YONHAN 25/10 Amp LiFePO4 Car Battery Charger User Manual

1. Wprowadzenie

This manual provides detailed instructions for the safe and effective use of your YONHAN 25/10 Amp LiFePO4 Car Battery Charger. This intelligent charger is designed to maintain, charge, and repair 12V and 24V lead-acid (STD, AGM, GEL, WET) and LiFePO4 batteries, offering multiple protection features and a smart repair function to extend battery life. Please read this manual thoroughly before operation.

2. Instrukcje bezpieczeństwa

• Podczas pracy z akumulatorami należy zawsze nosić okulary ochronne i odzież ochronną.
• Podczas ładowania należy zapewnić odpowiednią wentylację, aby zapobiec gromadzeniu się gazu.
• Nigdy nie pal ani nie pozwól, aby w pobliżu akumulatora lub silnika pojawiły się iskry lub płomienie.
• Connect the charger to the battery before plugging it into the AC power outlet. Disconnect in reverse order.
• Nie ładuj zamarzniętych akumulatorów.
• Trzymaj ładowarkę z dala od wody, deszczu i nadmiernej wilgoci.
• This charger is equipped with multiple protection features including overheat, overcurrent, electric shock, short circuit, reverse connection, overvoltage, niska objętośćtagi ochrony przeciwpożarowej.

Obraz: The YONHAN battery charger's display showing various intelligent multiple protection icons, including overheat, overcurrent, electric shock, short circuit, reverse connect, overvoltage, niska objętośćtagi ochrony przeciwpożarowej.

3. Zawartość opakowania

Sprawdź, czy wszystkie elementy są obecne:

• YONHAN 25/10 Amp LiFePO4 Car Battery Charger
• Bateria Clamps (Czerwony i Czarny)
• Instrukcja obsługi

4. Koniec produktuview

4.1. Funkcje

• Upgrade Boost Mode: Fully automatic jump starting, booster mode, charge, and maintain. Quickly revives deeply discharged batteries.
• 5-Level Adjustable Current: Offers 25-Amp, 20A, 8A, 2A, and AUTO-A settings to meet various charging needs.
• Big Digital Display: Provides real-time information on detection, power, current, voltage i temperaturę.
• Inteligentna wielokrotna ochrona: Comprehensive safety features against overheat, overcurrent, electric shock, short circuit, reverse connection, overvoltage, niska objętośćtagi ogień.
• Szybsze ładowanie: Up to 30% faster than standard 12V/8A chargers, with 12V/10A and 24V/5A high-speed quick charge capabilities.
• Smart Repair Function: Utilizes low-frequency pulse repair technology to desulfurize and rejuvenate old or idle batteries.
• Tryb zimowy/letni: Intelligent detection adjusts charging parameters based on ambient temperature.

Obraz: The YONHAN 25/10 Amp LiFePO4 Car Battery Charger, showcasing its compact design, digital display, and attached battery clampi przewód zasilający.

Obraz: The YONHAN charger's display highlighting the 5-level adjustable current options: 2A, 8A, AUTO-A, 20A, and 25A, indicating its versatility for different charging needs.

4.2. Sterowanie i wyświetlacz

• Wyświetlacz cyfrowy: Pokazuje wolumen w czasie rzeczywistymtage (V), current (A), temperature (°C), and battery charge percentagnp. (20%, 40%, 60%, 80%, 100%).
• Przycisk wyboru trybu: Allows manual selection of battery types (STD, LiFePO4, AGM/GEL, Motorcycle) and the Repair function.
• Current Adjustment Buttons: Used to select the desired charging current (2A, 8A, AUTO-A, 20A, 25A).

Obraz: Zbliżenie view of the YONHAN battery charger's large digital display, showing detailed information such as voltage, current, temperature, and battery charge status.

Obraz: The YONHAN charger highlighting its touch buttons for precise mode switching, including options for Standard, Start/Stop, Water battery, Motorcycle, and Repair modes.

5. Konfiguracja

1. Rozpakować: Ostrożnie wyjmij ładowarkę i wszystkie akcesoria z opakowania.
2. Umieszczenie: Place the charger on a stable, dry, and well-ventilated surface, away from direct sunlight, heat, or moisture.
3. Przygotowanie baterii: Upewnij się, że zaciski akumulatora są czyste i nie mają śladów korozji.
4. Połącz Clamps:
   • Połącz CZERWONY dodatni (+) clamp do dodatniego (+) zacisku akumulatora.
   • Połącz CZARNY ujemny (-) clamp do ujemnego (-) zacisku akumulatora.
5. Podłączenie zasilania: Plug the charger's AC power cord into a standard 120V AC wall outlet. The charger will automatically detect the battery voltage and display information on the screen.

Obraz: The YONHAN battery charger connected to a car battery, with the red clamp na biegunie dodatnim i czarnymamp on the negative terminal, and the digital display showing 13.6V.

6. Instrukcja obsługi

6.1. Automatic Detection and Mode Selection

Upon connecting to a battery and power, the charger automatically detects the battery type (12V or 24V) and displays the current voltage, temperature, and charge level. Use the WYBÓR TRYBU button to cycle through available charging modes if automatic selection is not desired or to select a specific battery type (STD, LiFePO4, AGM/GEL, Motorcycle) or the Repair function.

6.2. Regulacja prądu ładowania

Użyj AKTUALNY buttons to select the desired charging amperage: 2A, 8A, AUTO-A, 20A, or 25A. The AUTO-A mode allows the charger to intelligently select the optimal current.

6.3. Repair Function (Desulfurization)

The Smart Repair Function uses low-frequency pulse technology to desulfurize and restore old, idle, or weak batteries. If the charger detects a battery requiring repair, it may automatically enter this mode (indicated by 'DFS' on the screen). You can also manually select the 'REPAIR' mode using the Mode Selection button. For car batteries, a repair cycle typically takes 4 hours or more. For motorcycle batteries, it may take less time.

Obraz: The YONHAN charger illustrating its Smart Repair Function, which uses low-frequency pulse repair technology to address issues like long idle times, low voltage, and battery aging.

6.4. Tryb Booster

The Booster Mode is designed to quickly revive deeply discharged batteries. When selected, the charging current will reach its maximum value for approximately 200 seconds to provide a rapid boost.

Obraz: The YONHAN charger's display showing the 'BOOSTER MODE' activated, indicating that the maximum charging current will be applied for 200 seconds to revive a deeply discharged battery.

7. Konserwacja

• Czyszczenie: Wipe the charger's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives.
• Składowanie: Przechowuj ładowarkę w chłodnym, suchym miejscu, gdy nie jest używana. Upewnij się, że kable są starannie zwinięte i niezagięte.
• Kontrola kabla: Regularnie sprawdzaj stan akumulatoraampSprawdź przewody i kable pod kątem uszkodzeń, zużycia lub korozji. W razie potrzeby wymień.

8. Rozwiązywanie Problemów

• Ładowarka się nie włącza: Ensure the AC power cord is securely plugged into a live outlet. Check the power outlet with another device.
• Brak wyświetlacza/nieprawidłowy odczyt: Sprawdź, czy bateria jest naładowanaamps are correctly and securely connected to the battery terminals (red to positive, black to negative). Ensure the battery voltage is within the charger's operating range (12V/24V).
• Ładowanie nie rozpoczyna się: Confirm the correct charging mode is selected for your battery type. If the battery is severely discharged, the charger may enter a repair cycle first.
• Kody błędów: Refer to the specific error codes in the full user manual for detailed explanations and solutions.

9. Specyfikacje

10. Gwarancja i wsparcie

Warranty and support information for this product was not provided in the available data. Please refer to the product packaging or contact YONHAN customer service for details regarding warranty coverage and technical support.