oneisall PJ05038

oneisall Replacement Guide Combs for DTJ-001 Clipper Instruction Manual

Model: PJ05038

Ważne informacje dotyczące bezpieczeństwa

Produkt ponadview

The oneisall Replacement Guide Combs (Model PJ05038) are designed specifically for use with the oneisall DTJ-001 clipper. This set provides six different comb sizes, allowing for precise control over hair length during trimming.

Image showing the six oneisall guide comb sizes (3mm, 6mm, 9mm, 12mm, 18mm, 24mm) arranged with examples of different pet hair lengths they can achieve.

Rysunek 1: Koniecview of the six guide comb sizes and their application for various hair lengths.

Instrukcje instalacji

To attach a guide comb to your oneisall DTJ-001 clipper:

  1. Ensure the clipper is turned off and unplugged from its power source for safety.
  2. Select the desired guide comb size (e.g., 3mm, 6mm, 9mm, 12mm, 18mm, or 24mm).
  3. Align the comb with the clipper blade. The comb should slide onto the blade assembly smoothly from the front.
  4. Gently push the comb down until it clicks securely into place. Do not force the comb, as this may cause damage.

To remove a guide comb:

  1. Upewnij się, że maszynka jest wyłączona i odłączona od zasilania.
  2. Grip the comb firmly and gently pull it upwards and away from the clipper blade until it detaches.
Image illustrating the process of attaching a guide comb to the oneisall DTJ-001 clipper, showing the comb being slid onto the clipper blade.

Figure 2: Proper method for attaching a guide comb to the clipper.

Instrukcja obsługi

Once a guide comb is securely attached to your oneisall DTJ-001 clipper, you can begin trimming. The comb acts as a guard, ensuring a consistent cutting length. Always refer to your DTJ-001 clipper's instruction manual for detailed operating procedures and safety guidelines specific to the clipper itself.

Konserwacja i czyszczenie

Regular cleaning of your guide combs is essential for hygiene, to ensure optimal performance, and to extend their lifespan.

  1. After each use, remove the guide comb from the clipper.
  2. Use a small brush (often included with clippers) to remove any trapped hair or debris from the comb's teeth and interior.
  3. The combs can be rinsed under running water. Use mild soap if necessary.
  4. Ensure the combs are completely dry before storing them or reattaching them to the clipper. Moisture can lead to damage or rust on clipper blades.
  5. Store combs in a clean, dry place, preferably in their original packaging or a dedicated storage case.

Rozwiązywanie problemów

ProblemMożliwa przyczynaRozwiązanie
Guide comb does not fit the clipper.The guide combs (Model PJ05038) are specifically designed for the oneisall DTJ-001 clipper. They may not be compatible with other clipper models, even from the same brand.Verify that your clipper is the oneisall DTJ-001 model. If it is a different model, these combs are not compatible.
Comb is difficult to attach or remove.Incorrect alignment, debris obstructing the attachment mechanism, or comb is not fully dry.Ensure the comb is correctly aligned with the clipper blade. Check for any hair or debris in the attachment area and clean if necessary. Ensure the comb is completely dry. Do not force the comb.

Specyfikacje

FunkcjaSzczegół
Nazwa produktuReplacement Guide Combs
Markajedność
Compatible Clipper ModelDTJ-001
Item Model Number (Combs)PJ05038
Liczba grzebieni6
Comb Sizes3 mm 6 mm 9 mm 12 mm 18 mm 24 mm
KolorCzarny
Zalecane zastosowanieLamówka
Zgodność typu włosówWszystko

Gwarancja i wsparcie

oneisall products are designed for durability and performance. For any inquiries or assistance, please refer to the following: