Once all connections are secure and the strip is mounted, plug the 12V 3A Power Adapter into a standard electrical outlet.
Image: Connection diagram for the ALITOVE COB LED Light Strip kit, illustrating the power adapter, receiving controller, RF LED remote, and flexible COB LED strip with power injection wires.
Image: Features of the LED strip including its flexibility, adhesive backing, designated cutting points, and various connector types.
7. Instrukcja obsługi
Control your ALITOVE COB LED Light Strip using the included RF Remote Control Dimmer:
- Włączanie/wyłączanie: Naciśnij Moc przycisk do włączania i wyłączania świateł.
- Regulacja jasności: Użyj Zwiększenie jasności I Zmniejszona jasność przyciski umożliwiające regulację natężenia światła od 10% do 100%.
- Tryby dynamiczne: Select from 3 pre-programmed dynamic modes using the dedicated mode buttons on the remote. These modes offer various lighting effects.
- Funkcja pamięci: The system will remember your last power-on brightness and mode settings when turned off and on again.
Image: Visual representation of the light strip's features, including dimmable brightness from 10% to 100% and remote control functions like On/Off, dynamic modes, and user setting saving.
8. Konserwacja
The ALITOVE COB LED Light Strip requires minimal maintenance to ensure its longevity and performance:
- Czyszczenie: Gently wipe the surface of the LED strip with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents. Ensure the strip is unplugged before cleaning.
- Ochrona przed kurzem: The silicone diffuser provides dustproof protection. However, regular cleaning helps maintain optimal light output.
- Kontrola kleju: Periodically check the adhesive backing to ensure the strip remains firmly attached to the surface. Re-secure with clips if necessary.
- Składowanie: If storing the strip, ensure it is coiled loosely and kept in a dry, cool place away from direct sunlight.
9. Rozwiązywanie Problemów
If you encounter issues with your ALITOVE COB LED Light Strip, refer to the following common problems and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Listwa świetlna nie włącza się. | Brak zasilania, luźne połączenie, rozładowana bateria pilota. | Check power adapter connection to outlet and strip. Ensure all connectors are securely fastened. Replace CR2032 battery in remote. |
| Lights are dim or inconsistent along the strip. | Tomtage drop, insufficient power. | For longer runs or multiple connected strips, ensure power injection wires are used at the end of the strip to compensate for voltage drop. Verify the power adapter is correctly rated for the total length. |
| Pilot nie działa. | Rozładowana bateria, przeszkoda, poza zasięgiem. | Replace the CR2032 battery. Ensure no obstructions between remote and receiver. Operate within the 20-meter range. |
| Adhesive is not sticking well. | Surface is dirty, dusty, or uneven. | Clean and dry the installation surface thoroughly before applying. For better adhesion, use the included fixed clips. |
| Light color appears incorrect or different from expected. | Product variant mismatch, external lighting interference. | Verify the product received matches the intended color (Daylight White 6000K). Ensure no other light sources are affecting the perceived color. |
| Strip feels hot. | Improper ventilation, incorrect power supply. | While designed for low heat, ensure the strip is not covered or installed in an enclosed space without airflow. Verify you are using the correct 12V 3A power adapter. |
10. Gwarancja i wsparcie
ALITOVE zapewnia 12-miesięczna gwarancja for this product, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.
For technical support, warranty claims, or any questions regarding your ALITOVE COB LED Light Strip, please contact ALITOVE customer service through the retailer's platform or visit the official ALITOVE store page on Amazon. ALITOVE is a professional manufacturer of LED lighting and control systems, committed to customer satisfaction.
Więcej informacji znajdziesz na stronie ALITOVE Store.