Technaxx 4G Night Vision Trail Camera TX-189 with 5W Solar Panel

Wstęp

This manual provides detailed instructions for the setup, operation, and maintenance of your Technaxx 4G Night Vision Trail Camera TX-189, accompanied by a 5W Solar Panel. This system is designed for outdoor surveillance, offering 4G mobile network connectivity, high-definition video recording, advanced night vision, and motion detection capabilities, powered by rechargeable batteries and continuous solar charging.

Zawartość opakowania

Sprawdź, czy w przesyłce znajdują się wszystkie wymienione poniżej elementy:

• 1x Technaxx 4G Wildcam TX-189 Camera
• Panel słoneczny 1x5 W
• 1x kabel zasilający USB
• 1x anteny
• 3x Screws and Wall Plugs
• 2x wsporniki montażowe
• 1x Assembly Fastener (Strap)
• 4x Rechargeable Batteries (Lithium-ion)
• 1x Instrukcja obsługi

Image: All components included in the package, including the camera, solar panel, antenna, cables, mounting hardware, and batteries.

Organizować coś

1. Montaż i ładowanie akumulatora

The camera operates on 4 Lithium-ion batteries. Ensure these are fully charged before first use. To install:

1. Otwórz obudowę kamery poprzez odpięcie bocznych zatrzasków.
2. Insert the four provided Lithium-ion batteries into the battery compartment, observing correct polarity.
3. Dokładnie zamknij obudowę.

Obraz: Zbliżenie view of the camera's robust latch, which secures the housing.

Image: The battery compartment with four Lithium-ion batteries correctly inserted.

2. SIM Card and MicroSD Card Insertion

For 4G connectivity and local storage:

1. Locate the SIM card slot and MicroSD card slot inside the camera housing.
2. Insert a Nano SIM card (not included) with an active 4G data plan. Ensure the SIM card's PIN is disabled before insertion.
3. Insert a MicroSD card (up to 256GB, not included) for video and image storage.
4. Close the camera housing securely to maintain its IP66 waterproof rating.

3. Mocowanie anteny

Screw the provided antenna onto the designated port on the camera for optimal 4G signal reception.

4. Montaż kamery i panelu słonecznego

The camera and solar panel can be mounted using the provided strap or mounting brackets.

• Mocowanie paska: Thread the assembly fastener (strap) through the camera's mounting slots and secure it around a tree or pole.
• Montaż wspornika: Use the screws and wall plugs to attach the mounting brackets to a flat surface. Then, attach the camera and solar panel to the brackets.

Position the solar panel in a location that receives maximum direct sunlight throughout the day to ensure continuous charging.

Image: The camera securely mounted to a tree trunk with the included strap.

Image: The camera and its accompanying solar panel mounted together on a tree, connected by a cable.

5. Instalacja i parowanie aplikacji

Download the free "Security Premium" app from your device's app store (iOS and Android compatible). Follow the in-app instructions to pair your camera with your smartphone. This typically involves scanning a QR code on the camera or entering a device ID.

Instrukcja obsługi

1. Włączanie/wyłączanie zasilania

Once batteries are installed and the housing is closed, power on the camera using the designated power button (refer to the camera's internal layout for exact location). The camera will initiate its startup sequence.

2. Detekcja ruchu PIR

The camera features a PIR (Passive Infrared) motion sensor that detects movement up to 12 meters. When motion is detected, the camera will automatically trigger recording or capture images based on your settings. You will receive instant push notifications on your smartphone via the "Security Premium" app.

3. Wizja nocna

Equipped with advanced night vision technology and 8x IR LED lights, the camera provides clear images and videos up to 15 meters in low-light or complete darkness. The IR lights operate without a visible glow, ensuring discreet surveillance.

4. Remote Access and Live View

Through the "Security Premium" app, you can access a live view from your camera remotely, monitor the area, and adjust settings from anywhere with an internet connection.

5. Komunikacja dwukierunkowa

The integrated microphone and speaker enable two-way audio communication, allowing you to listen in and speak through the camera via the app.

6. Nagrywanie i przechowywanie wideo

The camera records video in 2560x1440 Full HD resolution at up to 15 frames per second (AVI format). Recordings are stored on the inserted MicroSD card (up to 256GB). You can manage and access recorded footage za pośrednictwem aplikacji.

Konserwacja

• Czyszczenie: Regularnie czyść obiektyw aparatu i powierzchnię panelu słonecznego miękką, miękką szmatką.amp Aby zapewnić optymalną wydajność i efektywność ładowania, należy używać ściereczki. Unikać środków czyszczących o działaniu ściernym.
• Pielęgnacja baterii: While the solar panel provides continuous charging, periodically check the battery status via the app. If the camera is stored for extended periods, ensure batteries are charged to prevent deep discharge.
• Aktualizacje oprogramowania układowego: Check the "Security Premium" app or Technaxx website for any available firmware updates to ensure your camera operates with the latest features and security enhancements.
• Wodoodporność: Always ensure the camera housing is securely latched after accessing the battery, SIM, or MicroSD card compartments to maintain its IP66 weather resistance.

Rozwiązywanie problemów

• Brak połączenia sieciowego:
  • Ensure the Nano SIM card has an active 4G data plan and its PIN is disabled.
  • Check 4G signal strength in the camera's location via the app. Relocate the camera if the signal is weak.
  • Sprawdź, czy antena jest solidnie zamocowana.
• Camera Not Powering On / Short Battery Life:
  • Confirm batteries are correctly inserted and fully charged.
  • Ensure the solar panel is clean and positioned to receive maximum direct sunlight.
  • Sprawdź połączenie między panelem słonecznym a kamerą.
• Słaba jakość obrazu/wideo:
  • Wyczyść obiektyw aparatu.
  • Ensure sufficient lighting for daytime recording or that night vision is active in low light.
• Detekcja ruchu nie jest aktywowana:
  • Zmień ustawienia czułości czujnika PIR w aplikacji.
  • Ensure there are no obstructions blocking the PIR sensor's field of view.
• Cannot Download/Play Recorded Videos:
  • Ensure the MicroSD card is properly inserted and not full.
  • Format the MicroSD card if issues persist (this will erase all data).
  • Check your device's compatibility with AVI video format.

Specyfikacje

Gwarancja i wsparcie

For warranty information and technical support, please refer to the official Technaxx webOdwiedź stronę internetową lub skontaktuj się bezpośrednio z działem obsługi klienta. Zachowaj paragon jako dowód zakupu na wypadek ewentualnych roszczeń gwarancyjnych.