Produkt ponadview
The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.
Image: The Stealth JHT100 tower heater in a room setting, showcasinze względu na jego elegancki wygląd.
Informacje dotyczące bezpieczeństwa
Your safety is paramount. Please read and understand all safety instructions before operating this appliance.
- Zabezpieczenie przed przewróceniem: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
- Zabezpieczenie przed przegrzaniem: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
- Materiały trudnopalne V0: Constructed with V0 flame retardant materials for enhanced safety.
- Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
- Zawsze należy upewnić się, że grzejnik jest umieszczony na stabilnej i równej powierzchni.
- Nie przykrywaj grzejnika ani nie blokuj jego wlotów/wylotów powietrza.
- Materiały łatwopalne należy trzymać w odległości co najmniej 3 stóp (0.9 metra) od grzejnika.
- Do not use in wet or moist locations.
Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.
Zawartość opakowania
Po rozpakowaniu upewnij się, że wszystkie wymienione poniżej elementy są obecne i nieuszkodzone:
- Stealth JHT100 Tower Heater Unit
- Detachable Base (2 halves)
- Mounting Screws for Base
- Remote Control (with pre-installed battery and plastic tab)
- Instrukcja obsługi
Organizować coś
- Montaż podstawy:
Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.
Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.
- Konfiguracja pilota zdalnego sterowania:
The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.
- Podłączenie zasilania:
Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.
Instrukcja obsługi
The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.
Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.
1. Włączanie/wyłączanie zasilania
- Główny wyłącznik zasilania: Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
- Unit Power Button: Naciśnij Przycisk zasilania (
) na panelu sterowania lub pilocie, aby włączyć lub wyłączyć grzejnik.
2. Heat Modes
The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.
- Naciśnij Przycisk trybu (
) to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).
Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).
3. Oscylacja
Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.
- Naciśnij Przycisk oscylacji (
) to start or stop the oscillation function.
Obraz: z góry view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.
4. Funkcja timera
Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.
- Naciśnij Przycisk timera (
) repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H). - To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.
Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.
5. Pilot zdalnego sterowania
The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.
Konserwacja
Regularna konserwacja zapewnia optymalną wydajność i długą żywotność grzejnika.
- Czyszczenie filtra powietrza: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
- Czyszczenie zewnętrzne: Przetrzyj zewnętrzną część grzejnika miękką szmatką.amp ściereczka. Nie należy używać środków czyszczących o właściwościach ściernych ani rozpuszczalników.
- Always unplug the heater from the power outlet before performing any cleaning or maintenance.
Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.
Rozwiązywanie problemów
If your heater is not functioning as expected, please consult the following common issues and solutions:
| Problem | Możliwa przyczyna | Rozwiązanie |
|---|---|---|
| Grzejnik nie włącza się. |
|
|
| Ogrzewanie niespodziewanie się wyłącza. |
|
|
| Niska emisja ciepła. |
|
|
Specyfikacje
- Marka: Podstęp
- Numer modelu: JHT100
- Współczynnik kształtu: Wieża
- Wydzielanie ciepła: 1500 watów
- Ampwymazać: 12.5 Amps
- Wymiary produktu: 8 x 11 x 32 cala
- Waga przedmiotu: 10.58 funta
- Źródło zasilania: Elektryczny przewodowy
- Metoda ogrzewania: Convection, Forced Air
- Oscylacja: 70° Wide Oscillation
- Regulator czasowy: 1-6 godziny
- Funkcje bezpieczeństwa: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug
Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.
Gwarancja i wsparcie
Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.
The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.
If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.
For support, please refer to the contact information provided on your warranty card or visit the official Stealth webstrona.