FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk User Manual

1. Wprowadzenie

This manual provides essential instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT QS2L Dual Motor L-Shaped Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation of your new desk.

Image 1.1: The FLEXISPOT QS2L L-Shaped Standing Desk in a typical office setup, showcasing its spacious desktop and dual monitor capacity.

2. Instrukcje bezpieczeństwa

• Przed użyciem biurka należy sprawdzić, czy wszystkie połączenia są solidne.
• Podczas pracy urządzenia należy trzymać dzieci i zwierzęta z dala od biurka.
• Do not place hands or other objects near moving parts of the desk frame.
• The desk does nie feature an emergency stop function. If an obstacle is encountered during height adjustment, the desk will continue to move, potentially causing damage to the motor or objects. Always ensure the path of movement is clear.
• Nie przeciążaj biurka. Zapoznaj się ze specyfikacją, aby poznać maksymalny udźwig.
• Only use the provided power adapter and control panel.
• If any unusual noise or movement occurs, discontinue use and consult the troubleshooting section.

3. Zawartość opakowania

Przed rozpoczęciem montażu należy sprawdzić, czy wszystkie elementy są obecne:

• L-Shaped Desktop (Splice Board)
• 4-Leg Desk Frame Components (Legs, Crossbars, Feet)
• Podwójny system silnikowy
• Panel sterowania z wyświetlaczem LED
• Zasilacz i kabel
• Hardware Kit (Screws, Allen Wrenches)
• Taca do zarządzania kablami

4. Instalacja i montaż

Assembly typically requires two people for ease and safety. The desk utilizes primarily two types of screws for most connections.

4.1 Pierwsze kroki

1. Rozpakuj wszystkie elementy i rozłóż je na czystej, miękkiej powierzchni, aby zapobiec zarysowaniom.
2. Identify and remove any screws used for shipping purposes that secure frame components together. These screws are not part of the final assembly and must be removed to allow proper component separation.

4.2 Montaż ramy

1. Assemble the leg columns to the crossbars, ensuring all connections are firm.
2. Przymocuj stopy do dolnej części każdej kolumny nóg.
3. Connect the motor cables to the control box, ensuring they are securely plugged in.

4.3 Załącznik na pulpicie

1. Carefully place the assembled desk frame onto the underside of the L-shaped desktop.
2. Align the pre-drilled holes in the desktop with the mounting points on the frame.
3. Secure the desktop to the frame using the provided screws.

4.4 Control Panel and Power Connection

1. Mount the control panel to the desired location on the underside of the desktop.
2. Connect the control panel cable to the control box.
3. Connect the power adapter to the control box and then plug it into a wall outlet.

5. Instrukcja obsługi

5.1 Panel sterowania ponadview

Image 5.1: The intelligent control panel features buttons for height adjustment, a reset function, and two programmable memory presets for sitting and standing positions.

• Strzałki w górę/w dół: Adjust the desk height manually.
• Reset Button (Middle): Used for initial calibration or resetting the desk.
• Preset 1 (Sitting Icon): Memory preset for a preferred sitting height.
• Preset 2 (Standing Icon): Memory preset for a preferred standing height.

5.2 Initial Calibration (Reset)

After initial setup or if the desk is not moving smoothly, perform a reset:

1. Naciśnij i przytrzymaj Nastawić button (middle button) until the desk moves to its lowest position, then slightly rises. Release the button once movement stops. This calibrates the desk's height sensors.

5.3 Regulacja wysokości

• Naciśnij i przytrzymaj Up strzałka, aby podnieść biurko.
• Naciśnij i przytrzymaj W dół strzałka aby obniżyć biurko.
• Notatka: The desk may continue to move for a short duration after releasing the button. This is normal operation.

5.4 Ustawianie ustawień pamięci

To save your preferred sitting or standing height:

1. Dostosuj wysokość biurka do swoich potrzeb, korzystając ze strzałek w górę/w dół.
2. Naciśnij i przytrzymaj albo Preset 1 (Sitting) or Preset 2 (Standing) button for approximately five seconds until the display blinks. This indicates the height has been saved.
3. To move the desk to a saved preset height, simply press the corresponding preset button once.

6. Funkcje

• Przestronny blat w kształcie litery L: The 63" x 43" L-shaped work surface, crafted from environmentally sourced splice board, provides ampmiejsce na wiele monitorów i niezbędne akcesoria biurowe.
• Stable 4-Leg Frame: Constructed with an industrial-grade steel frame, supporting a maximum weight capacity of up to 176 lbs (80 kg).
• Podwójny-Stage Legs: Offers continuous height adjustment from 28.3" to 46" (71.9 cm to 116.8 cm).
  

  Image 6.1: Detail of the desk's dual-stage legs, illustrating the continuous height adjustment capability.
• Inteligentny panel sterowania LED: User-friendly control panel with memory functions for easy adjustment and saving of preferred sitting and standing heights.
• Cicha praca: Equipped with an ultra-quiet dual motor system, operating below 50dB for a distraction-free work environment.
• Materiały certyfikowane: Desktop materials are compliant with CARB and TSCA Title VI standards for formaldehyde emission.
  

  Image 6.2: Certifications displayed on the desk surface, indicating compliance with environmental and safety standards.

7. Specyfikacje

Image 7.1: Dimensional diagram illustrating the desktop size and adjustable height range of the desk frame.

8. Konserwacja

• Czyszczenie: Przetrzyj powierzchnię biurka i ramę miękką szmatką.amp szmatką. Unikaj silnych środków chemicznych i ściernych środków czyszczących.
• Kontrola połączenia: Periodically check all screws and cable connections to ensure they remain tight and secure.
• Obstruction Clearance: Always ensure there are no obstructions above or below the desk when adjusting its height.

9. Rozwiązywanie Problemów

9.1 Desk Not Moving or Erratic Movement

• Sprawdź moc: Upewnij się, że zasilacz jest prawidłowo podłączony do biurka i do sprawnego gniazdka ściennego.
• Sprawdź połączenia: Verify all motor and control panel cables are firmly connected to the control box.
• Perform Reset: Follow the initial calibration steps (Section 5.2) by pressing and holding the Reset button until the desk completes its cycle.
• Przeciążać: Reduce the weight on the desk to ensure it is within the 176 lbs (80 kg) capacity.

9.2 Squeaking During Adjustment

• Ensure all assembly screws are tightened. Loose connections can sometimes cause noise.
• If squeaking persists, contact customer support. Do not attempt to lubricate internal motor components.

9.3 Monitor Arm / Keyboard Tray Interference

• Due to the design of the desk frame, the frame may be close to the edge of the desktop. This can affect the mounting of some monitor arm clamps or the clearance for certain keyboard trays. Consider alternative mounting solutions or desk accessories if interference occurs.

9.4 Visible Desktop Seam

• The desktop is a splice board design, meaning it consists of multiple sections joined together. A visible seam where these sections meet is a characteristic of this design and not a defect.

10 Ważne uwagi

• Prędkość regulacji: The desk adjusts height at a controlled speed. This is a design feature to ensure stability and safety during movement.
• Zarządzanie kablami: While a cable management tray is included, consider additional cable ties or routing solutions to keep cables tidy, especially for the motor connection cable.