KOORUI Single Monitor Arm Desk Mount (Model KR20Y) Instruction Manual

Wstęp

Dziękujemy za zakupasing the KOORUI Single Monitor Arm Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

Informacje dotyczące bezpieczeństwa

WARNING: Failure to read and follow all instructions may result in personal injury or property damage.

• Przed montażem upewnij się, że wszystkie elementy są obecne i nieuszkodzone. Nie używaj uszkodzonych części.
• This product is designed for monitors weighing between 2-9 kg (4.4-19.8 lbs) and screen sizes from 17 to 32 inches. Do not exceed the maximum load capacity or use with incompatible screen sizes.
• The VESA mounting patterns supported are 75x75mm and 100x100mm. Verify your monitor's VESA pattern before installation.
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the monitor arm and your monitor.
• Perform all adjustments slowly and carefully. Do not overtighten screws.
• Trzymaj dzieci i zwierzęta z dala od siebie podczas montażu. Małe części mogą stanowić zagrożenie zadławienia.

Zawartość opakowania

Sprawdź, czy wszystkie części wymienione poniżej znajdują się w przesyłce. Jeśli brakuje którejkolwiek części lub jest ona uszkodzona, skontaktuj się z obsługą klienta.

Specyfikacje

• Model: KR20Y
• Typ montażu: Tabletop Mount (Clamp lub przelotka)
• Tworzywo: Metal
• Kolor: Czarny
• Kompatybilny rozmiar monitora: 17-32 cala
• Nośność: 2-9 kg (4.4-19.8 funtów)
• Zgodność z VESA: 75x75mm, 100x100mm
• Zakres przechyłu: +85° do -30°
• Zakres obrotu: ±90°
• Rotation (Portrait/Landscape): 360°
• Arm Joint Rotation: 360°
• Maximum Arm Height: Około 400 mm (15.7 cala)
• Maximum Arm Extension: Około 530 mm (20.8 cala)
• Clamp Mount Desktop Thickness: 20–80 mm (0.78–3.14 cala)
• Grommet Mount Desktop Thickness: 20–90 mm (0.78–3.54 cala)
• Średnica otworu przelotki: 10–50 mm (0.39–1.96 cala)

Konfiguracja i instalacja

Before proceeding, ensure your desk and monitor meet the specifications listed above. This monitor arm offers two installation methods: C-Clamp i mocowanie przelotki.

1. Sprawdzenie zgodności

Before installation, ensure your monitor and desk meet the following requirements:

• Rozmiar monitora: 17-32 cala
• Waga monitora: 2-9 kg (4.4-19.8 funtów)
• Wzór VESA: 75x75mm lub 100x100mm

Image: Visual guide to monitor arm compatibility, detailing supported screen sizes (17-32 inches), weight capacity (2-9 kg), and VESA mounting patterns (75x75mm, 100x100mm).

2. Wybierz metodę montażu

Image: Diagrams illustrating both the C-Clamp mount (left) and Grommet mount (right) installation methods for securing the monitor arm to a desk.

3. Zamontuj płytkę VESA do monitora

1. Ostrożnie połóż monitor ekranem do dołu na miękkiej i czystej powierzchni.
2. Dopasuj płytkę VESA do otworów montażowych znajdujących się z tyłu monitora (75 x 75 mm lub 100 x 100 mm).
3. Przymocuj płytkę VESA do monitora za pomocą odpowiednich śrub z zestawu montażowego. Nie dokręcaj zbyt mocno.

4. Install Monitor Arm Base

Follow the instructions specific to your chosen mounting method (C-Clamp or Grommet) to securely attach the arm base to your desk.

5. Attach Monitor to Arm

1. With assistance if needed, carefully slide the monitor (with VESA plate attached) onto the arm's VESA head.
2. Ensure the monitor is securely seated. Some VESA heads may have a locking screw; tighten it if present.

Obsługa i regulacja

The KOORUI Monitor Arm allows for flexible positioning to achieve an ergonomic viewing experience. Adjustments should be made slowly and carefully.

1. Gas Spring Tension Adjustment (Height Adjustment)

The arm's vertical movement is controlled by a gas spring. If the monitor sags or floats up, you need to adjust the gas spring tension.

• To increase tension (for heavier monitors or if the arm sags), turn the adjustment screw (usually located on the arm joint) clockwise.
• To decrease tension (for lighter monitors or if the arm floats up), turn the adjustment screw counter-clockwise.
• Adjust gradually and test the arm's movement until the monitor stays at the desired height without drifting.

For a visual guide on adjusting the monitor arm vertically, please refer to the official "How to Adjust the KOORUI Monitor Arm" video provided by the manufacturer.

2. Tilt, Swivel, and Rotation

The monitor arm offers extensive movement capabilities:

• Przechylenie: The VESA plate can tilt +85° (upwards) to -30° (downwards). Gently push or pull the top/bottom of your monitor to adjust the vertical angle.
• Obracać: The VESA plate can swivel ±90° (left/right). Rotate the monitor horizontally to adjust the viewkąt.
• Obrót: The VESA plate allows for 360° rotation, enabling you to switch between landscape and portrait orientations.
• Arm Joint Rotation: The arm joints themselves can rotate 360°, providing flexibility in positioning the arm horizontally.

Image: Diagram illustrating the various tilt, swivel, and rotation capabilities of the monitor arm, including 360° arm joint rotation, 180° swivel, +85°/-30° tilt, and 360° screen rotation.

3. Ergonomic Positioning

The monitor arm facilitates various ergonomic setups, including standing desk configurations, to reduce strain during long work sessions.

Image: A person working at a standing desk, demonstrating how the monitor arm allows for comfortable vertical positioning of the screen for an ergonomic posture.

Zarządzanie kablami

To maintain a tidy workspace and prevent cable damage, utilize the integrated cable management system.

1. Route your monitor cables (power, video, etc.) along the underside of the arm.
2. Open the cable covers on the arm sections.
3. Tuck the cables neatly inside the channels.
4. Close the cable covers to secure the cables.

Obraz: Tył view of a monitor mounted on the arm, showing cables neatly routed through the arm's integrated cable management channels.

Utilizing the monitor arm and its cable management features helps to free up valuable desk space, contributing to a more organized and efficient work environment.

Image: A desk setup with a monitor mounted on the arm, showcasing the increased usable desk space and organized appearance achieved by using the arm and its cable management.

Konserwacja

• Regularnie sprawdzaj wszystkie śruby i połączenia, aby mieć pewność, że są dobrze dokręcone i bezpieczne.
• Clean the arm with a soft, damp szmatką. Unikaj środków czyszczących o działaniu ściernym i rozpuszczalników.
• Do not attempt to disassemble the gas spring mechanism. It contains high-pressure gas.

Rozwiązywanie problemów

Gwarancja i wsparcie

• Gwarancja producenta: Produkt objęty jest 3-letnią gwarancją producenta.
• Serwis naprawczy: Free repair service is available during the warranty period.
• Recykling: Certified PC recycling with free collection is available.
• Godziny wsparcia: Monday to Friday, 9:30 AM - 5:30 PM (excluding weekends and public holidays).
• For further assistance, please contact KOORUI customer support.