1. Wprowadzenie
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Yoqanr ATX Open Frame PC Test Bench. Designed for enthusiasts and professionals, this test bench offers an open-air solution for PC component testing, showcasing, and water cooling setups. It supports ATX, Micro ATX, and Mini ITX motherboards.
Figure 1.1: Assembled Yoqanr ATX Open Frame PC Test Bench with components.
2. Informacje dotyczące bezpieczeństwa
- Always disconnect power from all components before assembly or maintenance.
- Ostrożnie obchodź się z elementami, aby zapobiec uszkodzeniom spowodowanym elektrycznością statyczną. Jeśli masz dostęp, używaj antystatycznej opaski na nadgarstek.
- Ensure all screws are tightened securely, but do not overtighten to avoid stripping threads.
- Małe części i narzędzia należy trzymać z dala od dzieci.
- Place the test bench on a stable, level surface to prevent tipping.
- Avoid placing the test bench in areas with high humidity or extreme temperatures.
3. Zawartość opakowania
Przed rozpoczęciem montażu sprawdź, czy w opakowaniu znajdują się wszystkie wymienione poniżej elementy.
Rysunek 3.1: Wszystkie komponenty zawarte w pakiecie.
- Aluminum frame profiles
- Metal blue lamp kluczyk do włączania zasilania
- Screw bag with various fasteners
- Uchwyt do przenoszenia
- Wall-mounted accessories (optional use)
- Motherboard standoffs and screws
- Power supply fixture (standard ATX, replaceable SFX)
- Hard disk (HDD/SSD) mounting brackets
- Graphics card fixed brackets (supports upward or downward installation)
- Water cooling mounting brackets (supports 120/240/360mm radiators)
4. Instrukcja montażu
Follow these steps carefully to assemble your Yoqanr ATX Open Frame PC Test Bench. An assembly video is provided for visual guidance.
Video 4.1: Assembly guide for the Yoqanr ATX Open Frame PC Test Bench. This video demonstrates the step-by-step process of constructing the frame and installing key components.
4.1. Montaż ramy
- Przygotuj komponenty: Unpack all aluminum profiles and hardware. Identify the longer base profiles and shorter vertical support profiles.
- Zmontuj podstawę: Attach the shorter vertical support profiles to the longer base profiles using the provided screws and T-nuts. Ensure they are securely fastened to form the base structure.
- Attach Vertical Uprights: Connect the main vertical uprights to the assembled base. These will form the primary structure for mounting the motherboard and other components.
- Montaż poprzeczek: Secure the horizontal crossbars between the vertical uprights. These provide rigidity and mounting points.
- Mount Handle: Attach the handle to the top crossbar for easy portability.
Figure 4.1: Dimensions of the assembled frame (17.3" x 11").
4.2. Instalacja komponentów
- Instalacja płyty głównej: Install the motherboard standoffs onto the frame at the appropriate positions for your ATX, Micro ATX, or Mini ITX motherboard. Carefully place the motherboard onto the standoffs and secure it with screws.
- Instalacja zasilacza: Mount the ATX power supply using the designated fixture. If using an SFX power supply, replace the standard fixture with the SFX power supply fixture.
- Instalacja karty graficznej: Attach the metal graphics card fixed bracket. The graphics card can be installed either upward or downward. The design accommodates various graphics card lengths.
- Instalacja dysku pamięci masowej: Install up to two hard disk drives (HDDs) or solid-state drives (SSDs) using the universal mounting points.
- Montaż chłodzenia wodnego: The test bench supports 120mm, 240mm, or 360mm water cooling radiators. Mount the radiator and fans using the appropriate brackets. Water cooling can be installed on the front, side, or back, or both sides.
- Optical Drive Installation: If required, install an optical drive in the designated slot.
Rysunek 4.2: Strona view of the test bench with a motherboard, graphics card, and AIO liquid cooler installed.
Rysunek 4.3: Kątowy view showing a complete setup with power supply and liquid cooling.
Rysunek 4.4: Widok z góry na dół view illustrating component layout, including multiple graphics cards and storage drives.
5. Instrukcja obsługi
Once all components are securely installed and connected, follow these steps to operate your PC test bench:
- Podłącz urządzenia peryferyjne: Connect your monitor, keyboard, mouse, and any other necessary peripherals to the motherboard's I/O ports or graphics card.
- Podłącz zasilanie: Plug the power supply unit (PSU) into a wall outlet. Ensure the PSU switch is in the "ON" position.
- Włączanie: Press the metal blue lamp power on key located on the test bench. The system should initiate the boot process.
- Testowanie systemu: Monitor component temperatures and performance during initial boot-up and under load to ensure stability.
6. Konserwacja
Regular maintenance helps ensure the longevity and optimal performance of your test bench and its components.
- Czyszczenie: Periodically clean the aluminum frame and components with a soft, dry cloth. For stubborn dust, use compressed air. Avoid liquid cleaners directly on electronic components.
- Zarządzanie kablami: Keep cables tidy to improve airflow and prevent accidental disconnections.
- Kontrola śrub: Occasionally check all screws and fasteners to ensure they remain tight.
- Kontrola komponentów: Inspect fans, radiators, and other components for dust buildup or signs of wear.
7. Rozwiązywanie Problemów
W tej sekcji omówiono typowe problemy, jakie mogą wystąpić podczas montażu lub eksploatacji.
- System się nie włącza:
- Ensure the power supply is connected to a working outlet and its switch is ON.
- Sprawdź, czy wszystkie kable zasilające (24-pinowy ATX, procesora, karty graficznej) są solidnie podłączone do płyty głównej i podzespołów.
- Check the connection of the power on key to the motherboard's front panel headers.
- Brak wyjścia wyświetlacza:
- Confirm the monitor is connected to the graphics card (not the motherboard's integrated graphics, unless no discrete GPU is present).
- Ponownie włóż kartę graficzną do gniazda PCIe.
- Check that the graphics card has adequate power from the PSU.
- Motherboard Mounting Issues:
- Ensure correct standoffs are used for your motherboard form factor (ATX, Micro ATX, Mini ITX).
- If holes do not align perfectly, slight adjustments may be needed, or ensure you are using the correct mounting points for your specific board.
- Luźne elementy:
- Double-check all screws and connections. The open frame design requires secure fastening of all parts.
8. Specyfikacje
| Funkcja | Szczegół |
|---|---|
| Nazwa modelu | Yoqanr ATX Open Frame PC Test Bench |
| Wymiary (dł. x szer. x wys.) | 17.3 x 17.3 x 17.3 inches (44 x 28 cm for main frame) |
| Waga przedmiotu | 3.16 funta |
| Tworzywo | Aluminium, Metal |
| Zgodność płyty głównej | ATX, Micro ATX, Mini ITX (up to 12"x9.6") |
| Wsparcie zasilania | Standard ATX (replaceable SFX fixture) |
| Graphics Card Position | PCI-e x 1 (customized metal fixed, upward/downward installation, unlimited length) |
| Zatoki dysków pamięci masowej | 2 (universal for SSD/HDD) |
| Zatoki napędów optycznych | 1 |
| Wsparcie chłodzenia wodnego | 120mm, 240mm, 360mm radiators (front/side/back/both) |
| Porty USB | 2 x USB 2.0 (via front panel key) |
| Dołączone akcesoria | Power on key, screw bag, handle, wall-mounted accessories |
9. Gwarancja i wsparcie
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the product packaging or contact Yoqanr customer support.
For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Yoqanr customer service through the retailer's platform or the official Yoqanr webstrona.
Informacje kontaktowe: Please refer to your purchase documentation or the Yoqanr brand store on Amazon for the most up-to-date support contact details.
